3-in-1 Wireless Charger User Manual

Model: A8

Product Description

This document provides instructions for the 3-in-1 wireless charger, a device designed to charge multiple compatible devices simultaneously.

Product Dimensions:

Unfolded Size: 390*91.5MM
Finished Size: 65*91.5MM

Important Safety Instructions

Do not store the device in high-temperature environments, including those caused by intense sunlight or other forms of heat.
Do not place the device in fire or other excessively hot environments. Exposure to fire or temperatures above 212°F (100°C) may cause an explosion.
Do not use the wireless charger in excess of its output rating. Overloading outputs above the rating may result in a risk of fire or injury to persons.
Do not expose the wireless charger to rain or snow.
Do not modify, repair, or disassemble the unit. If necessary, contact the manufacturer.
Switch off the wireless charger when not in use. The wireless charger will automatically switch off when disconnected from its wall charger.

Diagrams and Usage

The manual includes diagrams illustrating the setup and use of the 3-in-1 wireless charger. These diagrams show the placement of devices for charging.

Charging Steps:

Connect the wireless charger to a QC 3.0 fast charging wall adapter.
Place your Qi-enabled phone on the phone charging area.
Place your Apple Watch on the watch charging area.
Place your AirPods on the AirPods charging area.
Ensure your devices are accurately positioned on their respective charging areas for optimal charging.
Disconnect the device from power when cleaning.
A humming noise may be heard when close to the charger; this is normal and indicates temperature adjustment for efficient charging.
If the device is not fully charged, it may be due to high environmental temperature. Recharge after the temperature has lowered. The charger has temperature control to safeguard your device.

Applicable Devices

This wireless charger is compatible with a wide range of devices:

For Phones: iPhone 14/14 Pro/14 Pro Max, iPhone 13/13 Pro/13 Pro Max, iPhone 12/12 Pro/12 Pro Max, iPhone 11/11 Pro/10 Pro Max, iPhone Xs/Xs Max/XR/X/8/8 Plus, Samsung Note5/Note8/Note9/Note10/10+, Samsung Galaxy S6/S6 edge/S6 edge+/S7, Samsung Galaxy S8/S8+/S9/S9+/S10/S10+/S20/S20+, HUAWEI Mate RSPorsche/Mate 20 Pro/20 RSPorsche, HUAWEI Mate 30/30 5G/30 Pro/30 Pro 5G/30 RSPorsche/P30 Pro/P40 Pro, XIAOMI 9/9 Pro 5G/10/10 Pro, XIAOMI MIX 2S/3, and other Qi-compatible cell phones.
For Earbuds: Apple Airpods 3/2, AirPods Pro (requires a wireless charging case).
For Watches: Apple Watch 8/7/6/5/4/3/2.

Important Notes

The Watch Wireless Charging Area supports Apple Watch only.
Remove your phone case before charging if its thickness is greater than 3 mm or if it makes your phone longer than 164 mm.
Only use a certified QC 3.0 Fast Charging Wall Adapter to power the device. Do not plug into a computer USB port or any other non-certified USB port. Shenzhen Xingtuowei Electronic Co.,Ltd is not responsible for malfunctions due to unsupported adapter use.
Place your Qi-enabled device accurately in the wireless charging area when charging.
A QC 3.0 fast charging adapter is required when charging 3 devices simultaneously or for a fast charging effect.

Q&A

Q: If the LED light flashes and the wireless charging dock doesn't work, how can I deal with this problem?

1. Ensure your device supports the Qi wireless charging function.
2. Check if you are using a QC3.0 9v/2a adapter to power the wireless charger.
3. Test with other USB cables.
4. Check if your device's case has metal objects. Magnetic and metal attachments can cause the LED to flash and prevent charging.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.