Nexa MYCR-3500 Plug-in On/Off
Quick Start Guide
Setup Instructions
-
Step 1: Plug in the Receiver
Plug the receiver into a power socket.
(Swedish: Sätt mottagaren i eluttaget.)
(Norwegian: Koble mottakeren til stikkontakten.)
(Finnish: Kytke vastaanotin pistorasiaan.)
-
Step 2: Pair with Remote
Press the “ON” button on any System Nexa remote control within 6 seconds.
(Swedish: Tryck på "PÅ” knappen på valfri System Nexa fjärrkontroll inom 6 sekunder.)
(Norwegian: Trykk på "PÅ”-knappen på valgfri System Nexa-fjernkontroll innen 6 sekunder.)
(Finnish: Paina valitun kanavan Päälle-painiketta haluamastasi System Nexa -kauko-ohjaimesta kuuden sekunnin kuluessa.)
-
Step 3: Confirmation
The connected light flashes twice to confirm successful pairing.
(Swedish: Ansluten lampa blinker två gånger.)
(Norwegian: Tilkoblet lampe blinker to ganger.)
(Finnish: Yhdistetty valo vilkkuu 2 kertaa.)
Device Controls:
- ON/OFF button
- PÅ/AV-knapp
- PÄÄLLE/POIS-painike
Technical Data
| Parameter | Value |
|---|---|
| Power supply | 220-240 V~50 Hz |
| Max. load | 3500 W RL |
| Frequency | System Nexa (433,92 MHz) |
| Range | up to 30 m |
| Memory slots | 32 |
| Power consumption | < 1 W (standby) |
| IP rating | Indoor use |
| Dimensions (W x H x D) | 53 x 53 x 58 mm |
(Swedish: Tekniska data)
(Norwegian: Tekniske spesifikasjoner)
(Finnish: Tekniset tiedot)
Further Information
A complete manual is available at nexa.se.
(Swedish: Komplett manual finns på nexa.se)
(Norwegian: Du finner fullstendig bruksanvisning på nexa.se)
(Finnish: Opas on luettavissa kokonaisuudessaan osoitteessa nexa.se)
Startsidan - NEXA
