Touch Screen Bluetooth Headset

Model: YW03

1. Product Structure

Product Name: Ear mounted Bluetooth earphones

Touch Panel: Located on the outer side of each earphone.

High definition digital display

Charging contact

Product Name: Touch screen Bluetooth headset

BT version: 5.4

Charging compartment battery: 380mA

Transmission radius: 10m

Music time: About 4 hours

Charging interface: USB Type-C

Charging time: About 1.5h

2. Bluetooth Pairing

Steps:

  1. Open the charging case. The earphones will automatically turn on and pair with each other (left and right).
  2. Open the Bluetooth settings on your device.
  3. Select "YW03" from the list of available devices.
  4. Pairing is successful.

Note:

3. Usage

Wearing the Earphones:

  1. Hold one earphone and place it on your ear like an earring.
  2. Adjust the position up and down for the best listening experience.

Basic Operations (Touch Panel):

4. Up to 13 Functions

The headset supports various functions including:

5. Position and Operation Method of Operation Buttons

The touch panels are located on the outer sides of each earphone. Gentle touch is required for operation.

Pairing: Earphones automatically pair when the charging case is opened. Search for "YW03" on your device's Bluetooth.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Safety Precautions

Hearing Protection:

Usage and Handling:

Fire and Electric Shock Prevention:

Models: 2BEWA-HY-Y11, 2BEWAHYY11, A9 Pro Touch Screen Bluetooth Earphones, A9 Pro, A9 Pro Bluetooth Earphones, Touch Screen Bluetooth Earphones, Bluetooth Earphones, Touch Screen Earphones, Earphones

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7482818 Acrobat Distiller 19.0 (Windows)

Related Documents

Preview FCC Confidentiality Request for Model HY-Y11 (2BEWA-HY-Y11)
This document is a confidentiality request submitted to the Federal Communication Commission (FCC) for the HY-Y11 model (FCC ID: 2BEWA-HY-Y11), detailing long-term and short-term confidentiality for various exhibits.
Preview HY-X15ULTRA Earbuds: Label and Location Information
Details on the label placement and FCC ID (2BEWA-HY-X15ULTRA) for the Shenzhen Hanyin Technology Development Co., Ltd. HY-X15ULTRA wireless earbuds, including product dimensions.