Instruction Manual for STARK TECHNOLOGIES models including: HY-30, HY-30 Wireless Vibration Detector, Wireless Vibration Detector, Vibration Detector, Detector
14 ore fa — MANUAL. •. Wireless Vibration Detector. HY-30. • f:- p >ClU t. r. ,I.I e !, It with our comp r y ,osr. Ell. 1.Brief Instruction. This product is a micro power ...
1 day ago — MANUAL. •. Wireless Vibration Detector. HY-30. • f:- p >ClU t. r. ,I.I e !, It with our comp r y ,osr. Ell. 1.Brief Instruction. This product is a micro power ...
STARK
OPERATING MANUAL
·
Wireless Vibration Detector HY-30
· f:- p >ClU t r with our comp r y ,osr
,I.I e !, It
Ell
1.Brief Instruction
This product is a micro power consumption, high stability smart wireless vibration detector. It adopts advanced signal analysis and processing technology to ensure product stability from the design. The mechanical vibration will trigger the detector to alarm when intruder use tools to destroy buildings and other equipment.
This product is suitable for the prevention of warehouses, fences.ATM machine that made of reinforced concrete, brick. This wireless vibration detector can effectively prevent treasury, arms and magazine, museums and other equipment from chiseling wall, punching hole.
2.Functlon Features
Super micro power consumption design Smart signal analysls and processing technology Sensitivity support three levels adjustment Automatically detect and prompt installed battery's old and new Battery low power prompt function
Ell
3.Technlcal Specification
Working voltage: DC3V (2pcs CR2032 lithium battery) Working current:s1OuA (static current), s18mA (alarm current) Wirelessdistance: .!:1OOM {open area) Wireless frequency: 433.92MHz Working temperature: -20'C-+60'C Working humidity: s80% (without condensation)
4.Usage Instruction
4.1 Close Detection
When detector is vibrated, the detector red light is on and sends wireless signal to the alarm panel. After alarm, detector will automatically turn off the detection for 5 seconds, after 5 seconds detector will work normally.
4.2 Sensitivity Adjustment
After the detector is installed, please adjust the sensitivity according to specific situation. H mean high sensitivity, large protection area; L mean low sensitivity, small protection area.
Ell
4.3 Battery Prompt When user install new battery voltage below 2.6V, the detector will turn off alarm function and green light will flash. During the usage, when the battery is low, the detector green light flashes once every 15 seconds, to remind user to change battery.
5.Product Installation The detector's detection range is related to installation position and Its structure, and generally installs in the middle of protection area. Once the Installation position Is selected, the detector can be secured with screws or double sided tape.
· notice When install the accessories, please avoid installing on objects with a lot of metal and wires.
Ell
u
D
1,
/,
(Figure1)
(Figure2)
Ell
/ Wireless Vibration Detector User Manual V1 .1
Corel PDF Engine Version 14.0.0.701