Farelek BERMUDES Ceiling Fan

Product Information

Model: BERMUDES

Brand: Farelek

Manufacturer: FAR GROUP EUROPE

Part Number: 112423

Serial Number: J42004-XY-1L

Specifications

• Power: 50 W
• Voltage/Frequency: 230V ~ 50Hz
• Max Bulb Wattage: E14, 60W (x1)
• Fan Speed: 130-190-240 min⁻¹
• Diameter: 107 cm

Contents of the Box

The package contains the following parts:

• 01: Mounting bracket and hardware
• 02: Canopy cover
• 03: Ceiling mounting hardware
• 04: Motor housing
• 05: Light kit cover
• 06: Fan blades
• 07: Pull chains

Assembly Instructions

Section A: Machine Parts Description

Diagram showing the different parts of the ceiling fan labeled 01 through 07.

Section C: Contents of Carton

Diagram illustrating all the components included in the box, with quantities indicated:

• 01: x2
• 02: x1
• 03: x1
• 04: x1
• 05: x1
• 06: x4
• 07: x2

Section D: Assembling the Machine

Step-by-step visual guide for assembling the ceiling fan. This includes mounting the bracket to the ceiling, attaching the motor housing, and connecting the fan blades.

Step 1: Mount the bracket (01) to the ceiling. Ensure it is securely fastened.

Step 2: Attach the motor housing (04) to the mounting bracket.

Step 3: Secure the fan blades (06) to the motor housing using screws (03). Ensure all blades are attached correctly.

Step 4: Install the light kit cover (05).

Step 5: Wiring the fan. Follow the diagram carefully, ensuring all connections are secure. Pay attention to the ON/OFF switch and electrical safety warnings.

Step 6: Install the light bulbs (E14, max 60W).

Step 7: Attach the canopy cover (02).

Step 8: Final assembly of the light kit and fan blades.

Ceiling Mounting Options:

The manual illustrates mounting the fan on different ceiling types:

• Wood: Requires appropriate screws for wood.
• Metal: Requires appropriate screws for metal.
• Concrete: Requires appropriate anchors and screws for concrete.

Electrical Connection:

Diagram showing the wiring connections, including live (L), neutral (N), and ground wires. Ensure the power is switched OFF before making any connections.

Diagrams:

• Illustrations show the correct orientation for attaching the fan blades to the motor.
• A diagram demonstrates how to connect the wires, including a push-in connector system.

Functions of the Machine

Section E: Functions of the Machine

Operation Modes:

• The fan can operate in two modes, indicated by icons:
• Summer Mode (Sun icon): Circulates air downwards for cooling effect.
• Winter Mode (Snowflake icon): Circulates air upwards to distribute warm air.

Remote Control:

The fan comes with a remote control for convenient operation. Functions include fan speed adjustment and light control.

Features:

• Remote control for full appliance control.
• Light regulator.
• Fan speed settings.

Technical Data

• Nominal Power: 45.5 W
• Maximum Fan Flow Rate: 116.71 m³/min
• Service Value: 2.56 (m³/min)/W
• Standby Power Consumption: 0 W
• Fan Sound Power Level: 48.6 dB (A)
• Maximum Air Velocity: 2.04 meters/min
• Seasonal Electricity Consumption: 16.509 kWh/a
• Measurement Standard: IEC 60879:1986

Safety Information

• Read all instructions before use.
• Danger: Follow all safety warnings and precautions.
• Ensure the fan is installed correctly to avoid hazards.
• Do not operate the fan if any part is damaged.
• Keep away from water and moisture.
• Ensure proper ventilation.

Declaration of Conformity

This product complies with CE directives and standards. The product has been tested and meets the requirements of relevant European directives, including:

• 2014/30/EU, 2014/35/EU, 2011/65/EU, 2015/863/EU
• EN IEC 55014-1:2021
• EN IEC 55014-2:2021
• EN IEC 61000-3-2:2019+A1:2021
• EN61000-3-3:2013+A1:2019+A2:2021
• EN60335-1:2012+A11+A13+A14+A1+A2+A15
• EN60335-2-80:2003+A1+A2
• EN62233:2008
• EN IEC 60598-2-1:2021
• EN IEC 60598-1:2021+A11:2022
• EN62493:2015
• 2009/125/EC
• EN 50564:2011
• EN 60704-1:2010+A11:2012
• EN 60704-2-7:2020
• EN IEC 60879:2019
• Commission Regulation (EU) No.206/2012 + (EU) No.2016/2282

Warranty

This tool is guaranteed against any manufacturing or material defects for 1 year from the date of purchase, upon presentation of the sales receipt. The warranty covers the replacement of faulty parts. It does not cover damage caused by improper use, unauthorized repairs, or negligence. The warranty does not apply to damage caused by tool failure.

After Sales Service

For after-sales service, please contact FAR GROUP EUROPE:

FAR GROUP EUROPE
192, Avenue Yves Farge
37700 St. Pierre-des-Corps
FRANCE
Email: fargroup@fargroup.net

Visit fartools.com for more information.

Recycling Information

Dispose of tools, accessories, and packaging responsibly according to local environmental regulations. Follow the directives for waste electrical and electronic equipment.