Outsunny 841-153 Series Storage Bench
Model Numbers: 841-153V01, 841-153V70, 841-153V02
Maximum Load Capacity: 300 kg ⚖️
Estimated Assembly Time: 60 MIN ?
Introduction
Thank you for purchasing this product. To ensure your garden bench serves you well, please read all instructions in this user manual carefully. If you have any questions, please contact the customer care center.
Usage Tips
- Place the bench stably on a flat floor for optimal performance.
- Install the bench in a sheltered location, away from direct weather.
- Keep away from open flames.
- Do not hang anything on the structure.
- Avoid overloading the bench beyond its weight capacity.
- It is advised not to sit on the bench during storms.
- Do not use in adverse weather conditions and cover the furniture when not in use.
Precautions Before Assembly
- Prepare a clean and dry assembly area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
- Caution: Be aware of the risks of pinching or cuts during assembly.
Maintenance and Storage
Maintenance
- Clean with a soft fabric.
- Regularly remove leaves and/or water collected on the fabric.
- Check the bench regularly for any signs of wear or looseness.
- Do not use this product if the seat fabric, cushion, or tarpaulins are ageing. Contact customer service.
Storage Conditions
- When not in use, the furniture should be stored completely dry in a clean and dry place to avoid the risks of mold.
- Cover furniture when not in use.
Assembly Instructions
Parts List
Part | Description | Quantity |
---|---|---|
A | Main storage box base | 1 |
B | Lid | 1 |
C | Front panel | 1 |
D | Side panel | 1 |
E | Internal grate/support | 1 |
F | Cushion | 1 |
G | Hinge pin | 2 |
H | Screw M6*35 | 8 |
I | Washer | 16 |
J | Screw M6*30 | 8 |
K | Support block/foot | 1 |
L | Allen key | 1 |
Step 1: Assemble the Base Structure
Diagram shows the main box base (A) with the internal grate (E) being placed inside. Side panels (D) and the front panel (C) are shown ready to be attached to the base. Screws (H, J) and washers (I) are indicated for connection points.
Step 2: Attach the Lid
Diagram shows the lid (B) being attached to the main box assembly. Screws (H, J) and washers (I) are indicated for the hinge attachment points.
Step 3: Install Hinges and Supports
Diagram shows hinge pins (G) being inserted into the lid hinges. Support blocks (K) are shown being attached to the base structure.
Step 4: Final Assembly
The final image shows the assembled storage bench with the cushion (F) placed on top. The assembly is marked as 'Done'.
Customer Contact Information
Country | Phone | |
---|---|---|
UK | 0044-800-240-4004 | enquiries@mhstar.co.uk |
DE | 0049-0(40)-88307530 | service@aosom.de |
FR | 0033-1-84166106 | aosom@mhfrance.fr |
ES & PT | 0034-931294512 | atencioncliente@aosom.es |
IT | 0039-0249471447 | clienti@aosom.it |
US | 001-877-644-9366 | customerservice@aosom.com |
CA | 416-792-6088 | customerservice@aosom.ca |
Importer Information
US Importer: Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. Made in China.
CA Importer / Importateur: Aosom Canada Inc., 1251 Tapscott Road, Unit 101, Scarborough, Ontario Canada M1X 1S9. Made in China. / Importé par Aosom Canada Inc., 1251 Rue Tapscott, Unité 101, Scarborough, Ontario Canada M1X 1S9. Fabriqué en Chine.
UK Importer: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. Made in China.
FR Importateur: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. Fabriqué en Chine. Includes recycling information: "Pensez à donner ou recycler. ♻️" with link https://quefairedemesdechets.fr.
ES Importador Por: SPANISH AOSOM, S.L., C/ ROC GROS, N° 15. 08550, ELS HOSTALETS DE BALENYÀ, SPAIN. B66295775. WWW.AOSOM.ES, ATENCIONCLIENTE@AOSOM.ES, TEL: 931294512. Hecho en China.
DE Importeur: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. In China hergestellt.
IT Importato da: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). P.I.: 08567220960. Fatto in Cina.