Beelink Mini S User Manual

After Service

For support and inquiries:

• Email: Mini.PC.Support@bee-link.com
• TV BOX Support: support@bee-link.com
• Call Us: +86-15013633117 / +863118

Manufacturer: Shenzhen JW Technology co.,Ltd.
Address: 4th Floor,Building 18,Longrun Industrial Park,Bujiwo,Longhua New District,Shenzhen,China

For video tutorials and forum discussions, please visit the Beelink website.

Basic Operation

Buttons and Ports

The Beelink Mini S features a variety of ports for connectivity:

Front Panel:

• 1. USB3.0 port
• 2. MIC headphone jack
• 3. Power button
• 4. LAN port

Rear Panel:

• 5. HDMI port
• 6. DC in port
• 7. Security keyhole

Wall-Mounting: The device includes a bracket for wall mounting or attachment to the back of a display, secured with screws.

Connection Steps

Follow these steps to connect your Beelink Mini S:

1. Connect the power supply: Plug the power adapter into the DC in port on the rear panel and then into a power outlet.
2. Connect to the monitor: Use an HDMI cable to connect the Mini S to your monitor's HDMI input port.
3. Connect keyboard and mouse: Plug your USB keyboard and mouse into the available USB ports on the front or rear panel.

Hardware Installation

DDR Memory Installation

Ensure the device is powered off and unplugged before proceeding with hardware installation.

Procedure:

1. Open the device cover.
2. Locate the DDR memory slot.
3. Align the notch on the memory module with the notch in the slot.
4. Insert the memory module at approximately a 30-degree angle.
5. Gently push the module down until it clicks into place, securing the clips on both sides.

Note: The guide for HDD installation is inscribed on the HDD cover.

SSD Card Installation

Ensure the device is powered off and unplugged before proceeding with hardware installation.

Procedure:

1. Open the device cover.
2. Locate the M.2 slot for the SSD.
3. Align the SSD with the M.2 slot, ensuring the tabs on the SSD match the slot.
4. Slide the SSD into the slot at a slight angle.
5. Gently push the SSD down and secure it with the provided screw.

Changing Audio Playback Devices on Windows

Connect speakers, headphones, a webcam with a built-in microphone, or Bluetooth audio devices to your Windows PC. Follow these steps to select the desired audio output device:

1. Click the sound icon located in the notification area (also known as the system tray) on your Windows taskbar.
2. From the context menu that appears, click the option "Select playback device".
3. A list of available audio devices will be displayed. Select the desired device (e.g., Speakers, Headphones, or a specific audio output like '227W [HDMI Display Audio]') by clicking on it. The selected device will be highlighted and show a volume control.

Cautions and Precautions

To ensure the best user experience and maintain product integrity, please observe the following:

• For cleaning, use only mild chemical solvents and a soft, dry cloth. Avoid using flammable sprays or corrosive cleaning agents.
• Do not place the product near fire or heat sources to prevent accidents.
• In case of fire, do not attempt to extinguish it yourself; evacuate the area and contact emergency services.
• Handle the product with care to avoid dropping or impact damage.
• Ensure all cables are properly connected and secured to prevent damage or malfunction.
• Do not discard the product with general household waste. Dispose of electronic waste according to local regulations.
• Operating Environment: Temperature: -10°C to 45°C, Humidity: 30% to 90%.
• Storage Environment: Temperature: -20°C to 60°C, Humidity: 10% to 90%.

HDMI Information: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress (design and image commercial HDMI), and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.