User Manual for Saramonic models including: SR-BH40, SRBH40, 2ARN3-SR-BH40, 2ARN3SRBH40, SR-BH40 True Wireless Stereo Earbuds, True Wireless Stereo Earbuds, Earbuds
Shenzhen Jiayz photo industrial.,Ltd SR-BH40 True Wireless Stereo Earbuds 2ARN3-SR-BH40 2ARN3SRBH40 sr bh40
File Info : application/pdf, 10 Pages, 1.43MB
DocumentDocument400-613-1096
www.saramonic.com
info@saramonic.com
SR-BH40
True Wireless Stereo Earbuds
This manual is for reference only. Please refer to the actual product for the specific functions and appearance of the product. Please read it carefully before using this product and keep it in a safe place for future reference.
Thank you for purchasing this product! Please read carefully and strictly follow the instructions and precautions before using this product, and keep it in a safe place for future reference. Tips: When you receive this product, please tear off the insulating film at the charging contacts of the earbuds.
Product overview
How to wear
Correctly insert the earbuds into your ears according to the L/R mark (L for the left while R for the right).
Indicator button Battery level indicator Status indicator/built-in microphone
Earbuds
Bluetooth Name Saramonic BH40
Bluetooth Version 5.2
Battery Capacity 60mAh
Wireless Range Approx. 10m
Battery Life
Approx. 10 hours (50% volume)
Weight
4g×2
Dust cover of charging port Versatile touch panel Charging contacts
Charging Case Capacity Battery Life Charging Time Input Voltage Weight
320mAh Approx. 15 hours Approx. 1.5 hours 5V 300mA 42g
Keep the blue area close to your ears
Power on/off
1. Power on With charging case: open the case and take out the earbuds. The earbuds will automatically turn on with voice prompts "Power on". Without charging case: when earbuds are off, tap and hold the touch panel for about 2.5 seconds, the earbuds will turn on with voice prompts "Power On".
2. Power off With charging case: put the earbuds back into the charging casethe status indicators will be solid red. Without charging case: when earbuds are on, tap and hold the touch panel for about 8 seconds, the earbuds will turn off with voice prompts "Power off". Note: When the earbuds are not connected to any device, it will enter paring mode automatically after power on with voice prompts "Pairing". If connect successfully, there will be voice prompts "Connected"
Touch control
Play/Pause Double-tap the touch panel of L/R earbud
Next Tap the touch panel of right earbud 3 times
Previous Tap the touch panel of left earbud 3 times
Volume up Tap and hold the touch panel of right earbud for 1.5s until voice prompts "du"
Volume down Tap and hold the touch panel of left earbud 1.5s until voice prompts "du"
Answer/hang up a call Tap the touch panel of L/R earbud
Reject a call Tap and hold the touch panel of L/R earbud for 2s
Activate voice assistant When connected, tap the touch panel of left earbud 4 times
Enter/exit game mode Tap the touch panel of right earbud 4 times Enter: voice prompts "Game Mode" Exit: voice prompts "Bluetooth Mode"
Charging case
75%-100% 50%-75% 25%-50% 0%-25%
To display battery level: Put the earbuds into the charging case and press the indicator button. The indicator will display the current battery level of the charging case.
Charging status: Connect Type-C charging cable to the charging port, the indicator will show the current battery level. When the charging case is fully charged, All four indicators will light up. Remove the charging cable, and all the indicators will be off.
Factory reset
Reset the earbuds in the following situations: 1. The earbuds has been paired with other devices, and Saramonic BH40 cannot be found on your device. 2. Only one earbud work. Steps: Turn on the earbuds and tap the touch panel 3 times, then tap and hold it for 5s. The status indicator will flash red and blue alternately. Put them back into the charging case and then take out. Note: The above steps need to be completed within 8 seconds. After earbuds successfully reset, please always maintain a distance of within 10 cm between the two earbuds.
FAQ
Q: Only one earbud work? A: Put the earbuds into charging case and take out, if still only one earbud works, restore to factory setting.
Q: Failed to connect devices with earbuds? A: Delete the pairing record on the devices and reconnect with earbuds.
Q: No sound in the phone call? A: Select "Saramonic BH60" as your audio input source in your device settings.
Q: Audio delay in video or gameplay? A: Environment, WiFi, encode/decode speed of other devices and software are all possible factors to cause effect to the audio data transmission speed of the earbuds. For example, most game software set real-time audio transmission as a priority, which is possible to affect the speed.
Q: Why is there stuck / breakpoint? A: If there are many WiFi routers, 4G signals, high-power electrical appliance and etc when using, it may be stuck or breakpoint. It can be solved by changing the environment or reconnecting.
Safety instruction
1. Please use the original or with safety certification wire harness for charging. 2. When using earbuds, please adjust the volume appropriately to avoid damaging the hearing. 3. Please use the product correctly to avoid falling or heavy extrusion. 4. Children should be accompanied by adults to avoid eating by mistake. 5. Keep away from extreme environments such as high temperatures or humidity. 6. Please do not disassemble this product.
Hazardous substances and their contents in the item
Part neme
Main battery Battery Eartips
Accessories Charging
cable
This form is made by SJ / T 11364 regulation O: means that hazardous substance content in the homogeneus
materials of this part are within the limits of GB / T 26572 regulation X: means that hazardous substance content in, at least one certain
homogeneous material of this part is beyond the limits of GB / T 26572 regulation.
Service life As described in this manual, under normal use conditions, the environmental protection service life of this product is 10 years. During this period, the product will not leak any dangerous substances. This product can be recycled and must be disposed according to local regulations.
After-sales and supports
According to the relevant laws and regulations of consumer electronic products and the actual situation of the industry, the following after-sales service regulations are formulated to provide consumers with satisfactory after-sales services:
1. Warranty certificate mainly includes: warranty card and sales certificate.
2. After-sales service scope: · During the warranty period of the product, the company will be responsible for
providing free maintenance for any failure caused by the quality problem of the product itself under normal use without disassembly and repair; · For products beyond the warranty period, the warranty certificate shall be issued and the maintenance fee shall be paid. If any spare parts are needed for repair, cost for the spare parts would be born by the purchaser; please avoid repair and replace when the product is not tested by Saramonic after-sales department; · Once the warranty certificate is altered, the warranty will become invalid immediately; · The warranty certificate of the product shall be properly kept by the consumer and shall not be supplemented if lost.
3. Warranty Period: · Within 24 months after purchasing this product, there are quality problems in normal
use (non-human damage) without disassembly and repair; 2-year warranty (including all accessories) from the date of issuing the sales certificate; · Consumers who have quality problems in normal use (non-human damage) within7 days from the date of purchase, without repair, can enjoy the replacement service; · The replacement service is limited to products of the same model and color.
4. Regulations on invalidation of the warranty during the warranty period 4.1 In the following cases, the warranty is invalid, but the maintenance service is provided, the labor fee and parts fee are charged: any damage to accessories caused by improper use, maintenance and storage of consumers; damage caused by force majeure, such as natural disasters.
4.2 In the following cases, the company will refuse to provide maintenance services or provide charged maintenance services: It is unable to provide the product warranty card or the content recorded in the warranty card is inconsistent with the product, or the content is altered or illegible; earbuds that have been removed by any unauthorized person of Shenzhen Jiayz Photo Industrial., Ltd (such as changing wires, removing voice coils, etc.); there is no sales voucher or the content of the sales voucher is inconsistent with the product.
5. We will not provide warranty service in the following cases After our inquiry, if we find that your repair products are not our products, we will refuse to provide warranty service or double the maintenance fee. Please attach the warranty certificate when you send the earbuds to our company for repair. If you don't have any certificate, our company will handle it as parallel imports
Packing list
1. Changing case 2. L & R earbuds 3. Type-C charging cable 4. Carrying strap 5. Manual 6. Warranty card 7. Commodity certificate
L/R/
/
Saramonic BH40 5.2 60mAh 10 1050% 4g×2
320mAh 15 1.5 5V 300mA 42g
1. "Power on" 2.5"Power on"
2. 8"Power off"
"Pairing" "Connected"
/ /2
+ 1.5s"Du"
1.5s"Du"
/ 1
2
4
4 "Game play Mode" 4 "Bluetooth Mode "
75%-100% 50%-75% 25%-50% 0%-25%
Type-C
1. 2. 35 8 TWS10CM
1.
2.
3. /
4. /
5. / Wi-Fi4G
1. 2. 3. 4. 5. 6.
1. 3. Type-C 5. 7.
2. / 4. 6.
:
1. :
2. : ·
; · ;
; ; · ·
3. : · 2
; · 7
; ·
4. : · :1
;2 · :1
2 3
5. :
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without
restriction.
FCC ID2ARN3-SR-BH40
43#)
43#)
7
1
NN1$4
NN
7
Adobe PDF library 15.00