Instructions for NEXSENS models including: X2 Enviroment Data Logger Grounding Kit

X2 GROUNDING KIT

X2 Ground Kit Instructions

X2 Data Logger Grounding - NexSens

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 314.76KB

Document Document

X2 GROUNDING KIT
INSTRUCTIONS

1 Place the large included lock-washer over the
larger diameter end of the threaded adapter.
a. Tighten the adapter into any of the available (3) threaded holes on the X2 using a 1/2" socket or hex driver.

3

Use a 5/32" allen wrench to tighten down the ring terminal cable to the grounding lug.

Figure 1: Insert the adapter into one of the threaded holes on the X2.
2 Postion the grounding lug, followed by the small
lock-washer and nut on top of the threaded adapter. a. Tighten down the nut using a 7/16" socket or
hex driver.

Figure 3: Connection between the grounding lug and terminal cable.

4

Follw the PM2 quick start card to mount the X2 to the buried 2" NPT pipe or other mount.

5

Slip the ring terminal of the cable between the washer and lock-washer on one side of the PM2

U-bolt.

a. Tighten securely with a 1/2" socket or hex driver.

Figure 2: Tighten down the grounding lug.
937-426-2703 www.nexsens.com

Figure 4: Completed X2 grounding kit assembly.
2091 Exchange Court Fairborn, Ohio 45324