Instruction Manual for Centrometal models including: TU-DT-2024-ENG Thermostat, TU-DT-2024-ENG, Thermostat
File Info : application/pdf, 2 Pages, 138.14KB
DocumentDocumentHEATING TECHNIQUE Centrometal d.o.o. - Glavna 12, 40306 Macinec, Croatia, tel: +385 40 372 600, fax: +385 40 372 611 ENG Technical instructions for installation and usage HEATING TECHNIQUE Centrometal d.o.o. - Glavna 12, 40306 Macinec, Croatia, tel: +385 40 372 600, fax: +385 40 372 611 ENG Technical instructions for installation and usage DIFFERENTIAL THERMOSTAT DIFFERENTIAL THERMOSTAT TU-DT-2024-ENG TU-DT-2024-ENG 80 100 80 100 The differential thermostat manufactured by company Centrometal d.o.o. is intended for installation in solar systems or central heating systems where it is needed to switch on (switch off) the pump according the set (adjusted) temperature difference. The differential thermostat has compact dimensions, it is placed in the plastic housing, wall hanged. It is mounted on the wall with 4 screws which is not delivered together with the differential thermostat. Together with the differential thermostat 2 sensors type KTY are delivered which are very easy toconnect with the differential thermostat.The sensors are fastened on the tube by the help of a plastic cover and bindings. The setting of the difference switch on/off the circulation pump is done by help of a trimmer which is placed in the thermostat housing and is set in the factory on the difference of 10°C. Differential thermostat characteristics - Compact housing for easy mounting on the wall. - The selection of the differential thermostat operation: automatic (auto) or manual (rucno). - Display of the operation through a led diode. - Possibility to set the thermostat switch on/off interval: 0-20°C. - It is delivered with all necessary sensors. 105 - I (AUTO) - the thermostat turns the pump on/off according to the set difference. - O - thermostat off. - II (MANUAL/RUCNO) - manual start of the pump. TABLE OF RESISTANCE OF THE KTY SENSORS Connection sheme: LABEL ON THE ORDINALY TERMINAL Temp. Resis. Temp. Resis. C W C W -20 1390 40 2210 -15 1450 45 2290 NL NL circulation power suplly pump 230 V -10 1510 50 2370 -5 1570 55 2450 0 1630 60 2540 5 1700 65 2630 10 1760 70 2720 15 1830 75 2810 20 1900 80 2900 25 1980 85 3000 30 2050 90 3090 35 2130 9 3190 ORDINALY TERMINAL TRIMMER Centrometal d.o.o. - 40306 MACINEC - Glavna 12 http://www.centrometal.hr / e-mail: servis@centrometal.hr tel. central: +385(0)40/372-600 Technical office: 040/372-620 / fax. teh. ureda: 040/372-621 colector sensor tank sensor colector sensor tank sensor The differential thermostat manufactured by company Centrometal d.o.o. is intended for installation in solar systems or central heating systems where it is needed to switch on (switch off) the pump according the set (adjusted) temperature difference. The differential thermostat has compact dimensions, it is placed in the plastic housing, wall hanged. It is mounted on the wall with 4 screws which is not delivered together with the differential thermostat. Together with the differential thermostat 2 sensors type KTY are delivered which are very easy toconnect with the differential thermostat.The sensors are fastened on the tube by the help of a plastic cover and bindings. The setting of the difference switch on/off the circulation pump is done by help of a trimmer which is placed in the thermostat housing and is set in the factory on the difference of 10°C. Differential thermostat characteristics - Compact housing for easy mounting on the wall. - The selection of the differential thermostat operation: automatic (auto) or manual (rucno). - Display of the operation through a led diode. - Possibility to set the thermostat switch on/off interval: 0-20°C. - It is delivered with all necessary sensors. 105 - I (AUTO) - the thermostat turns the pump on/off according to the set difference. - O - thermostat off. - II (MANUAL/RUCNO) - manual start of the pump. TABLE OF RESISTANCE OF THE KTY SENSORS Connection sheme: LABEL ON THE ORDINALY TERMINAL Temp. Resis. Temp. Resis. C W C W -20 1390 40 2210 -15 1450 45 2290 NL NL circulation power suplly pump 230 V -10 1510 50 2370 -5 1570 55 2450 0 1630 60 2540 5 1700 65 2630 10 1760 70 2720 15 1830 75 2810 20 1900 80 2900 25 1980 85 3000 30 2050 90 3090 35 2130 9 3190 ORDINALY TERMINAL TRIMMER Centrometal d.o.o. - 40306 MACINEC - Glavna 12 http://www.centrometal.hr / e-mail: servis@centrometal.hr tel. central: +385(0)40/372-600 Technical office: 040/372-620 / fax. teh. ureda: 040/372-621