PlayBeatz Wireless Earbuds

Product Overview

Diagram showing the PlayBeatz earbuds and charging case:

• Earbud Components: ① Protective Mesh, ② Multi-function Sensor, ③ Charging Terminals, ④ Type-C Charging Port.
• Accessories: ⑤ Charging Cable.

The charging case features a Type-C charging port and a status button.

Important Safety Information

This device contains small parts and must be kept away from children. Only use the device for its intended purpose.

Important Instructions Before Use

• Do not place earbuds under heavy pressure. Keep away from extreme heat and wet environments.
• Keep away from Wi-Fi routers or other high frequency transmitting devices to prevent loss of signal.
• PlayBeatz work best within their working range (10 meters / 33 feet). The signal quality is best if there are no obstacles between the PlayBeatz and your device.

How to Pair

1. Pairing with One Earbud

Press and hold the multi-function sensor on the earbud until the LED flashes red and blue alternately (5 seconds). Turn on Bluetooth on your device and select "PlayBeatz" from the list. When connected, you will hear a voice on the earbud saying "Connected". You can now make phone calls and enjoy your music.

2. Pairing with Two Earbuds

A. Press and hold the multi-function sensor on both earbuds simultaneously until the LEDs flash red and blue alternately (5 seconds).

B. Press any of the sensors for 2 seconds. You will hear a "beep" sound to notify you when the device is ready to pair. As long as one of the LED lights is off, they will pair successfully.

C. Turn on the Bluetooth on your device and select "PlayBeatz" from the list to connect. When connected, you will hear a voice on the earbuds saying "Connected". The earphone's battery status will be displayed on your cell phone.

Note: Both earbuds will work during a phone call, and both multi-function sensors will work to control Power/Play/Pause functions. PlayBeatz will attempt to connect to previously-synced devices automatically when turned on.

Bluetooth Usage

1. Making Phone Calls

Ensure the earbuds are paired with your cell phone. When there is an incoming call, the incoming caller's number will be broadcast. Tap one of the multi-function sensors once to answer. To refuse a call, long-press a multi-function sensor. When the earbuds are in music mode, quickly press the multi-functional sensor twice to adjust volume (left earbud for volume down, right earbud for volume up).

2. Listening to Music

Once paired, listen to music as usual. Press a multi-function sensor once to pause or play.

3. Powering Off

Press and hold a multi-function sensor until a red LED appears, and Bluetooth will turn off. The earbuds will automatically power off when disconnected from your Bluetooth device for over 5 minutes. The earbuds will not turn off when placed in the charging case unless the charging case button is pressed or the earbuds are turned off manually.

4. Charging the Earbuds

A voice reminder and flashing red LED indicate low battery. Place your earbuds into the charging case, tap the button on the case, and the charging case LED will light up blue. The earbud LEDs will glow red while charging and turn blue when fully charged.

5. Charging the Case

Press the button on the case to check the battery level; a red LED indicates low battery. While charging, the LED will flash red and turn solid red when fully charged.

Additional Functions

• Holding a multi-function sensor activates your device's Voice Assistance.
• Pressing a multi-function sensor 3 times skips to the previous/next song (left earbud for previous, right earbud for next).

Specifications

• Bluetooth Version: V5.0+EDR
• Bluetooth Mode: A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.
• Bluetooth Frequency: 2.4 GHz
• Bluetooth Range: 10 meters / 33 Feet with no obstacles
• Battery Capacity: Earbuds: 35mAh rechargeable Li-ion Battery; Charging Dock: 250mAh
• Standby Time: 72 hours
• Talk/Play Time: Over 3 Hours

Package Includes

• 2 x Earbuds
• Charging Case
• Charging Cable
• Instruction Manual

Compliance and Disposal

The device complies with the European Directives 2014/53/EU. At the end of its service life, this product must not be disposed of in normal household waste but rather at a collection point for recycling electrical and electronic devices. The materials are recyclable according to their labeling. You make an important contribution to protecting our environment by reusing, recycling, or utilizing old devices in other ways. Please ask the municipal administration where the appropriate disposal facility is located.

Subject to change.