P65Warnings.ca.gov
User Manual for Sunco models including: EX_2H-RED, EX_2H-RED 2 Head LED Exit Sign, 2 Head LED Exit Sign, LED Exit Sign, Exit Sign, Sign
Installation Guides, Manuals, and Specs | Sunco – Sunco Lighting
Sunco Double Sided LED Emergency EXIT Sign, Two LED Lights, Backup Battery, US Standard Red Letter Emergency Exit Lighting, Commercial Grade, 120-277V, Fire Resistant (UL 94V-0) 2 Pack : Tools & Home Improvement
File Info : application/pdf, 10 Pages, 258.02KB
DocumentDocumentLighting made better. User Manual 2 Head LED Exit Sign SKU: EX_2H-RED support@sunco.com (844) 334-9938 AMERICAN COMPANY Whats in the Box? Exit Sign Components x1 Exit Sign Housing + Panel x2 Support Connectors x1 Canopy Mount x2 Wire Nuts 1 Le(tlittheerraellbye) light! x1 Trim Plate x2 Screws What You Need Get Your Gear Drill Pliers Screwdriver Ladder IMPORTANT: Prior to exit sign installation, install junction box in ceiling or wall. When re-lamping, use only lamps specified in the exit sign. Using other lamp types may result in transformer damage or unsafe conditions. The battery in this unit may not be fully charged upon unboxing. After electricity is hooked up to the unit, let the battery charge for at least 24 hours. It is then ready for normal operation. Unused wires must be capped with a wire nut. 2 Before You Start Safety Information · Turn off circuit breaker before installing this fixture. · Suitable for use in damp environments at temperatures ranging from 32°F to 104°F. Not for use where directly exposed to water. · Not compatible with photo controls. · Not compatible with occupancy sensors. · Not compatible with 3rd party sensors. · Not compatible with dimmers. · Not compatible with timing devices. · All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards. · Please review installation manual carefully before proceeding. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections. WARNING: Cancer & Reproductive Harm- www.P65Warnings.ca.gov This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1.) This device may not cause harmful interference. 2.) This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation. Dimensions 16.3" 3.6" 7.6" 3 Installation Guide ON OFF STEP 1 a. Turn off circuit breaker before installation. b. Open housing of exit sign using flathead screwdriver in slots on top. Alternate sides to unsnap entire faceplate. Pull off faceplate & set aside. c. Remove mounting components (wrapped in plastic for shipping) from the housing. Set aside. STEP 2 a. Unwrap canopy and mounting hardware from plastic packaging. b. Snap two support connectors in provided slots. These will connect canopy mount plate to top of housing. STEP 3 a. Pop out top knockout. There are two slots. Feed lead wires through hole. b. Secure wires with wire guide. 4 Installation Guide (Cont.) STEP 4 a. Align trim plate to screw holes on back of the canopy mount plate. Turn over. Secure trim plate with 2 provided screws. b. Feed lead wires (from face to back) through canopy mount plate & trim plate. Snap canopy mount plate onto exit sign housing. STEP 5 a. Connect exit sign lead wires to AC input leads in junction box (not included) & cap off unused wires with wire nuts. b. Feed excess wire into J-box. Secure canopy mount with exit sign using included screws. Connect battery to the PC board by plugging wire into socket. STEP 6 a. Reattach faceplate. Ensure all four corners have snapped together properly. Knock out direction arrow(s), as appropriate for your light fixture location. b. Turn on power. Battery may need 24 hours to charge before light fixture is used for emergency purposes. 5 Product Details Wiring Diagram Specifications Voltage Wattage Power Factor CRI Weight Housing Material Dimmable 120V-277V 3.3W 0.48 80 1.61lbs ABS+PMMA No Beam Angle Lumens IP Rating Battery Power Source Amps Warranty 6 120 300LM IP20 3.6V1000mah NI-MH Battery 0.32A 3 Years Common Troubleshooting Feeling in the dark about an issue with your product? No If you still need some assistance, please feel free to worries! Our troubleshooting section is here to shed some light contact us with any questions. Our team of lighting experts and provide you with easy-to-follow solutions for any problem. are happy to help brighten your day. Installation Light isn't turning on. Light unexpectedly fails. Battery Light not lasting on a single charge. Battery is not charged. Test light is not working. Flickering Light is flickering when turning on. Light flickering with other lights on the same circuit. Light flickering when turned on. Buzzing Fixture buzzing with power outages. Fixture buzzing with appliances or electronic devices. Double check if fixture is properly connected and circuit breaker hasn't been tripped. For further assistance, reach out to customer support. Ensure the battery is properly connected and compatible. Verify the battery is securely plugged in and the supply wires are properly connected. Ensure the battery is properly connected. Check that fixture wiring connections are secure. Check that the lights on the same circuit are not overloading the circuit. Verify fixture compatibility and that it is grounded. Verify light is connected to surge protector securely. Look for nearby interferences that can cause buzzing. Such as televisions, radios, computers, etc. 7 Customer Support Warranty Policy This product is covered by our industry leading 3 year warranty. It gets even better - scan the QR code for 2 extra years of protection! Secxatnramyeeafrosr! two 30 Day Return Policy At Sunco, we value our customers and stand by the quality and performance of our products. If you are not completely satisfied with your purchase, we accept returns within 30 days of your purchase date. Customer Service Our Los Angeles team of lighting experts is here to assist you with all your needs! Contact us at: Email: support@sunco.com Call or Text: (844) 334-9938 8 Lighting made better. support@sunco.com (844) 334-9938 REV1.0 AMERICAN COMPANY