Betstco Tractor Implements
Product Registration | Betstco Sales, Parts, and Service
Instruction Manual for BETSTCO models including: FH-D Series, FH-D Series Super Heavy Duty Trail Cutter-Flail Mower, Super Heavy Duty Trail Cutter-Flail Mower, Duty Trail Cutter-Flail Mower, Cutter-Flail Mower, Mower
FH-D Series Manual | Betstco Sales, Parts, and Service
71" Super Heavy Duty Trail Cutter/Flail Mower, FH-D180 | Betstco Sales, Parts, and Service
File Info : application/pdf, 31 Pages, 27.76MB
DocumentDocumentFH-D MOWER Series www. Betstco.com 541-895-3083 M-F 7am-4pm PST 83371 Melton Rd, Creswell OR 97426 Important Safety information--------------------------------------------------------------------5 Introduction------------------------------------------------------------------------------------------11 Section 1: Assembly and Set-up--------------------------------------------------------------12 Section 2: Operating Instructions-------------------------------------------------------------13 Section 3: Adjustments--------------------------------------------------------------------------14 Section 4: Maintenance and Lubrication---------------------------------------------------15 Section 5: Speci cations & Capacities-----------------------------------------------------------17 Section 6: Troubleshooting----------------------------------------------------------------------------17 Section 7: Appendix------------------------------------------------------------------------------------18 Parts Illustrations----------------------------------------------------------------------------------------19 Parts Request Form------------------------------------------------------------------------------------25 Safety at all times Thoroughly read and understand the instructions given in this manual before operation. Refer to the "Safety Decal", read all instructions noted on them. Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment. Look For The Safety Alert Symbol The SAFETY ALERT SYMBOL indicates there is a potential hazard to personal safety involved and extra safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and con uration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of equipment. Be aware of signal words A signal word designates a degree or level of hazard seriousness. The signal words Are: DANGER WARNING CAUTION For you protection Shutdown and storage Use safety lights and devices Transport machinery safely 20 mph 10 mph ""IMPORTANT: Keep riders achinery Practice safe maintenance Prepare for emergencies Wear protective equipment Avoid high pressure s hazard Safety Labels A B C D E Application Using This Manual Terminology " De Note : Important Owner Assistance Serial Number Plate Tractor Requirements Assembly Tractor Hook-Up Driveline Installation CAUTION Transporting NOTE: CAUTION Mowing Instructions Operating Instructions Do not Do not Do not Leveling the Mower NOTE: Cutting Height Adjustment 3-Point Hitch Adjustments CAUTION Belt Tension CAUTION CAUTION Maintenance CAUTION Knife Replacement IMPORTANT: V-Belt Installation CAUTION Storage Lubrication Driveline Shaft U-Joints Roller Bearing (Both) Cutter Rotor Bearing (Both) Gearbox Do not over IMPORTANT Driveline Pro les P roblem CAUTION Belt slipping Patches of uncut grass Excessive vibration Gearbox noisy Knives scalping grass Uneven cut Tractor loaded down by mower S olution Bolt Torque ENGLISH TORQUE SPECIFICATIONS ITEM 1 2 3 PART No. D220.001 D200.001 D180.001 D160.001 D140.001 D120.001 D220.009 D180.009 D120.009 D220.002 D180.002 D120.002 NAME & DESCRIPTION MOWER,ASSEMBLY QTY. 1 1 1 1 1 1 MODEL D220 D200 D180 D160 D140 D120 HYDRAULIC SYSTEM,ASSEMBLY 1 D220,D200 SUSPENSION SYSTEM,ASSEMBLY 1 D180,D160,D140 1 D120 1 D220,D200 1 D180,D160,D140 1 D120 ITEM 1 2 3 4 5 6 7 8 9 PART No. D220.011 D200.011 D180.011 D160.011 D140.011 D220.011 D220.004A D180.004A D120.004A D220.005 D200.005 D180.005 D160.005 D140.005 D120.005 D220.006 D200.006 D180.006 D160.006 D140.006 D120.006 D220.101 D220.030 GB11544-B1346Li D220.012 D220.013 D200.013 D180.013 D160.013 D140.013 D120.013 NAME & DESCRIPTION DECK,WELDMENT POWER TRANSMISSION,ASSEMBLY ROTOR,ASSEMBLY ROLLER,ASSEMBLY PLATE HOSE,FOR GREASE V-BELT B1346Li COVER,WELDMENT ROD,WELDMENT QTY. 1 1 1 1 1 1 MODEL D220 D200 D180 D160 D140 D120 1 D220,D200 1 D180,D160,D140 1 D120 1 D220 1 D200 1 D180 1 D160 1 D140 1 D120 1 D220 1 D200 1 D180 1 D160 1 D140 1 D120 1 1 4 1 1 D220 1 D200 1 D180 1 D160 1 D140 1 D120 10 D220.102 FLAP 11 D220.103 FLAP WITH NOTCH 12 D220.023 SKID,WELDMENT 13 D220.116 TEETH 14 D220.107 PLATE 15 D220.014 LEG,WELDMENT 16 D220.104 R-PIN 17 D220.114 LONG RAIL D180.114 D120.114 18 D220.108 SHORT RAIL D180.108 D120.108 19 N.16 NUT M16 20 B.16X60 BOLT M16x60 21 W.18 PLAIN WASHER 18 22 CP.4X32 COTTER 4x32 23 LN.12 LOCK NUT M12 24 SC.12X35 SCREW M12x35 25 W.10 PLAIN WASHER 10 26 LW.12 LOCK WASHER 12 27 B.12X25 BOLT M12x25 28 B.12X35 BOLT M12x35 29 B.10X90 BOLT M10×90 30 W.10 PLAIN WASHER 10 31 LN.10 LOCK NUT M10 32 LW.10 LOCK WASHER 10 33 B.10X20 BOLT M10×20 34 GZ.10X1 ZERK M10x1 35 RP.10X50 ROLL PIN 10x50 36 GB879-6x75 PIN 6x75 17 5 2 17 1 1 1 1 D220,D200 1 D180,D160,D140 1 D120 1 1 1 1 1 1 1 6 1 5 1 1 4 4 10 4 6 6 1 17 1 ITEM 1 2 3 4 5 6 7 8 9 PART No. D220.015 D180.015 D120.015 D220.016 D220.115 D220.105 LP-11x45 GZ.10X1 B.12X140 W.10 LN.12 NAME & DESCRIPTION QTY. MODEL SUSPENSION FRAME,WELDMENT 1 D220,D200 LINK FRAME,WELDMENT BUSH HITCH PIN,LOWER LOCK PIN 11x45 ZERK M10x1 BOLT M12x140 PLAIN WASHER 10 LOCK NUT M12 1 D180,D160,D140 1 D120 1 4 2 2 2 2 2 2 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART No. XH65.001 FFM140.402 D220.401 D180.401 D120.401 K.10X63 EFGC125.166 D220.045 D180.045 D120.045 LW.12 B.12x1.25x35 Z.6 S.45X70X8 F-UC208 C.40 GB8932-80 S.40X80X10 NAME & DESCRIPTION GEARBOX,ASSEMBLY COUPLING SLEEVE SHAFT KEY A10x63 GASKET TUBE,WELDMENT LOCK WASHER 12 BOLT M12x1.25x35 ZERK M6 SEAL 45x70x8 BEARING UC208 CIRCLIP 40 CIRCLIP 80 SEAL 40x80x10 QTY. 1 1 1 1 1 1 1 1 1 1 4 4 1 1 1 1 2 1 MODEL D220,D200 D180,D160,D140 D120 D220,D200 D180,D160,D140 D120 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 PART No. D220.004 D180.004 D120.004 D220.017 D220.109 D220.018 FLP180.111 REACH 04-4065 B.14X50 LW.14 W.14 B.14X40 B.16X1.5X40 LW.16 W.16 NAME & DESCRIPTION GEARBOX & TUBE,ASSEMBLY BASE,WELDMENT PLATE SEAT,WELDMENT PULLEY TAPER LOCK 04-4065 BOLT M14x50 LOCK WASHER 14 PLAIN WASHER 14 BOLT M14x40 BOLT M16x1.5x40 LOCK WASHER 16 PLAIN WASHER 16 QTY. 1 1 1 1 1 1 1 1 2 4 2 2 4 4 4 MODEL D220,D200 D180,D160,D140 D120 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 PART No. D220.019 D200.019 D180.019 D160.019 D140.019 D120.019 D220.111 D220.110 S.70X100X10 GB281-512 C.110 S.60x110x10 FLP180.112 REACH 04-5080 B.16X40 LW.16 B.M18x115 LN.18 NAME & DESCRIPTION ROTOR,WELDMENT HAMMER BEARING SEAT SEAL 70x100x10 BEARING 512 CIRCLIP 110 SEAL 60x110x10 PULLEY TAPER LOCK 04-5080 BOLT M16x40 LOCK WASHER 16 BOLT M18x115 LOCK NUT M18 QTY. 1 1 1 1 1 1 20 18 16 14 12 12 2 2 2 2 2 1 1 8 8 20 20 MODEL D220 D200 D180 D160 D140 D120 D220 D200 D180 D160 D140 D120 ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART No. D220.021 D200.021 D180.021 D160.021 D140.021 D120.021 D220.020 D220.022 D220.112 S.48X62X8 GBT 281-94 2208K NAME & DESCRIPTION ROLLER,WELDMENT LEFT SUPPORT,WELDMENT RIGHT SUPPORT,WELDMENT SEAT FOR SEAL SEAL 48x62x8 BEARING 2208K GB3452.1-82.5x88x3.55 O-SEAL 82.5x88x3.55 C.40 EXTERNAL CIRCLIP 40 C.88 INTERNAL CIRCLIP 88 D220.113 SCRAPER D200.113 D180.113 D160.113 D140.113 D120.113 B.14X40 BOLT M14x40 LN.14 LOCK NUT M14 GZ.10X1 ZERK M10x1 B.16X50 BOLT M16×50 LN.16 LOCK NUT M16 W.16 PLAIN WASHER 16 QTY. 1 1 1 1 1 1 1 1 2 2 2 MODEL 2 2 2 1 D220 1 D200 1 D180 1 D160 1 D140 1 D120 2 2 2 4 4 4 ITEM 1 2 3 4 5 6 7 PART No. D220.040 D180.040 D120.040 JB/ZQ4454-014 BH5.60.109 D220.041 FT-R-1-2-M14x1.5 KJ-R1-2-M LN.18 NAME & DESCRIPTION CYLINDER GASKET 14 JOINT 14-14 HOSE ADPTER 14-R1/2 QTY. 1 1 1 2 2 2 2 MODEL D220,D200 D180,D160,D140 D120 QUICK-CONNECTER R1/2-MALE 2 LOCK NUT M18 2 FARMER-HELPER Limited Warranty Unless otherwise stated on purchase invoice, Betstco warrants to original Purchaser that Farmer-Helper products are free from major deffects in material under normal use and service for a period of 90 Days from the date the product is purchased or shipped, whichever is later. Commercial use 90 days. Use at address that is not yours, is considered commercial use. Consumable, Expendalble, Wear Items (Rubber plastic parts, hydraulic hoses, belts, tires, cables, blades, tines, wedges, teeth, tiups, chains, pins, brushes, filters, etc) and cracked hydraulic pumps, bent or broken cylinder rods are not covered under this warranty. Warranty does not cover items that have been modified, damaged by abuse or usage not in accordance with design or maintenance. Betstco obligation under this warranty is to repair or replace defective upon approval by; Betstco, 83371 Melton Rd. N, Creswell OR 97426 that Warranty Claim is valid. Product shall be returned upon request of Betstco. Transportation charges to be prepaid by user. Gasoline or diesel engines used to powered Farmer-Helper products are covered by the warranty of the appropriate engine manufacturean Purchaser must look to the engine manufacture for all issues relating to engine operation. Betstco assumes no responsibility for outside labor. PERMISSABLE BY APPLICABLE LAW, BETSTCO HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, ANY IMPLIED WARRANTIES WITH RESPECT TO THE PRODUCT PURCHASED, WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, BETSTCO HEREBY EXPRESSLY DISCLAIMS ALL LIABILITY FOR PRODUCT DEFECT OR FAILURE, CLAIMS THAT ARE DUE TO NORMAL WEAR, PRODUCT MISUSE, ABUSE, PRODUCT MODIFICATION, IMPROPER PRODUCT SELECTION, NON-COMPLIANCE WITH ANY CODES, OR MISAPPROPRIATION. BETSTCO MAKES NO WARRANTIES TO THOSE DEFINED AS "CONSUMERS" IN THE MAGNUSON-MOSS WARRANTY FEDERAL TRADE COMMISION IMPROVEMENTS ACT. THE FOREGOING EXCLUSION OF IMPLIED WARRANTIES DO NOT APPLY TO THE EXTENT PROHIBITED BY LAW. PLEASE REFER TO YOUR LOCAL LAWS FOR ANY SUCH PROHIBITIONS. THERE SHALL BE NO LIABILITY FOR PRODUCT LIABILITY OR LIABILITY ON THE PART OF BETSTCO FOR ANY GENERAL SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE SALE OR USE OF ANY PRODUCTS SOLD BY BETSTCO OR AN AGENT THEREOF, BETSTCO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS OF THE PRODUCTS FOR ANY PURPOSE) WITH RESPECT TO THE PRODUCTS COVERED BY THIS AGREEMENT EXCEPT AS IN THIS PARAGRAPH OTHERWISE EXPRESSLY PROVIDED. THIS IS THE SOLE AND ONLY WARRANTY OF VALUE-LEADER PRODUCTS, NO OTHER WARRANTY IS APPLICABLE, EITHE EXPRESSED OR IMPLIED, IN FACT BY LAW. This warranty shall not be interpreted to render Betstco, or any authorized agent liable for injury or damages of any kind or nature, direct, consequential, or contingent, to a person or property. The sole and only remedy in regard to any defective product shall be the repair or replacement thereof as herein provided, Betstco, agent(s) of Betstco shall not be liable for any consequential, special, incidental or punitive damages resulting from or caused by any such defects Betstco reserves the rights to make improvements in design or changes in specifacations at any time, without incurring any obligations to owners of the units previously sold. WARRANTY VOID IF REGISTRATION IS NOT RECEIVED OR RECORDED ONLINE WITHIN 30 DAYS OF PURCHASE DATE OR SHIP DATE, WHICHEVER IS LATER. ITEM: PURCHASED FROM: OWNER NAME: OWNER ADDRESS: CITY: PHONE: MODEL# PURCHASE DATE: GIFT INV# ORDER# SERIAL # COUNTY: EMAIL: ST: ZIP: ACCEPTANCE OF RESPONSIBILITY: I (PURCHASER) HAVE READ OPERATORS MANUAL AND LIMITED WARRANTY OR SOMEONE HAS READ/AND EXPLAINED ALL INSTRUCTIONS TO ME. I UNDERSTAND THIS WARRANTY DOES NOT COVER ANY LABOR AND THAT ALL DISPUTES WILL BE SETTLED BY BINDING ARBITRATION. BINDING ARBITRATION IS CONDUCTED BY THE BETTER BUSINESS BUREAU (BBB) LOCATED AT 4004 SW KRUSE WAY PLACE ST 375 LAKE OSWEGO OR 97035 OR THE CURRENT BBB LOCATION CLOSEST TO BETSTCO. I ACKNOWLEDGE MY LIMITED WARRANTY IS VOID IF ANY ATTEMPT TO REPAIR OR REPLACE DEFECTIVE PARTS HAS BEEN MADE BY UNAUTHORIZED PERSONNEL.I ACKNOWLEDGE RECEIPT OF MY OPERATORS MANUAL AND HAVE READ THE SAFE OPERATION SECTION. I ACKNOWLEDGE UNDERSTANDING MAINTENANCE AND SAFE OPERATION REQUIREMENTS, ITEM SPECIFACATIONS, OPERATION, CONTROLS AND STORAGE REQUIRMENTS. I UNDERSTAND THAT IS ALONE AM RESPONSIBLE FOR PROPER MAINTENANCE, CARE AND SAFE OPERATIONOF THIS FARMER-HELPER ITEM I (PURCHASER) AGREE THAT PERSONS NOT FAMILIAR WITH THE OPERATION OF THIS ITEM SHOULD NOT BE ALLOWED TO USE IT. CHILDREN ESPECIALLY SHOULD NOT OPERATE OR BE NEAR POWER PRODUCTS WHEN IN USE. ANYONE OPERATING VALUE-LEADER PRODUCTS SHOULD HAVE READ OPERATIONS MANUALS AND SAFTEY MANUALS. OWNERS SIGNATURE: x DATE: YOU MUST SIGN THIS WARRANTY AND MAIL OR FAX A COPY TO BETSTCO, 83371 MELTON RD, CRESWELL OR, 97426. IF YOU PREFER YOU MAY COMPLETE YOUR REGISTRATION ONLINE AT https://betstco.com/product-registration/. THIS WARRANTY IS NOT EFFECTIVE UNLESS PURCHASER COMPLETE REGISTRATION AND WARRANTY FOR WITHIN 30 DAYS OF PURCHASE OR SHIP DATE WHICHEVER IS LATER. NOTE: WE MAY REFUSE WARRANTY OF ANY KIND UNLESS BETSTCO, RECEIVES A COMPLETED, LEGIBLE AND SIGNED WARRANTY REGISTRATION. IT IS THE RESPONSIBILITY OF THE PURCHASER TO ASSURE THAT REGISTRATION DOCUMENT IS RECIEVED BY 1 YEAR EXTENDED WARRANTY & REGISTRATION FARMER-HELPER IMPLEMENTS BRANDED PRODUCTS 1 YEAR EXTENDED WARRANTY 1 Year Extended Warranty amends to original Recorded Warranty Registration the time period of described coverage. Extended Warranty does not apply to consumable and Expendable Item as described in Product Warranty Registration. This amendment does not affect any other part of recorded Warranty Registration or policy. No one is authorized to alter, modify, or enlarge this Amendment to original recorded Warranty Registration EXTENDED REGISTRATION & PAYMENT MUST BE RECEIVED WITHIN 30 DAYS OF PURCHASE DATE EXTENDED WARRANTY REGISTRATION PRODUCT & MODEL # SERIAL # OWNER NAME : BETSTCO INVOICE # ACCEPTANCE OF RESPONSIBILITY: I (PURCHASER) HAVE READ AND UNDERSTAND THE EXTENDED WARRANTY OR SOMEONE HAS READ AND EXPLAINED ALL THE ABOVE TO ME. I UNDERSTAND THIS EXTENDED WARRANTY DOES NOT COVER ANY LABOR. I HAVE FILED MY ORIGINAL WARRANTY REGISTRATION AND FULLY UNDERSTAND MY REQUIREMENTS. I UNDERSTAND THAT I ALONE AM RESPONSIBLE FOR PROPER MAINTENANCE, CARE AND SAFE OPERATION OF THIS TRACTOR IMPLEMENT. OWNERS SIGNATURE: x FAX TO 1-541-895-2756 DATE: YOU MUST SIGN THIS WARRANTY AND MAIL OR FAX A COPY TO BETSTCO, 83371 MELTON RD, CRESWELL OR. IF YOU PREFER YOU MAY COMPLETE YOUR REGISTRATION ONLINE AT https://betstco.com/product-registration/. THIS WARRANTY IS NOT EFFECTIVE UNLESS PURCHASER COMPLETE REGISTRATION AND WARRANTY FOR WITHIN 30 DAYS OF PURCHASE OR SHIP DATE WHICHEVER IS LATER. NOTE: WE MAY REFUSE WARRANTY OF ANY KIND UNLESS BETSTCO, RECEIVES A COMPLETED, LEGIBLE AND SIGNED WARRANTY REGISTRATION. IT IS THE RESPONSIBILITY OF THE PURCHASER TO ASSURE THAT REGISTRATION DOCUMENT IS RECIEVED BY