User Guide for TKH SECURITY models including: FD2002v2M, 2MP Vandal Fixed Dome Camera
Installation Notices. CAUTION INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL ONLY. INSTALLATION SHALL BE IN ACCORDANCE WITH LOCAL PROCEDURES.
» FD2002v2M
File Info : application/pdf, 2 Pages, 664.12KB
DocumentDocumentFD2002v2M 2MP Vandal Fixed Dome Camera Quick Start Guide Unpack Mounting Plate Duster Camera Unit CAT-6 RJ45 conduit & Pin pusher Screws(4x) & Plastic Screw Anchors (4x) Conduit Security Torx Quick Start Guide Subject to modification. Actual product and accessories may differ in appearance. Connector Definition No. Connector 1 Alarm I/O Definition Alarm I/O connection 2 Audio I/O RJ-45 Port 3 (Contact Siqura for a compatible PoE injecter.) 4 Power(DC 12V) 5 Reset Button 6 Micro SD Card Slot Line In and Line Out connection For network and PoE connections Power Connection Press the button with a proper tool for at least 20 seconds to restore the system. Insert the SD card into the card slot to store videos and snapshots. Do not remove the SD card when the camera is powered on. Table 1 Connector definition © TKH Security B.V. 2021 | Vision 1 (20211123) | FD2002v2M QSG Find additional manuals, the datasheet, the EU Declaration of Conformity, and the latest firmware for this product at: tkhsecurity.com Installation Notices CAUTION INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL ONLY. INSTALLATION SHALL BE IN ACCORDANCE WITH LOCAL PROCEDURES. THE CAMERA CONTAINS BATTERIES. DO NOT REPLACE IN RISK OF EXPLOSION. BATTERY REPLACEMENT SHALL NOT BE APPLIED IN VIEW OF THE RISK OF EXPLOSION. LE REMPLACEMENT DES PILES NE DOIT PAS ÊTRE APPLIQUÉ AU RISQUE D'EXPLOSION. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS.. FOR "PoE" INPUT CONNECTION, USE ONLY WITH UL LISTED I.T.E WITH "PoE" OUTPUT. DESCRIPTION FOR THE "PoE" IS INTENDED TO BE CONNECTED TO NOT EXPOSED (OUTSIDE PLANT) NETWORKS OR EQUIVALENT STATEMENT IN INSTALLAION INSTRUCTIONS. POUR LA CONNEXION DâÇÖENTREE "PoE", UTILISER UNIQUEMENT AVEC UN I.T.E. LISTE AVEC UNE SORTIE "PoE". LA DESCRIPTION DE "POE" EST CONÇUE POUR ÊTRE CONNECTÉE À DES RÉSEAUX OR NON ÉNONCÉS (INSTALLATIONS EXTÉRIEURES), DANS LES INSTRUCTIONS D'INSTALLATION DE L'INSTALLATION. Camera Cabling Figure 2 Cabling Connectors 1 2 3 5 6 4 Figure 1 Camera Connectors RESET BUTTON TAKES 10 SECONDS TO BE EFFECTIVE. IT WILL RESTORE FACTORY DEFAULT SETTINGS, INCLUDING IP ADDRESS, USERNAME AND PASSWORD. Waterproof Notice Please make sure the rubber is properly aligned during installation. Figure 3 Rubber Accessing the Camera - DHCP DHCP Accessing the camera Fixed IP 30s IP = 10.x.y.z Network Switch IP = 10.x.y.z IP = 192.168.1.x Network Switch IP = 192.168.1.x Auto detect with SDM2 1 SDM2-vx.xx-setup.zip Tkhsecurity.com Eprnotdeur ctot pthaegec,aLminekra& Download section 2 3 DHCP 1st time camera login Set a strong password DHCP 1st time camera login Look for SDM2 Browser-based Viewer x6W@oM0a!9#F qwer1234 x6W@oM0a!9#F 11 © TKH Security B.V. 2021 | Vision 1 (20211123) | FD2002v2M QSG IT IS NOT RECOMMENDED TO CONTINUOUSLY (24/7) RECORD WITH THE MICRO SD CARD, AS THE CAMERA MAY NOT SUPPORT LONG-TERM CONTINOUS DATA READ/WRITE. CONTACT THE MANUFACTURER OF THE MICRO SD CARD FOR INFORMATION REGARDING THE RELIABILITY AND THE LIFE EXPECTANCY.Microsoft PowerPoint for Microsoft 365