Joie Litetrax™/ Litetrax™ Pro/ Litetrax™ Pro Air/ Mytrax™ Pro Adapter

Important Safety Warnings

• ⚠️ Adult assembly required.
• ⚠️ Ensure that all locking devices are engaged before use.
• ⚠️ Do not let your child play with this product.
• ⚠️ Never use it along with component parts from other manufacturers.
• ⚠️ Please read all instructions in the manual before using the product. Save for future reference. Failure to follow warnings may result in serious injury or death.
• ⚠️ Keep away from high temperature objects, liquids, and electronics.
• ⚠️ Discontinue using the adapter if it is damaged or broken.
• ⚠️ To avoid suffocation, remove plastic bag and packaging materials before use. Keep packaging away from babies and children.
• ⚠️ For infant restraints used with a chassis, this does not replace a cot or bed. If your child needs to sleep, place them in a suitable pram body, cot, or bed.
• ⚠️ Check that the pram body or child restraint attachment devices are correctly engaged before use.

How to Use with Infant Child Restraint or Carry Cot

Refer to images 1 - 10 for visual guidance.

1. Position the adapter near the stroller frame.
2. Push the adapter down onto the stroller frame until it clicks into place. You should hear a distinct "CLICK" sound.
3. Lower the approved Joie infant car seat or Joie carry cot onto the attached adapters.
4. Ensure the infant car seat or carry cot is securely attached to the stroller via the adapters.
5. (Diagram shows downward pressure and hand symbol) Apply firm, even pressure to secure the attachment.
6. (Diagram shows carry cot being attached) The adapters are designed to securely hold compatible carry cots.
7. (Diagram shows carry cot fully attached) The carry cot is now safely connected to the stroller.
8. (Diagram shows arrows indicating lifting points) To detach, lift the infant car seat or carry cot using the designated release points.
9. (Diagram shows close-up of release mechanism) Operate the release mechanism as shown.
10. (Diagram shows red X over an incorrect attachment) ❌ Do not use if the attachment is not secure or appears incorrect.

Compatibility: Use these adapters only with the litetrax™, litetrax™ pro, litetrax™ pro air, or mytrax™ pro stroller to attach approved Joie infant car seats (Gemm, i-Gemm 3, i-Level Recline, i-Snug 2) or Joie carry cot (Ramble & Ramble XL).

⚠️ Please do not fold the stroller when the infant child restraint or carry cot is still attached.

Care and Maintenance

• To clean the adapter frame, use only household soap and warm water.
• Excessive exposure to sun or heat could cause fading or warping of parts.