Instruction Manual for LAMP models including: MonoFlat LIN-X Hinge, MonoFlat, MonoFlat Hinge, LIN-X Hinge, Hinge
Sep 14, 2022 — Failure to observe the following precautions may result in injury and/or lead to damage to surrounding cabinets or fittings.
File Info : application/pdf, 5 Pages, 6.11MB
DocumentDocumentMonoFlat LIN-X 450 Instruction Manual PAT.P Thank you for purchasing this MonoFlat LIN-X hinge by SUGATSUNE. Before proceeding with the installation, please read this instruction manual carefully for the best possible result and ensure your safety. WARNING Failure to observe the following precautions may result in injury and/or lead to damage to surrounding cabinets or fittings. Choose suitable screws to ensure proper installation of the cabinet and door. Ensure that door size, weight and material correspond to the specifications in this manual. Do not disassemble or modify the system. Parts List 1 LIN-X Body.....2 pcs. Product Specification Door Width 400~500 mm Door Height 600~900 mm Door Thickness 15~24 mm Door Weight Max. 7 kg (per door) 2 Mounting Plate.....2 pcs. 3 Connecting Plate.....1 pc. L=540mm 4 Connecting Plate Cover 2 pcs. 5 Cup Cover.....2 pcs. 6 Countersunk Head Tapping 7 Binding & Tapping Screw Screw.....3.5x15.....6 pcs. 3.5x15.....8 pcs. 1 Overall (unit : mm) LIN-X450 · Picture shows the left hand door use. (Right hand door use is symmetrical.) (264) Gap:0.6 (67.2) (70) (43.9) (Travel Length: 432.3) (236.2) Overlay Distance Fig.1 · Side overlay as shown in Fig.1 is: 19mm for mounting plate 230-P4W-32T: 0mm (Standard) 14mm for mounting plate 230-P4W-32T: 5mm Side Board · An opening clearance of 2mm is required on both sides of the door. Position of LIN-X Body · Prepare the door as per Fig.2 and Fig.3 Fig.2 Cup hole diameter:35 Minimum depth:11mm Fig.3 Door Overlay Distance 12mm 40mm 245mm Door centerline 220mm 58mm Door height 600900mm Door height 600900mm 245mm 12mm 40mm 22.5mm Mounting Plate Position · Prepare the sideboard for mounting plate installation as per Fig.4 Fig.4 12mm 25mm 32mm 245mm Cabinet centerline Cabinet inside height : Minimum 560mm 32mm 245mm 2 Installation 1 Mounting Plate Installation: Mounting Plate LIN-X450 4 Connecting Plate Installation: Tighten Side Board Countersunk Head Tapping Screw 3.5×15 2 Cup Cover Installation: Cup Hole Door End Door Cup Cover Shaped Hinge Instal4la9t0ion Pitch Connecting Plate Insert CoInnsntaelclatitni4og9n0RPoidtch Connecting Nut Connecting Plate Ensure that the two are pointing toward the edge of the door. 3 LIN-X Body Installation: Door Base Plate Connecting Plate Cover 5 Door Installation: LIN-X Body Binding & Tapping Screw 3.5×15 Base Plate Side Mounting Plate Side Ensure that the two LIN-X bodies are parallel by measuring both the base and mounting plate distances. Ensure that the two LIN-X body is securely attached to the mounting plates. 3 Adjustments Adjustment Screw (Horizontal) Turn screw to adjust. LIN-X450 Adjustment Screw (Depth) Loosen screw, adjust the door and retighten screw. Adjustment Screw (Vertical) Loosen screw, adjust the door and retighten screw. Leveling Adjustment Screw Front Loosen both screws, adjust the door and retighten screws. Leveling Adjustment Screw Back 4 LIN-X450 Individual Parts for Tall / Heavy Doors Door Preparation Door Width 400~500 Product Specification Door Width 400~500 mm Door Height 600~2400 mm Door Thickness 15~24 mm Door Weight Max. 17 kg (per door) Hinge Distance A x (# of Hinge - 1) Hinge Distance A 40 12 Door Height Hinge Distance A x (# of Hinge - 1) Hinge Distance A 32 Min. Cabinet Inside Height = Connecting Bar + 20mm 35 Depth 11 Bore Distance 5 22.5 220 Door Thickness 12 58 15~24 37 Hinge in middle should be positioned at or equally distributed from center of door. Cabinet Preparation Hinge Distance A # of Hinges 540 2 pcs 490 3 pcs 245 4 pcs - 5 pcs - Length of Connecting Bar (mm) 840 1140 1440 1740 790 1090 - - 395 545 695 845 263.3 363.3 463.3 563.3 - 272.5 347.5 422.5 2040 - 663.3 497.5 SUGATSUNE KOGYO CO.,LTD. Phone: +81 (0)3 3866 2260 Fax: +81 (0)3 3866 4447 E-mail: export@sugatsune.co.jp Website: www.sugatsune-intl.com SUGATSUNE KOGYO (UK) LTD. Phone: +44 (0)1491 680737 Fax: +44 (0)1491 60762 E-mail: sales@sugatsune.co.uk Website: www.sugatsune.co.uk SUGATSUNE AMERICA, INC. Phone: +1 310 3296373 Fax: +1 310 3290819 E-mail: sales@sugatsune.com Website: www.sugatsune.com 5 SUGATSUNE SHANGHAI CO., LTD. Phone: +86 (0)21 3632 1858 Fax: +86 (0)21 3632 1868 E-mail: lamp@sugatsune.com.cn Website: www.sugatsune.com.cn 2009.05 PRINTED IN JAPAN 0445-1
Company Top | Architectural and Industrial Component Hardware | Japanese Manufacturer | LAMP | Sugatsune Global
Company Top | Architectural and Industrial Component Hardware | Japanese Manufacturer | LAMP | Sugatsune UK
Sugatsune America
世嘉智尼五金配件（上海）有限公司