User Manual for Powertrain models including: FLYWHEEL Exercise Bike Flywheel, FLYWHEEL, Exercise Bike Flywheel, Exercise Bike, Bike Flywheel, Flywheel
Installation Manual (PDF) VIGBODY VIGBODY,Indoor,Cycling,Bike,Stationary,,Exercise,Bike,for,Home,Gym,Cardio,with,Comfortable,Seat,Cushion,,Ipad,Holder,&,LCD,Monitor,,Silent,Belt,Drive,(Upgrade,Version),B0B2P8KTJJ,B088DQV9ZJ,B09CPSSTZL
User ' s Manual FLYWHEEL:20 LB Contact us via Amazon:Login your amazon account> choose"Your orders">find the order ID>click "Contact seller" Contact us via Email:support07@520gym.com SAFETY INFORMATION WARNING TO REDUCE THE RISK OF SERIOUS INJURY, READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE USING THE EQUIPMENT. IMPORTANT: THIS UNIT IS INTENDED FOR HOME USE ONLY 1. It is important to read this entire manual before assembling and using the equipment. Safe and efficient use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 2. Before starting any exercise program you should consult your doctor to determine if you have any physical or health conditions that could create a risk to your health and safety, or prevent you from using the equipment properly. Your doctor's advice is essential if you are taking medication that affects your heart rate, blood pressure or cholesterol level. 3. Be aware of your body's signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: Pain, tightness in your chest, irregular heartbeat, extreme shortness of breath, feeling light headed, dizzy or nauseous. If you do experience any of these conditions you should consult your doctor before continuing with your exercise program. 4. Keep children and pets away from the equipment. The equipment is designed for adult use only. 5. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. For safety, the equipment should have at least 0.6 metre of free space all around it. 6. Before using the equipment, check the nuts and bolts are securely tightened. 7. The safety level of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear. 8. Always use the equipment as indicated. If you find any defective components whilst assembling or checking the equipment, or if you hear any unusual noise coming from the equipment during use, stop. Do not use the equipment until the problem has been rectified. 9. Wear suitable clothing whilst using the equipment. Avoid wearing loose clothing which may get caught in the equipment or that may restrict or prevent movement. 10. Maximum weight of user 330LB. 11. This equipment is not suitable for high precision applications. 12. This equipment brake system is not relevant. 13. Care must be taken when lifting or moving the equipment so as not to injure your back. Always use proper lifting techniques and/or use assistance. 1 EXPLODED DRAWING 11 9 25 22 27 10 24 20 6 21 5 8 28 23 7 14 26 19 15 1 4 13 18 17 14 12 18 2 17 16 3 16 2 PARTS LIST NO. NAME 1 Main Body 2 Front Stabilize 3 Rear Stabilizer 4 Saddle Post 5 Handle Post 6 Handle Frame SIZE Assembly Assembly Assembly Assembly Assembly Assembly QTY. NO. 1 15 1 16 1 17 1 18 1 19 1 20 NAME Adjusting nut Carriage Bolts Flat washer Cover nut Flat washer Button head bolt 7 Saddle Adjustment Frame Assembly 1 21 8 Saddle Spring loaded 1 22 9 Monitor Square 1 23 Spring washer Pulse Wire Signal Wire 10 Monitor Holder fit for Ø25tube 1 24 Self tapping screw 11 Mobile phone holder fit for Ø25tube 1 25 Open wrench 12 Right pedal R 1 26 Cages 13 Left pedal L 1 27 Inner hexagon spanner 14 Adjusting knob M16 2 28 screw SIZE QTY. M10 1 M8X53 4 Ø8.5 4 M8 4 Ø10.5 1 M8X16 4 Ø8.5 4 1 1 M4X20 1 13-15 1 1 6mm 1 M4X10 2 3 ASSEMBLY INSTRUCTIONS STEP 1 16# 4psc 17# 4psc 18# 4psc 25# Foot adjusters 1 18 17 18 2 17 16 3 16 The Front Stabilize (2) is fixed on the Main Body (1) with Carriage Bolts (16), Flat washers (17) and cover nuts (18), and fixed with open wrench (25). Note: the move wheels of the Front Stabilize(2) are forward,as shown. Similarly, the Rear Stabilizer (3) is fixed on the Main Body (1) with carriage Bolts (16), flat washers (17) and cover nuts (18), and fixed with open wrench (25). Attention: The foot adjusters on the rear stabilizer (3) can adjust the machine to the ground smoothly.The moving wheels on both sides of The Front Stabilize (2) can move the machine in a short distance. 4 STEP 2 28# 2psc 25# 27# 28 14 26 1 13 25 14 25 12 Install the right pedal (12) with R mark on The Main Body (1) and fix it with an open wrench (25). Note: tighten it clockwise. Similarly, Install the left pedal (13) with L mark on the Main Body (1) and fixed with an open wrench (25). Note: tighten counterclockwise. The adjusting knobs (14) is installed in front and back of the Main Body(1) respectively. Note that no tightening is needed at this time. Place the bottle cage (26) on the frame (1), and use the tool (27) and screws (28) to place it on the frame. 5 STEP 3 5 14 1 4 14 The Saddle Post (4) is inserted into the Main Body (1), and the Adjusting knob (14) is pulled out so that the Adjusting knob (14) is automatically inserted into the corresponding hole of the Saddle Post (4). Similariy, the Handle Post (5) is inserted into the Main Body (1), and the Adjusting knob (14) is pulled out so that the Adjusting knob (14) is automatically inserted into the corresponding hole of the Handle Post (5). 6 Note: Pull out the Adjusting knob (14) can adjust the height of the Saddle Post (4) or the Handle Post(5). After adjusting, it is necessary to tighten the Adjusting knobs (14). STEP 4 7 4 19 15 The seat adjustment frame (7) is installed on the seat post (4), and is fixed with a flat washer (19) and an adjusting nut (15). Note: Loosen the adjusting nut (15) to adjust the position of the seat adjusting frame (7) back and forth to the corresponding position. The adjusting nut (15) needs to be tightened before use. 7 STEP 5 20 21 20# 4psc 21# 4psc 27# 6 5 The handle frame (6) is fixed on the handle post (5) with a spring washer (21) and a round head bolt (20), and is tightened with an Allen key (27). 8 STEP 6 9 22 10 6 23 The electronic meter (9) is installed on the electronic meter mounting bracket (10) on the armrest (6). Connect the sensing wire (22) with the sensing wire (23), the interfaces are all corresponding. 9 STEP 7 11 6 Install the Mobile phone holder (11) on the Handle Frame (6). CAUTION: before using, please reconfirm that each part is tight and firm, and the machine is stable with the ground. 10 COMPUTER FUNCTION A, BATTERY INSTALLATION Load two 1.5V,AAA battery in the battery box on the back (after each battery replacement, all values will be "0") B, FUNCTIONAL DESCRIPTION 1, automatic scanning (SCAN): open the screen or press the button to enter the SCAN state, all the functions of the TIME-SPD-DIST-CAL-ODO-PUL will be automatically displayed on the main screen. 2, the movement time (TIME): cumulative calculation of movement time from 00:00-99:59, the user can press the button to select the time value display state. 3, the movement distance (DIST): cumulative calculation movement from the 0.0-999.9, the user can press the button to select the value of the distance display. 4, calories (CAL): shows that the cumulative consumption of calories from 0.0-9999, the user can press the button to select the value of the state of the display value. Note: this data is only a rough description and cannot be used for medical treatment. 5, the speed of movement (SPEED): show the current speed of the athlete, the value of 0.0-999.9 M L / mile / hour. 6,Odometer (ODO): the distance between motion and time is 0-9999 M L . 11 7 , reset: hold down the button for about 3 seconds, all the values will be returned to the "0", thefunction can be reset. C, ATTENTION 1, such as electronic display is not normal, the need to re install the battery to try again, the battery,,+",can not be installed. 2, battery specification: 2 AAA 1.5V batteries 3, When the battery is scrapped, it must be removed from the electronic watch and handled safely. 12 TRAINING INSTRUCTIONS IN ADDITION TO THE USE OF THE EQUIPMENT CAN ENHANCE PHYSICAL FITNESS AND EXERCISE MUSCLES, BUT ALSO THROUGH A REASONABLE DIET TO PUWA ROLE IN WEIGHT LOSS. A, warm-up before training This phase of warm up exercise can enhance the body,s blood circulation, and the muscles to achieve good training, while reducing the risk of cramps or muscle damage during training. Before each training please do warm-up exercise in accordance with the following recommendations of the training, each stretch must be maintained for about 30 seconds, while doing this exercise not stretching intensity, prevent muscle damage, once the muscles are damaged, please stop the practice. B, training stage This stage is the formal training phase, after a long period of practice can improve the flexibility of the leg muscles. In the training process, the key is to do the training according to the training condition, and to choose the reasonable training intensity. Note: 1b keep the heart rate within the corresponding target range for at least 1 minutes of training, most people in the beginning of training lasted 15-20 minutes. 13WPS 文字