Installation Guide for Lighting Direct models including: 2474-84 Chatham Square 3 Light, 2474-84, Chatham Square 3 Light, Square 3 Light, Light

INATALLATION INSTRUCTIONS

ff4bb1 giant

INATALLATION INSTRUCTIONS

PDF preview unavailable. Download the PDF instead.

frmjgdtsvluv
INSTALLATION INSTRUCTIONS

Item#2474-84 (New. 8/13/2021) READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

MOUNTING THE FIXTURE (Fig.1)

Fig. 1

1. Shut off power at the fuse box or circuit breaker box Set#A-021-120SQ

and remove the old fixture including the mounting -Mounting plate

hardware.

-Ground screw

- Mounting screw*2

2. Carefully unpack your new fixture and lay out all the

parts in a clear area. Take care not to misplace any

AB

small parts necessary for installation.

D C

3. Loosen screws (D) to remove mounting plate (A)

from fixture body (C). 4. Attach the mounting plate (A) to the junction boxnot

included using the mounting screws (B) (SIZE:

#8-32N, L0.5"). The side of the mounting plate

marked "GND"must face out.

CONNECTING THE WIRES (Fig. 2)

5. Connect the electrical wires as shown in Fig. 2,

E

making sure that all wire connectors are secured. If

your junction box has a ground wire (green or bare

copper), connect the fixture's ground wire to it.

F

Otherwise, connect the fixture's ground wire directly

G

to the mounting plate (A) using the green screw

provided. After the wires are connected, tuck them

H

carefully inside the junction box.

FINISHING THE INSTALLATION (Fig.1) 6. Place fixture body (C) over mounting plate (A) and Fig. 2

secure with screws (D). 7. Slide glass shade (E) followed by metal ring (F) over
the socket and secure using tool (G).

FIXTURE WIRES Black or Smooth

FIXTURE WIRES White or Ribbed

FIXTURE WIRES Green or Bare Copper (Ground)

8. Install (4) four medium base bulbs (H) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification--DO NOT

HOUSE WIRES Black (Hot)

HOUSE WIRES White (Neutral)

HOUSE WIRES Green (Ground)

EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)

Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Your installation is now complete. Return power and test the fixture.

LA-3472E


Acrobat PDFMaker 24 for Word (C) 2018 Retailer Web Services LLC, all rights reserved.