NovaStar MCTRL700 LED Display Controller Specifications

Model: MCTRL700

Type: LED Display Controller

Change History

Document Version Release Date Description
V1.2.2 2025-06-11 Updated the resolution information and packing box dimensions.
V1.2.1 2021-08-02 Updated the packing information.
V1.2.0 2020-07-08
  • Added the hot backup verification function.
  • Added the 10-bit Gamma adjustment function.
  • Changed the minimum width of the Ethernet port loading capacity from 256 pixels to 128 pixels.
  • Changed the number of receiving cards loaded by each Ethernet port from 1024 to 512.
  • Fixed the problem that the backup between Ethernet ports 5 and 6 does not take effect.
  • Changed the Ethernet ports that support audio output from Ethernet ports 1-3 to Ethernet ports 1-2.
  • The default screen configuration information becomes 128x128 after factory reset.
  • Optimized the device cascading solution. Up to 20 devices can be cascaded.
  • Removed the RS232 ports. Devices can be cascaded via UART serial port.
  • Canceled the scaling function.
  • Canceled the virtual function.
V1.1.0 2019-05-15
  • Changed the document style.
  • Optimized the document content.

Introduction

The MCTRL700 is an LED display controller developed by Xi'an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). It supports 1x DVI input, 1x HDMI input, 1x audio input, and 6x Ethernet outputs. The maximum loading capacity of a single MCTRL700 is 1920x1200@60Hz.

The MCTRL700 communicates with PC via Type-B USB port. Multiple MCTRL700 units can be cascaded via UART port.

The MCTRL700 can be mainly used in the rental and fixed applications, such as concerts, live events, security monitoring centers, Olympic Games and various sports centers.

Certifications

FCC, CE, IC, PSE, NTRA, CB

If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible for the legal risks caused or NovaStar has the right to claim compensation.

Features

Appearance

Front Panel

Working with NovaLCT and calibration platform, the controller supports brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality.

Indicator Status Description
RUN (Green) Slow flashing (flashing once in 2s) No video input is available.
Normal flashing (flashing 4 times in 1s) The video input is available.
Fast flashing (flashing 30 times in 1s) The screen is displaying the startup image.
Breathing The Ethernet port redundancy has taken effect.
STA (Red) Always on The power supply is normal.
Off The power is not supplied, or the power supply is abnormal.

Rear Panel

AC Input: AC 100-240V~50/60Hz

Connector Type Connector Name Description
Input DVI IN
  • 1x SL-DVI input connector
  • Resolutions up to 1920x1200@60Hz
  • Custom resolutions supported
  • Maximum width: 3840 (3840x600@60Hz)
  • Maximum height: 3840 (500x3840@60Hz)
  • HDCP 1.4 compliant
  • Does NOT support interlaced signal input.
HDMI IN
  • 1x HDMI 1.3 input connector
  • Resolutions up to 1920x1200@60Hz
  • Custom resolutions supported
  • Maximum width: 3840 (3840x600@60Hz)
  • Maximum height: 3840 (500x3840@60Hz)
  • HDCP1.4 compliant
  • Does NOT support interlaced signal input.
AUDIO Audio input connector
Output 1-6
  • 6x RJ45 Gigabit Ethernet ports
  • Capacity per port up to 650,000 pixels
  • Redundancy between Ethernet ports supported
Output HDMI OUT 1x HDMI 1.3 output connector for cascading
Output DVI OUT 1x SL-DVI output connector for cascading
Control USB Type-B USB 2.0 port to connect to PC
Control UART IN/OUT Input and output ports to cascade devices. Up to 20 devices can be cascaded.
Power AC 100-240V~50/60Hz

Note: This product can only be placed horizontally. Do not mount vertically or upside-down.

Dimensions

Diagram Description: The diagram shows the front and side views of the MCTRL700 unit with dimensions labeled in millimeters. The front view shows a width of 482.0 mm, height of 44.4 mm, and depth of 268.5 mm. Mounting holes are indicated. The side view provides a depth of 268.5 mm, with specific measurements for the front panel (44.4 mm) and rear components. Tolerance is indicated as ±0.3 mm.

Diagram Description: The diagram shows the rear panel of the MCTRL700 with various connectors labeled. These include AC power input, DVI IN/OUT, HDMI IN/OUT, USB, and UART IN/OUT ports.

Tolerance: ±0.3 Unit: mm

Specifications

Electrical Specifications Input voltage: AC 100-240V~50/60Hz
Rated power consumption: 12 W
Operating Environment Temperature: -20°C to +60°C
Humidity: 10% RH to 90% RH, non-condensing
Physical Specifications Dimensions: 482.0 mm × 268.5 mm x 44.4 mm
Net weight: 2.6 kg (Note: It is the weight of a single device only.)

Packing Information

Category Details
Rackmount 1U
Packing box 585 mm x 465 mm x 353 mm (Note: Each packing box can hold up to 5 devices.)
Carrying case 565 mm x 88 mm x 328 mm
Accessory 1x power cord, 1x USB cable, 1x DVI cable

Video Source Features

Input Connector Features Bit Depth Sampling Format Max. Input Resolution
HDMI 1.3 8bit RGB 4:4:4 1920x1200@60Hz
Single-link DVI 8bit RGB 4:4:4 1920x1200@60Hz

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

PDF preview unavailable. Download the PDF instead.

MCTRL700-LED-Display-Controller-Specifications-V1.2.2 Microsoft Word 2016 Microsoft Word 2016

Related Documents

Preview NovaStar MCTRL700 LED Display Controller Specifications
Detailed specifications for the NovaStar MCTRL700 LED Display Controller, covering features, connectivity, appearance, dimensions, and certifications for professional LED video wall management.
Preview NovaStar MCTRL660 LED Display Controller Specifications
Detailed specifications for the NovaStar MCTRL660 LED Display Controller, including features, connectivity, dimensions, and operating environment.
Preview NovaStar MCTRL660 LED Display Controller Specifications
Detailed specifications for the NovaStar MCTRL660 LED Display Controller, covering features, connectivity, dimensions, operating environment, and compliance information.
Preview VC4 All-in-One Controller Specifications
This document provides detailed specifications for the NovaStar VC4 All-in-One Controller, a pure hardware device designed for professional LED screen control and video processing. It outlines features, input connectors, appearance, dimensions, applications, and overall technical specifications.
Preview NovaStar VX600 Pro All-in-One Controller Specifications
Detailed specifications for the NovaStar VX600 Pro, an all-in-one LED video controller, covering its features, input/output capabilities, performance, operational modes, and technical parameters.
Preview Novastar MCTRL700 LED Wall Controller - Product Overview
Detailed information on the Novastar MCTRL700 LED Wall Controller, a versatile device for fixed and mobile installations. Features include high resolution support, multiple inputs/outputs, and cascading capabilities.
Preview NovaPro UHD Jr All-in-One Controller: Specifications and Features
Detailed specifications, features, and technical overview of the NovaStar NovaPro UHD Jr All-in-One Controller for professional LED video processing and control, including input/output capabilities, dimensions, and application scenarios.
Preview NovaPro UHD Jr All-in-One Controller: Features, Specifications, and Applications
Discover the NovaPro UHD Jr, NovaStar's integrated video processing and sending card controller. This document details its extensive input/output capabilities, advanced functions like HDR and low latency, application scenarios, and technical specifications, designed for high-end rental and fine-pitch LED displays.