UNITEK uHub H6+ for Surface Pro
6 in 1 USB3.1 Hub Adapter with dual USB-A + Dual Card Readers + HDMI + Mini DisplayPort
User Manual
This manual provides an introduction to using this 6 in 1 USB3.1 Hub Adapter. However, the information in this document is subject to change from time to time without notice. No guarantee can be given to the correctness of its contents, and no representations of product warranty are made.
Product Overview
The USB3.1 Hub Adapter enables multiple connections between Surface Pro 4/5/6 and any USB devices, 24mm and 11mm size memory cards, as well as HDMI 4K input and Mini DisplayPort 4K input displays.
Features
- Dual USB3.1 Gen1 Type-A female ports offer SuperSpeed up to 5Gbps data transmission speed. Backward compatible with USB2.0/USB1.1.
- With 24mm & 11mm size card readers, able to read both memory cards simultaneously.
- Both card readers support card capacity up to 2 TB.
- With HDMI 1.4 port, supports HDCP 1.4, outputting as 4K@30Hz.
- With Mini DisplayPort 1.2 port, supports connection with a display at 4K@60Hz.
- The USB3.1 Hub Adapter supports a single display at a time.
- Compact aluminum housing offers a stylish look.
- Plug and play, no installation is required.
- Supports Microsoft Surface Pro 4/5/6.
- Supports Windows 10.
Specifications
| Product Dimension | 115mm x 42.35mm x 9.5mm |
|---|---|
| Upstream | 1 x Mini DisplayPort 1.2 Male & 1 x Full-size USB3.1 Male |
| Downstream | 2 x USB3.1 Gen1 Type-A Female |
| 1 x HDMI | |
| 1 x Mini DisplayPort | |
| 1 x 24mm Memory Card Slot | |
| 1 x 11mm Memory Card Slot |
Note
- Do not disassemble this hub or expose it to humidity or high-temperature environments, or direct sunlight.
- Improper use, disassembly, or any other operation that does not follow these instructions will result in damage to your devices or this hub. UNITEK will not be responsible for any compensation or maintenance under these circumstances.
- When transferring data from other USB devices, it is recommended not to unplug the adapter until the data transfer is completed. Otherwise, the transmission may be interrupted. Please eject your adapter or the connected devices properly before unplugging.
产品说明 (Product Description)
此产品可以连接Surface Pro 4/5/6 (需要配備並排的USB-A及Mini DisplayPort接口) 连接至额外的USB装置、4K解像度的HDMI 或Mini DisplayPort 显示装置、24mm&11mm记忆卡,让你的Surface Pro胜任更多工作。
产品功能 (Product Features)
- 双USB-A传输接口,采用USB3.1 Gen1传输规范,提供高达5Gbps超高速传输速度,充分发挥效率,同时向下兼容USB2.0及USB1.1。
- 配有24mm记忆卡读卡器及11mm记忆卡读卡器,两者之间能够同时读取及交换数据档案。
- 两个读卡器均支援SDHC及SDXC格式,支援最大容量2TB。
- HDMI 1.4 版本,支援4K@30Hz输出及HDCP 1.4。
- Mini DisplayPort 1.2 版本,支援4K@60Hz输出。
- 此产品同一时间只能够输出至单一显示装置。
- 铝合金材料,高档耐用。
- 即插即用,无需安装。
- 支援Surface Pro 4/5/6。
- 支援Windows 10。
产品规格 (Product Specifications)
| 尺寸大小 (Dimensions) | 115mm x 42.35mm x 9.5mm |
|---|---|
| 上行 (Upstream) | 1 x Mini DisplayPort 1.2 Male & 1 x Full-size USB3.1 Male |
| 下行 (Downstream) | 2 x USB3.1 Gen1 Type-A Female |
| 1 x HDMI | |
| 1 x Mini DisplayPort | |
| 1 x 24mm 记忆卡插槽 (Memory Card Slot) | |
| 1 x 11mm 记忆卡插槽 (Memory Card Slot) |
注意事项 (Important Notes)
- 避免在阳光直射、极高温、雨水或潮湿的环境下使用此产品,无论时间长短。
- 任何不当操作、拆开或改装、未有按照本手册的指示使用此产品,均有机会导致此产品或你的装置损毁或故障。在此情况下,本公司将不会就此承担任何责任或赔偿。
- 使用此产品与USB装置正进行数据传输时,请尽量减少或避免热插拔,直至数据传输完成。我们建议你在执行「安全移除硬件」后,才正确地拔出此产品或连接此产品的装置。
