Lansinoh Affinity Double Electric Breast Pump: Instructions for Use

Congratulations On Your New Lansinoh® Affinity® Double Electric Breast Pump!

The Affinity® Breast Pump provides many of the features moms are looking for in a high-quality double electric breast pump.

• Allows for single or double pumping to save time ?
• Lansinoh® Custom Expression™ Technology allows mom to separately adjust the cycle and suction settings for comfortable and efficient milk expression.
• Provides two phases of expression – the Let-Down Phase and the Expression Phase – to simulate the natural rhythm of breastfeeding.
• Guaranteed to prevent milk backup in tubing and pump.
• AC or battery operated – two options to fit your needs ?
• Small, quiet and lightweight.

If you have any questions, please call our customer service department at 800-292-4794 or email customerservice@lansinoh.com.

Important Safeguards

The Affinity® Breast Pump is a personal care item and for hygienic reasons should never be shared between mothers or resold from one mother to another. Either of these will void the warranty.

If you are a mother who is infected with Hepatitis B, Hepatitis C or Human Immunodeficiency Virus (HIV), pumping breastmilk using the Lansinoh® Affinity® Breast Pump will not reduce or remove the risk of transmitting the virus to your baby through your breastmilk.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to other devices, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving device.
• Increase the separation between the equipment.
• Connect the equipment into an outlet on a circuit different from that to which the other device(s) are connected.
• Consult the manufacturer or field service technician for help.

When using electrical products, especially when children are present, basic safety precautions should always be maintained, including the following:

Read All Instructions Before Using

⚡ Danger: To reduce the risk of electrocution:

• Always unplug this product immediately after using.
• Do not use while bathing.
• Do not place or store this product where it can fall or be pulled into a tub or sink.
• Do not place or drop pump into water or other liquid.
• Do not reach for an electrical product that has fallen into water. Unplug immediately.

⚠️ Warning: To reduce the risk of burns, electrocution, fire, or injury to persons:

• This product should never be left unattended when plugged in.
• Close supervision is necessary when this product is used near children or invalids.
• Use this product only for its intended use as described in this manual.
• Do not use attachments not recommended by the manufacturer.
• Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
• Keep the cord away from heated surfaces.
• Never use while sleeping or drowsy.
• Never drop or insert any object into any opening or tubing.
• Do not use outdoors with the AC adapter or operate where aerosol spray products are being used or where oxygen is being administered.

Save These Instructions along with your receipt for future reference.

Contents

• Important Safeguards
• Quick Start Instructions
• Pump Diagram
• Affinity® Breast Pump Parts
• Cleaning Instructions
• Assembling the Breastmilk Expression Set
• Pumping Tips
• Using the Affinity® Breast Pump
• Power Options
• Breastmilk Storage Guidelines
• Troubleshooting
• Technical Data
• Warranty

Quick Start Instructions

If you are using the Lansinoh® Affinity® Breast Pump for the first time, it is important to read the full instruction manual before you begin.

Start with Phase I (Let-Down Phase)

Turn on power by pressing the On/Off button. This will take you into Phase I – the Let-Down Phase. ?

Phase II (Expression Phase)

The pump will automatically switch into Phase II after two minutes. If you want to bypass or reduce Phase I, press the Let-Down button. The pump will switch to Phase II immediately.

Adjust suction ⚙️

While you are in Phase I or Phase II, you may adjust suction level by pressing (+) or (-) next to the suction icon. (Level 1 (L1) up to Level 8 (L8))

Adjust cycle ⚙️

While you are in Phase II, you may adjust the cycle level by pressing (+) or (-) next to the cycle icon. (Level 1 (L1) up to Level 6 (L6))

Change to Phase I (Let-Down Phase)

At any time during the Expression Phase, you can switch back to Phase I (Let-Down Phase) by pressing the Let-Down button. ?

Stop pumping

Turn the pump off with the On/Off button.

Pump Diagram

The main unit features a control panel with the following:

• Power, On/Off Button: Starts and stops the pump.
• Cycle Increase/Decrease Button: Adjusts the cycle speed.
• LCD Screen: Displays current phase, time, and level settings.
• Suction Increase/Decrease Button: Adjusts the suction strength.
• Let-Down Button: Manually switches to the Let-Down Phase.
• Cycle Indicator: Shows the current cycle setting.
• Time/Level Indicator: Displays session time and current level.
• Low Battery Indicator: ? Signals when batteries are low.
• Let-Down/Stimulation Phase Indicator: Shows the pump is in Phase I. ?
• Expression Phase Indicator: Shows the pump is in Phase II.
• Suction Indicator: Shows the current suction setting.

The pump also has a tubing adapter input port and a battery compartment for 6 AA batteries (not included) located underneath the unit.

Affinity® Breast Pump Parts

The Lansinoh® Affinity® Breast Pump includes the following components:

• Tubing (#50403)
• Breastmilk Expression Set:
  • ComfortFit™ Breast Flange (2) (#50408)
  • Breast Flange Body (2) (#50415)
  • Diaphragm (2) (#50402)
  • Diaphragm Cap (2) (#50410)
  • White Valve (2 + 2 extra) (#50401)
  • 5 oz (150ml) Bottles (2) (#50414)
• Breastmilk Storage Bottle Ring (2) and Sealing Disk (2) (#50406 & #50413)
• AC Adapter/Power Cord (#50409)
• Velcro Strap for Tubing (#50417)

Two extra valves are included. Additional accessories like a carry bag, cooler, larger flanges, and freezer packs are available separately. For ordering, visit www.lansinohstore.com or call 800-292-4794.

Cleaning Instructions

Always wash hands thoroughly with soap and water before handling the Breastmilk Expression Set, the pump, or other attachments.

Disassemble the Breastmilk Expression Set for cleaning. Ensure that the tubing is free of any liquid. Do not operate the pump if liquid is visible in the tubing.

Sanitization Prior To First Use

1. Before the first use, disassemble and boil all parts of the Breastmilk Expression Set for 10 minutes. Ensure enough water is used to keep parts afloat. Do not boil the tubing and tubing connector.
2. Remove all parts from water immediately after boiling.
3. Completely air or towel dry before assembly and next use. Ensure parts are completely dry, as partially dried parts may affect pump operation.

Cleaning

• Set aside the tubing and tubing connector; they do not need to be washed or sanitized as the diaphragm prevents breastmilk contact.
• All other parts of the Breastmilk Expression Set can be cleaned in the upper compartment of a dishwasher or hand-washed with dish soap in hot water. Do not use solvents or abrasives. Rinse with hot, clean water.
• To clean the Breast Pump base, wipe with a damp cloth using only water or mild soap.
• Ensure diaphragms are completely dry before use for best results.
• Do not wash the tubing or tubing connector.

Visually inspect all components for cracks, chips, tears, discoloration, or deterioration before use. Visit www.lansinohstore.com or call 800-292-4794 for guidance or replacement parts.

Assembling the Breastmilk Expression Set

Your Breastmilk Expression Set comes preassembled. Clean parts (except tubing and connector) as per the cleaning instructions. Once clean and dry, assemble as follows:

Diagram Description: The assembly involves connecting the diaphragm cap and diaphragm to the breast flange body, attaching the flange to the body, securing the white valve, screwing on the bottle, and inserting the tubing.

1. Place the purple diaphragm on top of the breast flange body. Twist the clear diaphragm cap onto the breast flange body, enclosing the diaphragm. The diaphragm can be used on either side. Ensure the cap is twisted tightly.
2. Push the breast flange into the breast flange body.
3. Gently secure the white valve into the bottom of the breast flange. Handle the small white valve with care.
4. Screw the breastmilk storage bottle onto the breast flange body.
5. Insert the tubing into the back of the clear diaphragm cap, ensuring a tight fit.
6. Insert the tubing connector, at the end of the tubing, into the tubing adapter input on the pump.

Pumping Tips ?

The most important part of successful pumping is the let-down reflex. Warm compresses and light massaging of the breasts can help. Thinking of or looking at your baby may also aid this reflex.

Some mothers can achieve multiple let-downs per session. You can try to trigger a second or third let-down by pressing the Let-Down button.

How Long To Pump

Double pumping saves time. Breastmilk production is based on supply and demand; regular expression stimulates and maintains milk supply. For breastfeeding problems, consult a physician, lactation consultant, or La Leche League Leader.

Using The Lansinoh® Affinity® Breast Pump

For Double Pumping

1. Ensure both tubes are attached to the tubing connector and insert into the pump base.
2. Hold the Breastmilk Expression Set to your breasts, centering your nipples.
3. Press the On/Off button to begin pumping. The pump starts in the Let-Down Phase (Phase I). After two minutes, it automatically switches to the Expression Phase (Phase II).
4. To bypass or shorten Phase I, press the Let-Down button to move directly to Phase II. The Expression Icon will appear on the display.

Using the Affinity® Breast Pump (Expression Phase)

1. During the Expression Phase, you can independently adjust cycle and suction settings using the (+) and (-) buttons next to the respective icons.
2. For maximum milk flow, set the cycle to L6 (Figure 1). This slows the rhythm but lengthens the cycle, allowing for more effective milk draw.
3. After setting the cycle to L6, increase suction to L8 (Figure 2) or your comfort level. This combination provides optimal milk expression.
4. When finished, turn off the pump using the On/Off button. Ensure there is no suction on the nipple(s) before removing the breast flanges. Break suction by inserting a finger between the flange and breast if needed.

Note: The LCD display light turns off after 20 seconds of inactivity to save power. The pump will automatically shut off after 30 minutes of unattended use.

For Single Pumping:

Remove one tube and close the tubing connector. Ensure the plug is placed securely into the pipe outlet.

Power Options

The pump can be operated using the AC adapter or 6 AA batteries (not included).

AC Adapter (included)

Connect the AC adapter to the power receptacle on the left side of the pump and plug it into an electrical outlet. Electrical safety is ensured only when using the supplied AC adapter.

6 AA Alkaline Or Rechargeable Batteries (not included)

Open the battery cover underneath the pump and insert 6 AA batteries, observing correct polarity (+/-). Close the compartment. Remove batteries if the pump will not be used for an extended period. Dispose of batteries according to environmental regulations. Replace batteries as a set. Do not mix old/new or different battery types (alkaline, carbon-zinc, nickel-cadmium).

Note: If batteries are installed and the AC adapter is in use, the pump will run on AC power. The AC adapter is universal (100-240V AC, 50-60Hz).

Breastmilk Storage Guidelines

Consult your healthcare provider or a lactation consultant for specific storage instructions. When freezing breastmilk, fill containers no more than 3/4 full to allow for expansion. Date containers with the expression date.

Note: Do not store breastmilk in the freezer door, as it is the warmest part. Always use the oldest breastmilk first.

Optional cooler packs can store up to six 5 oz bottles for up to 10 hours at room temperature.

Thawing

Thaw frozen milk in the refrigerator or under cool running water. Thawed milk can be kept in the refrigerator for up to 24 hours. Do not refreeze thawed milk. Gently shake thawed milk before feeding. Breastmilk composition can vary. Do not microwave human milk, as it alters composition and can create hot spots. Do not thaw breastmilk in hot or boiling water.

Troubleshooting / Technical Data

Troubleshooting

• Interruption of Electrical Service: Unplug and replug the AC adapter cord.
• Discomfort While Pumping: Consider a different size flange. Contact Lansinoh for assistance.
• Decreased Suction: Ensure the pump is set to the highest cycle (L6) and suction (L8) for optimal expression. Check tubing, assembly, and white valve for damage or incorrect placement. For single pumping, ensure the tubing adapter is closed. For double pumping, ensure both flanges are attached.
• Increased Suction (Single Pumping): Check the tubing plug for cleanliness and clear airway.
• Breastmilk Buildup: Reduce suction to allow milk to drain, then gradually increase.

Technical Data

• Power Requirements: AC Adapter (included, 100-240V AC, 50-60Hz) or 6 AA batteries (1.5V alkaline or 1.2V rechargeable).
• Regulatory Compliance: Type BF Applied Part.

Power Adapter Care: Do not wrap the cord around the plug. Do not unplug by pulling the cord. Do not use a damaged adapter.

Warranty

Lansinoh® provides a limited one-year warranty on the pump mechanism and a 90-day warranty on other components from the date of purchase. This warranty is non-transferable. Lansinoh® makes no express warranties beyond those stated. Implied warranties are limited to 90 days. Lansinoh® will repair or replace defective products at its discretion. The purchaser is responsible for return shipping costs. This warranty does not cover misuse, abuse, or alteration. Use only Lansinoh® replacement parts. Lansinoh® is not liable for incidental or consequential damages.

To make a warranty claim, return the product prepaid with proof of purchase and a brief problem description, along with a Return Authorization (RA) number obtained by calling 800-292-4794 or emailing customerservice@lansinoh.com.

Declaration for Electromagnetic Compatibility (EMC)

This device requires special EMC precautions and must be installed and used according to the provided EMC information.

List of cables and accessories:

• Tubing
• Breastmilk Expression Set (Flange, Flange Body, Diaphragm, Diaphragm Cap, White Valve, Bottles)
• Breastmilk Storage Bottle Ring and Sealing Disk
• AC Adapter/Power Cord
• Velcro Strap for Tubing

Use only manufacturer-recommended cables and accessories. Changes may affect performance.

FCC STATEMENT:

This device complies with Part 15 of the FCC rules. Operation is subject to two conditions: (1) no harmful interference, and (2) acceptance of any received interference.

Wireless statement:

Maintain a safe distance from portable and mobile RF communications equipment.

Stacking:

Avoid stacking the DEBP with other equipment. If necessary, observe normal operation.

Guidance and manufacturer's declaration - electromagnetic emissions:

The DEBP uses RF energy internally and has very low emissions, unlikely to cause interference. It is suitable for domestic and commercial environments connected to a public low-voltage power supply.

Recommended separation distance:

Maintain a minimum distance from portable and mobile RF communications equipment based on the transmitter's maximum output power and frequency, as per the provided guidelines.

Guidance and manufacturer's declaration - electromagnetic immunity:

The DEBP is intended for use in controlled electromagnetic environments. It is designed to withstand electrostatic discharge, electrical fast transients, surges, voltage fluctuations, and power frequency magnetic fields typical of commercial or hospital environments. For continued operation during power interruptions, use an uninterruptible power supply or battery.

Guidance and manufacturer's declaration - electromagnetic emissions (continued):

Radiated RF: Maintain recommended separation distance from RF sources. Field strengths from fixed transmitters should be controlled. Interference may occur near equipment marked with a specific symbol.

Conducted RF: Field strengths should be less than 3 V/m over the specified frequency range.

Contact & Legal Information

This product is a personal care item and cannot be returned once opened. If you experience any problems, please call the toll-free customer service line at 800-292-4794. A representative will assist you.

Distributed by Lansinoh Laboratories, Inc. 333 North Fairfax Street, Alexandria, VA 22314 USA. Lansinoh.com. Lansinoh® is a registered trademark of Lansinoh Laboratories, Inc. ©2011 Lansinoh Laboratories, Inc. All rights reserved.