Instruction Manual for PHILIPS models including: DDNI485 Passive Gateway, DDNI485, Passive Gateway, Gateway

[PDF] DDNI485 - Philips lightingwww.lighting.philips.com.pk › file

DDNI485 - Philips lighting

2 days ago — I dispositivi devono essere installati da un elettricista qualificato in conformità con le norme locali e nazionali vigenti in materia di costruzioni.


File Info : application/pdf, 2 Pages, 843.39KB

PDF preview unavailable. Download the PDF instead.

DYN DDNI485 II-R16
DDNI485
Passive Gateway

Installation Instructions
Instructions d'installation Installationsanweisungen Instrucciones de instalación Istruzioni per l'installazione Installatie-instructies  

Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
Les appareils doivent être installés par un électricien diplômé conformément à tous les codes et réglementations électriques et de construction nationaux et locaux.
Die Geräte sind von einem qualifizierten Elektriker in Übereinstimmung mit allen geltenden Vorschriften zu installieren.

Los dispositivos deben ser instalados por un electricista calificado y cumpliendo todas las normas y regulaciones, tanto nacionales como locales, sobre instalaciones eléctricas y obras.
I dispositivi devono essere installati da un elettricista qualificato in conformità con le norme locali e nazionali vigenti in materia di costruzioni edilizie e installazione di impianti elettrici.
De apparaten moeten worden aangebracht door een gekwalificeerde elektricien en in overeenstemming met alle nationale en plaatselijke elektriciteits- en bouwvoorschriften.

   / 
.

59 mm (2.32 in)

95 mm (3.74 in)

1 IEC Pollution Degree II

RJ12

105 mm (4.13 in) 75 mm (2.95 in)
45 mm (1.77 in)

1 ¡ ¢ £¤¥¥¡ ¦§ ¡ ¢ £0¥¡ ¦§

90%

45 mm (1.77 in)

2

PORT 2

DDNI485 PORT 1

3

4

12 V 30 mA
SHLD GND
D + D Port 1 +12 V RS-485 DyNet
RJ12

12 V

SELV/Class 2 (UL)

RJ12
Port 2 RS-485 DyNet
+12 V D D + GND SHLD

IEC Overvoltage Category III

0.3-2.5mm2 22-12 AWG
0.4 Nm 3.5 Lb-in

5

SHLD GND D+ D+12 V SHLD GND D+ D+12 V

RS-485 DyNet RS-485 DyNet

PORT 1
SHLD GND D+ D- +12V RJ12

PORT 2
RJ12 SHLD GND D+ D- +12V

 2 A

 2 A

This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

© 2022 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.

www.dynalite.com
AZZ 414 0922 R16



References

Adobe PDF Library 16.0.7 Adobe InDesign 17.2 (Macintosh)