Remote Control User Manual

Key Chart

MENU: Takes you to your content menu screen.

GUIDE: Displays program guide.

VOLUME: Controls and mutes TV volume.

TRANSPORT: Controls DVR programming.

VOICE: Activates voice search functionality using the microphone at the top of the remote.

BACK: Exits current menu and returns to the current program.

STB: Powers ON and OFF your set-top box.

TV Brand Setup

Configuration TV de la marque

1. Press and hold Play/Pause + OK until the Feedback LED starts blinking.
2. The Feedback LED will stop blinking to confirm pairing.
3. If Pairing is unsuccessful, hold OK + BACK for 3 seconds to clear any previous pairing information and the feedback LED blinks twice. Repeat Steps 1 and 2.

Audio Device Brand Setup

Configuration d'appareil Audio

1. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
2. Press Volume Up key. The feedback LED will blink twice.
3. Complete.

Set Top Box Setup

Configuration du décodeur (STB)

1. Turn on the TV that you wish to setup.
2. Find your STB brand in the QuickSwap table below. Note the number that corresponds to your device brand.
3. Press and hold the OK + Action Key that corresponds to your device brand until the LED blinks once confirming the selection.
4. Press the CH^ button to see if STB changes. If it does, setup is complete.
5. If this does not work for your device, proceed to Direct Code Entry steps.

TV Brand / Marque de télévision

Audio Brand / Marque audio

Volume Lock / Verrouillage du volume

To Lock Volume / Pour verrouiller le volume

1. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
2. Enter Corresponding Device Digit to lock Volume to. The feedback LED will blink twice.
3. Complete.

To Unlock Volume / Pour déverrouiller le volume

1. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
2. Press the Mute key. The feedback LED will display four blinks to indicate that the volume has now been unlocked.
3. Complete.

Direct Code Entry For TV’s

Saisie directe de codes pour les appareils TV

1. Turn ON the TV.
2. Refer to Code List for the brand setup code for the device you would like to control (SEE REVERSE SIDE OF THIS MANUAL).
3. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
4. Press the Power key on the remote control.
5. If your TV turns off, the process is complete. If TV does not turn off, repeat steps 2 to 7 using the next code in the Chart.

Direct Code Entry for Audio Devices

Saisie directe de codes pour appareils audio

1. Turn ON the Audio Device.
2. Refer to Code List for the brand setup code for the device you would like to control (SEE REVERSE SIDE OF THIS MANUAL).
3. Press and hold OK/SELECT and MUTE until the feedback LED blinks twice.
4. Press digit key 2.
5. Enter the 4 digit device code. The feedback LED will blink twice to indicate successful programming.
6. If your Audio Device turns off, the process is complete. If device does not turn off, repeat steps 2 to 7 using the next code in the Chart.

Getting Started

This section provides general guidance and regulatory information, including FCC and Industry Canada statements regarding compliance and operation.

Code Lists

Extensive lists of setup codes for various TV and Audio brands are provided. Users should refer to these lists to find the appropriate code for their specific device.

Example TV Brands: Samsung, Sony, LG, VIZIO, Panasonic, Philips, Sharp, etc.

Example Audio Brands: Bose, Denon, Yamaha, Onkyo, JBL, Sony, LG, etc.

For a complete list, please refer to the full documentation.