KRAUSE Corda Alu Ladder End Cap (Mushroom Plug) Replacement Guide
Introduction
This guide provides instructions for replacing the end caps, also known as mushroom plugs, on KRAUSE Corda Alu household ladders. The specific part number is 560683. A total of 6 end caps are required for a complete replacement.
Parts Required
- KRAUSE End Caps (Mushroom Plugs) - Part Number: 560683
- Quantity: 6
Replacement Procedure
Follow these steps to replace the end caps:
Step 1: Preparation
Ensure the ladder is stable and on a level surface. Identify the end caps that require replacement.
Visual Description: The first step shows a close-up view of the ladder's leg frame. A specific point where the end cap attaches is indicated by a [highlighted area].
Step 2: Insertion
Remove the old end cap if present. Insert the new KRAUSE end cap into the designated opening on the ladder frame.
Visual Description: The second step illustrates inserting a new black end cap into the ladder's leg from below, guided by an upward arrow (⬆️).
Step 3: Confirmation
Ensure the new end cap is securely and properly fitted.
Visual Description: The third step shows the end cap fully inserted and secure, confirmed with a green checkmark (✔️).
Product Information
Manufacturer: KRAUSE-Werk
Address: D-36304 Alsfeld, Germany
Website: www.krause-systems.com
Printed in Germany.
Subject to technical changes, errors, and misprints.
© 2017 Copyright by KRAUSE-Werk.
Quality Assurance: QUALITY [since 1900]