Porodo 4G/LTE Home & Outdoor Portable Router
Model: PD-4GCPMF-BK
Product Overview
The Porodo 4G/LTE Home & Outdoor Portable Router provides high-speed internet connectivity for both home and outdoor use. It supports 4G/LTE networks and offers Wi-Fi sharing capabilities.
Product Display and Indicators
The router features a compact design with indicator lights and various interfaces.
Indicator Lights
| Indicator | Implication | Status | Description |
|---|---|---|---|
| ? Wi-Fi | Wi-Fi indicator | Green always on | Wi-Fi is on. |
| Off | Wi-Fi is abnormal or off. | ||
| Flashing green | User connected. | ||
| ? Battery | Battery message indicator | Flashing green | Battery is Charging. |
| Green always on | Battery power is more than 30% or full charge. | ||
| Red always on | Battery power is less than or equal to 30%. | ||
| Off | No network. | ||
| ? Signal | Signal Indicator | Green always on | Data connection is open. |
| Flashing green | Data connection is closed. | ||
| ⚙️ System | System Indicator | Green always on | Device power on, light is on. |
Interface Key Description
| Interface | Description | Function |
|---|---|---|
| ?️ 5 SIM | SIM card slot | Using Micro Sim. |
| ▶️ 6 Power | Power button | In the shutdown state, press and hold 10 seconds to start the device. In the power on state, press and hold 3 seconds to release, and the device will shut down. |
| ? 7 USB | USB interface | Device power supply/battery charging interface. When the external power supply is connected, the device starts automatically. |
| ? 8 LAN | LAN interface | RJ45 port. Connect to LAN to connect to PC. The router is set to wired broadband mode or access to WAN, and is used as a WAN port. |
| ↩️ 9 RESET | Reset hole | Insert and hold the pin for 3-5 seconds to reset the router to factory settings. |
Working Environment
To ensure the router works properly, the recommended working environment is as follows:
- Keep away from heat sources and ensure ventilation.
- Place the router on a horizontal table.
- Place the router in a dust-free and dry environment.
- In case of thunderstorms, please remove the power supply and all cables from the router to avoid damage by lightning.
Installation Instructions
- Insert the SIM card into the SIM slot in the direction marked by the silk screen.
- Press and hold the switch key for 10 seconds, and then let go.
- Use a mobile phone to search for the Wi-Fi signal sent by the device and connect to the Wi-Fi to experience the network.
Diagram Description: A diagram shows the rear panel of the router with ports labeled SIM, USB, LAN, and RESET. An arrow indicates the direction for SIM card insertion into the SIM slot.
Connecting Devices
You can connect devices to the router in the following ways:
1. Wired Connection
Before accessing the Web settings page, it is recommended to set your computer to "Obtain an IP address automatically" and "Obtain DNS server addresses automatically".
Diagram Description: A screenshot of a Windows network configuration window titled "Internet Protocol Version 4 (TCP/IP) Properties". It shows options for obtaining IP and DNS addresses automatically, or using the following addresses.
2. Connect via Wi-Fi
Use your phone to search for the wireless router's network and connect to it.
- Default Wi-Fi name (SSID): 4G-WIFI-XXXX
- Default Wi-Fi password (Key): 1234567890
Diagram Description: A mobile phone interface shows Wi-Fi settings. Options include "Turn on or turn off WLAN", "WLAN+", and "Available networks". A network named "WIFI_088424" is listed, indicating a Wi-Fi signal.
Device Login
- Connect the Wi-Fi signal transmitted by the device with a mobile phone or computer. Refer to the device nameplate for details.
- Open a web browser (Google/Edge browser is recommended), enter the default IP address in the browser address bar, and access the Web page. Enter the default password "admin" to enter the setting page.
Diagram Description: A login screen displays fields for entering a password and a "Login" button. Below this, a dashboard interface is shown with sections for SMS, SSID, Advanced Settings, and Quick Settings. Key areas include "Connect Status" (showing connection status, speed, and time), "Network Settings", "Connected routers" (cable and wireless counts), and "Statistics". A "Status Information" section lists SIM Card Number, IMEI, RSRQ, SINR, PCI, IMSI, Signal Strength, and Network Name (SSID).
Quick Settings
1. Wi-Fi Setting
Click "Set Wireless Intranet" to enter the Wi-Fi setting page, where you can modify the SSID name, Wi-Fi password, etc.
- Wi-Fi Switch: Enable/Disable
- Multi SSID Switch: Enable/Disable
- Main SSID: Network Name (SSID*) (e.g., 4G-WIFI-67A1)
- SSID Broadcast: Checkbox
- Security Mode: WPA-PSK/WPA2-PSK
- Pass Phrase: Password input field (requires at least 8 characters)
- Show on Icd: Yes/No
- Max Station Number: Dropdown selection (e.g., 32)
An "Apply" button is available to save changes.
2. APN Setting
Click "Set Internet Connection" and "APN Setting" to enter the APN configuration page, where you can modify the APN access point and other information.
Diagram Description: The APN configuration screen shows fields for "Current APN" (e.g., CUCC), "Mode" (Auto/Manual), "Profile" (e.g., CUCC), "PDP Type" (e.g., IPv4v6), "Profile Name" (e.g., CUCC), "APN" (e.g., 3gnet), "Authentication" (e.g., PAP), "User Name", and "Password". An "Add New" button is also present.
FAQ
- 1.Q: Can't open the router's login page on my browser?
- A: Please check if your phone or computer is connected to the router and make sure the IP address "192.168.2.1" you entered is correct.
- 2.Q: How to reset the router to factory default settings?
- A: Keep the router powered on, then press and hold the WPS/RST button for more than 5 seconds and then release it and wait for the router to reboot.
- 3.Q: How can I forget the login username and password of the router?
- A: Reset the router to factory default settings. The user name and password will be restored to the default administrator password.
- 4.Q: How can I forget the Wi-Fi password of the router?
- A: Reset the router to factory default settings. The Wi-Fi password will be restored to the default state.
Disclaimer / Caution
- Please use the original power adapter (specification: 12V⎓1A). The company will not be responsible for problems caused by aftermarket adapters.
- Avoid using this device near metal structures or equipment that emits electromagnetic waves, as this may affect signal reception.
- This device is not waterproof; keep it dry and store it in a cool environment.
- Do not use this equipment after a drastic change in temperature. Condensation may occur inside or outside the device. Wait for condensation to disappear before using the equipment.
- Handle the equipment carefully. Do not drop, bend, or bump it to avoid irreparable damage.
- Do not disassemble the equipment by unprofessional persons. For repair, go to a designated professional repair location.
- Recommended use environment: 0~35°C and humidity is 5%~95%.
- Only the original battery is allowed to be used to avoid equipment damage or explosion. Follow instructions for disposal of used batteries.
Warranty Card
Thank you for purchasing Porodo products. You will enjoy the following services:
1. Warranty Services:
- If the device has performance issues but no appearance damages, it can be replaced with a new device within 7 days of purchase.
- The warranty period is 12 months from the date of purchase. During this period, service centers will repair or replace parts for manufacturing defects without charge.
2. Conditions Not Covered Under Warranty:
- Warranty period expires.
- The seal label is damaged, altered without permission, or missing.
- Unauthorized disassembly or repair.
- Man-made damage resulting in product damage or deformation.
- Damages resulting from abnormal environments (high-pressure, high temperature, high humidity).
- Damages caused by natural disasters (lightning strikes, flooding, earthquakes, etc.).
You can get "Paid Repair" if your product does not meet the conditions of our warranty services.
