TOGAR T9 Mechanical Keyboard User Manual

Product Overview

This manual provides instructions for the TOGAR T9 Mechanical Keyboard, covering its various connectivity modes, pairing procedures, backlight customization, multimedia functions, and indicator lights.

Product Basic Information:

• Model: T9
• Brand: TOGAR
• Size: 403.8(L) x 139.6(W) x 40.1(H) ±2 mm
• Layout: 101 Keys
• Axis: Mechanical Axis
• Version: USB/2.4G/Bluetooth
• Warranty: 12 months for non-human damage.

Note: Keyboard manual graphics are for reference only. Please refer to the actual product.

Connectivity Modes

The TOGAR T9 keyboard supports three connectivity modes:

• Bluetooth Mode: Connect wirelessly via Bluetooth.
• 2.4G Mode: Connect wirelessly using the included USB receiver.
• USB Mode: Connect via the included USB Type-C data line.

Pairing Methods

Bluetooth Pairing

1. Press and hold any of the FN + Q, FN + W, or FN + E keys for 3 seconds. The indicator light will flash slowly, indicating the keyboard is in pairing status.
2. Turn on Bluetooth on your computer or mobile device. Search for and connect to the device named "TOGAR 3.0" (for Windows 7) or "TOGAR 5.0" (for Windows 8 or above), or other mobile devices.
3. Complete the connection process.

You can pair up to 3 Bluetooth devices. Short press FN + Q, FN + W, or FN + E to switch between paired devices.

2.4G Pairing

1. Turn the switch to the 2.4G mode.
2. Press and hold FN + P for pairing. The P key will flash.
3. Insert the USB receiver into your device.
4. The P key will stop flashing, indicating successful pairing. Slow flashing indicates the keyboard is in a reconnection state.

FN + TAB can turn the code indicator light on/off.

Receiver Storage

The receiver has been paired with the device at the factory. This pairing method is only used for the first-time setup or when the 2.4G connection fails. It does not need to be set up every time.

System Switching

Switch between Windows and Mac operating systems:

• For Windows: Press FN + P
• For Mac: Press FN + [

Backlight Control

Basic Backlight Switching:

• FN + ↑: Cycle through backlight modes.
• FN + ↓: Decrease brightness.
• FN + →: Increase dynamic speed.
• FN + ←: Decrease dynamic speed.
• FN + F2: Increase brightness.
• FN + 0 (or O): Turn backlight off/on.

Custom Backlight Settings:

1. Press FN + F1 to select a set of backlight modes.
2. Press FN + F2 to enter custom backlight settings.
3. Press the keys that need to be recorded to set the custom backlight. Complete other key backlight settings.
4. Press FN + F2 again to save and exit.

FN + TAB (long press for 3 seconds) restores factory settings.

Multimedia Keys

The keyboard features multimedia keys that function differently depending on the operating system.

Multimedia Keys for Windows

• FN + F1: Computer
• FN + F2: Browser
• FN + F3: Mailbox
• FN + F4: Media Player
• FN + F5: Previous Song
• FN + F6: Play/Pause
• FN + F7: Next Song
• FN + F8: Stop
• FN + F9: Mute
• FN + F10: Volume -
• FN + F11: Volume +
• FN + F12: Calculator

Multimedia Keys for Mac

• FN + F1: Brightness -
• FN + F2: Brightness +
• FN + F3: Previous Song
• FN + F4: Play/Pause
• FN + F5: Next Song
• FN + F6: Mute
• FN + F7: Volume -
• FN + F8: Volume +
• FN + F9: Calculator
• FN + F10: Browser
• FN + F11: Mailbox
• FN + F12: Computer

Pilot Lamp & Battery Indicator

Indicator Lights:

• Num Lock: [Num Lock indicator]
• Caps Lock: [Caps Lock indicator]
• Scroll Lock: [Scroll Lock indicator]
• Win Lock: [Win Lock indicator]

Charging: Plug in the USB Type-C cable. The indicator light will show charging status. Four solid lights indicate a full charge.

Battery Level Indicators:

• Four lights solid: 75% - 100%
• Three lights solid: 50% - 75%
• Two lights solid: 25% - 50%
• One light solid: 0% - 25% (flashing when battery is low)

Auto-Sleep: The keyboard backlight automatically turns off after 5 minutes of inactivity to save power. Press any key to wake the keyboard.

Note: FN + Enter toggles the function of indicator lights.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.