Ryobi R18MT 18V Cordless Multi-tool and RB18L50 Battery Pack User Manual

Product Overview

This document provides instructions for the Ryobi R18MT 18V Cordless Multi-tool and the Ryobi RB18L50 18V Lithium-ion Battery Pack. It covers essential safety information, operating procedures, maintenance, and specifications for both products.

Ryobi R18MT 18V Cordless Multi-tool

Intended Use: The multi-tool is designed for adults who have read and understood the manual. It is intended for sanding and finishing metal, wood, plastics, or similar materials; scraping and plunge-cutting into non-ferrous metal, wood, plastics, plasterboard, etc.; and cutting holes in walls for switches or power sockets. It should be operated indoors in dry, well-illuminated, and ventilated conditions, and not on wet surfaces.

Know Your Product

The Ryobi R18MT features the following components:

• 1. Blade clamp
• 2. Blade lock/release lever
• 3. Head angle adjusting release button
• 4. Speed control
• 5. On/off switch
• 6. Lock on switch
• 7. Plunge cut blade (example accessory)
• 8. Grout blade (example accessory)
• 9. Sanding pad (example accessory)
• 10. Sandpaper (example accessory)
• 11. Adapter (for use with other brands' accessories)
• 12. Battery port
• 13. Dust port
• 14. Depth gauge

Accessories: Various accessories are available for different applications, including cutting blades, sanding pads, and sandpaper. An adapter is provided to allow compatibility with accessories from other brands like RYOBI, RIDGID, or AEG.

Operation

Accessory Attachment: To attach accessories, unlock the blade clamp, insert the accessory, and then lock the clamp. The head angle can be adjusted between 0° and 90° using the release button.

Speed Control: Adjust the speed using the speed control dial (4) for different tasks.

Using the Depth Gauge: The depth gauge (14) helps set the cutting depth or prevent over-cutting.

Dust Extraction: Connect a vacuum cleaner to the dust port (13) to remove dust during operation, which helps prevent respiratory irritation and keeps the work area clean.

Securing Workpieces: Always secure workpieces with a clamp to prevent movement during operation. Do not hold the workpiece by hand.

Cutting Techniques: When making plunge cuts, gradually bring the vibrating blade to the workpiece. For non-ferrous metals, take extra care as the blade may skip; drilling pilot holes along the cut line may be helpful.

Overcurrent Protection: The tool will automatically switch off if overcurrent is detected. Release and re-apply the trigger to resume operation.

Maintenance

General: Clean the tool with dry cloths. Avoid using solvents on plastic parts as they can cause damage. Do not allow dust from plaster or wallboard to enter the motor area; use dust extraction and clean with a brush and vacuum.

Lubrication: Bearings are pre-lubricated for the product's lifespan under normal conditions; no further lubrication is required.

Repairs: All repairs should be performed by an authorized Ryobi service center using only identical replacement parts.

Safety Warning: Never connect the product to a power supply when assembling, adjusting, cleaning, performing maintenance, or when not in use. Disconnecting prevents accidental starting.

Hot Accessories: Metallic accessories can become hot during use; wear gloves when changing them.

Ryobi RB18L50 18V Lithium-ion Battery Pack

Battery Protection Features: Ryobi ONE+ 18V lithium-ion battery packs are equipped with features to monitor and protect cells, maximizing battery life. The tool may stop to prevent overheating or overloading; release the trigger to reset. If the tool does not reactivate, the battery may be discharged and needs charging. Batteries can be recharged in any state; complete discharge is not necessary.

LED Charge Indicator: The LED indicator may not function if the battery protection feature has stopped the tool (sleep mode).

SHUT-OFF Mode: Minimizes self-discharge when not in use, reactivated by tool use or pressing the LED gauge.

Cold Weather Operation: Battery packs can be used down to -10°C. Light duty use can help warm the battery for normal operation.

Charging the Battery Pack:

• Charge battery packs prior to first use.
• Use only compatible 18V chargers.
• Ensure battery contacts align with charger contacts and latches secure the pack.
• Charging may cause slight warmth, which is normal.
• Avoid charging in extreme heat or cold; normal room temperature is best.
• Place the charger on a hard surface.
• A minimum of 1 hour charging is required for a normal usage recharge.

Charging a Hot Battery Pack: Allow hot battery packs to cool before attempting to recharge.

Charging a Cool Battery Pack: If the battery is below normal temperature, the red LED flashes, and the green LED is off. Charging begins automatically when the battery reaches above 0°C.

Charge Status: Press the charge level indicator button to display the amount of charge left. Indicators show charge levels from 0-10% (one bar) to 75-100% (four bars).

Maintenance: Do not disassemble battery packs. Handling batteries, especially with jewelry, can cause burns. For longest life, remove the battery from the charger once fully charged.

Storage: For storage longer than 30 days, store battery packs at temperatures below 27°C, in a charged condition (30%-50% charged). After six months, discharge to 10%-20% before recharging to maximize battery lifetime.

Environmental Protection: Recycle raw materials. Cover battery terminals with tape upon removal. Do not attempt to disassemble or destroy batteries; they must be recycled or disposed of properly. Keep away from children.

Product Specifications

18V Multi-tool (R18MT)

• Model: R18MT
• Voltage: 18 V
• No Load Speed: 10000 - 20000 min⁻¹
• Oscillation Angle: 3.2°

Battery and Charger Compatibility

* for vehicles with 12V DC outlets

Safety Warnings Summary

General Safety: Always read and follow all safety warnings and instructions to prevent electric shock, fire, or serious injury. Keep the work area clean and well-lit. Do not operate in explosive atmospheres. Keep children and bystanders away.

Electrical Safety: Use correct plugs and outlets. Avoid contact with earthed surfaces. Do not expose tools to rain or wet conditions. Do not abuse the cord. Use outdoor extension cords and RCDs in damp locations.

Personal Safety: Stay alert and use common sense. Wear appropriate personal protective equipment (eye protection, dust mask, etc.). Prevent unintentional starting by ensuring switches are off before connecting power or battery. Remove adjustment keys before operation. Maintain proper footing and balance. Do not wear loose clothing or jewelry.

Battery Safety: Keep batteries away from metal objects. Do not expose batteries to fire or heat. Do not crush, drop, or damage battery packs. Batteries can explode if exposed to ignition sources. Do not charge in damp locations. Charge within specified temperature ranges (10°C - 37°C).

Residual Risks: Be aware of hazards from dust (use dust extraction, wear protection), noise and vibration (wear ear protection, take breaks), and risk of electrocution (hold by insulated handles).

Signal Words:

• DANGER: Imminent hazard, death or serious injury.
• WARNING: Potentially hazardous situation, death or serious injury.
• CAUTION: Potentially hazardous situation, minor or moderate injury.
• CAUTION (no symbol): Property damage.

Environmental Protection

Recycle raw materials instead of disposing of as waste. Ensure machines, accessories, and packaging are sorted for environmentally friendly recycling. Check with local authorities for recycling advice.

Company Information

Imported by:

Techtronic Industries (Australia) Pty. Ltd.
31 Gilby Road,
Mt Waverley, VIC 3149, Australia

Techtronic Industries New Zealand Ltd.
2 Landing Drive, Auckland Airport,
Mangere, New Zealand 2022