Product Overview
This document provides instructions for the assembly and operation of the Solo by AL-KO petrol lawnmower. Please read all instructions carefully before use.
Diagram: A line drawing shows a petrol lawnmower with a distinct engine unit, four wheels, and an adjustable handlebar. The brand logo 'solo by AL-KO' is visible at the top right.
Compliance: The CE mark indicates conformity with European standards.
Part Identification
Diagram: The lawnmower is illustrated with numbered components:
- 1: Front wheel assembly
- 2: Handle adjustment mechanism (for height/angle)
- 3: Main handlebar
- 4: Engine housing and deck
- 5-7: Components of the grass collector (bag/chute)
Cutting Height Adjustment
Diagram: Illustrates the range of cutting heights. A scale shows adjustments from 3.0 cm to 8.0 cm. Different levels of grass are depicted, numbered 1 through 7, corresponding to the cutting height settings.
Action: An arrow indicates adjustment of the wheel height (labeled 1 and 2).
Assembly Instructions
Follow these steps to assemble the lawnmower:
Step 2: Handle Assembly
Diagram: Shows the lower part of the handlebar being attached to the lawnmower deck. It indicates the use of 4x M6x35 screws and 4x M6 nuts to secure the main handle frame.
Step 2a: Cable Routing
Diagram: Illustrates how control cables are routed and attached to the handlebar structure. A small lever or clip mechanism is shown.
Step 2b: Parking Brake Engagement
Diagram: Shows the handlebar connected to the mower deck. A 'P' symbol is visible, suggesting a parking brake or safety mechanism engagement.
Step 3: Control Cable Attachment
Diagram: Details the attachment of control cables to the handlebar. It specifies hardware: 1x M6x30 screw, 1x Ø6.4 washer, and 1x M6 nut, along with a clamp or bracket.
Step 4: Cable Management
Diagram: Shows a close-up of cable management. Two steps (labeled 1 and 2) illustrate securing cables using clips or ties to the handlebar, ensuring they are tidy and do not interfere with operation.
- Step 1: Position the cable.
- Step 2: Secure with a clip.
- Step 3: Final check.
Operation Instructions
Diagram (Step 5): Shows a warning symbol ⚠️ indicating caution. It illustrates the engagement of the grass clipping discharge chute or mulching plug.
Diagram (Step 6): A general view of the fully assembled lawnmower, ready for use.
Starting and Stopping
Diagram (Step 7): Illustrates the "GO" control. A lever on the handlebar is shown in the engaged position, with an arrow indicating forward motion. The text "GO" is prominent.
Diagram (Step 7a): Illustrates the "STOP" control. The same lever is shown in the disengaged position, with an arrow indicating the mower stopping. The text "STOP" is prominent.
To operate the lawnmower, engage the "GO" lever. Release the lever to stop the engine and blade rotation.