DFI RPP051 2.5" Pico-ITX Single Board Computer

Overview

The DFI RPP051 is a compact 2.5" Pico-ITX Single Board Computer (SBC) designed for demanding embedded applications. It leverages the power of 13th Gen Intel® Core™ Processors, offering high performance and efficiency.

The board features a robust set of I/O and expansion capabilities, making it suitable for a wide range of industrial and embedded computing solutions.

Key Features

Processor: 13th Gen Intel® Core™ Processors
Memory: 1 DDR5 SO-DIMM slot supporting up to 32GB at 4800MHz
Graphics: Intel® UHD Graphics with support for 4K/2K resolution and Dual Independent Displays (DP++ + eDP)
Expansion: Multiple expansion options including M.2 E key and M.2 B key slots for storage and 5G/LTE modules.
I/O: Rich I/O including Intel 2.5G LAN, COM ports, USB 3.2 Gen 2, USB 2.0, SMBus, DIO, and SPI.

Detailed Specifications

System

Processors: 13th Generation Intel® Core™ Embedded Processors (i7-1365UE, i5-1345UE, i3-1315UE, U300E) and Industrial Processors (Extended Temp variants)
Memory: One 262-pin SODIMM slot, Single Channel DDR5 up to 4800MHz
BIOS: AMI SPI 256Mbit

Graphics

Controller: Intel® UHD Graphics
Features: DirectX12, Open GL 4.6, Vulkan 1.2, HW Decode/Encode support
Display: 1 x DP++, 1 x eDP. DP++ supports up to 4096x2304 @ 60Hz, eDP supports up to 4096x2160 @120Hz. Supports Dual Displays via DP++ + eDP.

Expansion

Interface: 1 x M.2 E key 2230 (PCIe x1/USB 2.0), 1 x M.2 B key 3042/2242 for storage (PCIe x2/USB 2.0/SATA 3.0), 1 x M.2 B key 3042/2242 for 5G/LTE module (PCIe x1/USB 3.2 Gen1/SATA 3.0) with Nano SIM slot.

Audio

Audio Codec: Realtek ALC888S-VD2-GR

Ethernet

Controller: 1 x Intel® I225-IT (supports iAMT for Core i7/i5 models)
Speed: 1 x 2.5GbE (RJ-45)

Rear I/O

2 x USB 3.2 Gen 2
1 x DP++
1 x eDP

Internal I/O

Serial: 1 x RS-232/422/485 (1.27mm pitch)
USB: 2 x USB 2.0 (1.27mm pitch)
Display: 1 x eDP Connector
Audio: 1 x Line-out/Mic-in (1.27mm pitch)
DIO: 1 x 8-bit DIO (1.00mm pitch)
SMBus: 1 x SMBus (1.00mm pitch)

Watchdog Timer

Output & Interval: System Reset, Programmable via Software from 1 to 255 Seconds

Security

TPM: fTPM2.0

Power

Type: Single 12V +/-10% DC
Connector: 2-pin Terminal Block
Consumption: Typical: 1365UE: 12V @ 0.7A (8.4Watt), Max.: 1365UE: 12V @ 5.58A (66.96Watt)
RTC Battery: CR2032 Coin Cell

OS Support (UEFI Only)

OS: Windows 10 IoT Enterprise (64-bit), Windows 11, Linux

Environment

Temperature: Operating: -5 to 65°C, Storage: -40 to 85°C
Humidity: Operating: 5 to 90% RH, Storage: 5 to 90% RH
MTBF: Calculation model: Telcordia Issue 4

Mechanism

Dimensions: 2.5" Pico-ITX Form Factor, 100mm (3.94") x 72mm (2.83")
Height: PCB: 1.6 mm, Top Side: 16.34 mm, Bottom Side: 9.47 mm

Standards and Certifications

Certifications: CE, FCC Class B, RoHS, UKCA, KC

Ordering Information

Model Name	P/N	Processor	Memory	Display	GbE	RS-232/422/485	USB 3.2 Gen2	USB 2.0	Power	Thermal Temp.
RPP051-BTD-1365UE	770-RPP0511-000G	i7-1365UE	1 DDR5 SO-DIMM	DP++, eDP	1	1	2	2	12VDC Fanless	-5 to 65°C
RPP051-BTD-1345UE	770-RPP0511-100G	i5-1345UE								-5 to 65°C
RPP051-BTD-1315UE	770-RPP0511-200G	i3-1315UE								-5 to 65°C
RPP051-BTD-U300E	770-RPP0511-300G	U300E								-5 to 65°C
RPP051-ETD-U300E	770-RPP0511-700G	U300E								-30 to 80°C
RPP051-TCD-1365URE	770-RPP0511-800G	i7-1365URE	1 DDR5 SO-DIMM	DP++, eDP	1	1	2	2	12VDC Fanless	-40 to 85°C
RPP051-TCD-1345URE	770-RPP0511-900G	i5-1345URE								-40 to 85°C
RPP051-TCD-1315URE	770-RPP0511-A00G	i3-1315URE								-40 to 85°C

Packing List

1 RPP051 board
Heat sink for -5 to 65°C (Height: 37.8mm)
Heat sink for -30 to 80°C, -40 to 85°C (Height: 37.8mm)
*Note: Thermal solution will change to heat spreader as the product goes to mass production.

Optional Items

Power adapter (60W, 12V, DC Jack)
2 pole terminal to DC Jack cable
USB 2.0 cable (Length: 200mm, 2 ports)
COM cable (Length: 300mm, 1 port)
DIO cable (Length: 200mm)
SMBus cable (Length: 200mm)
Audio cable (Length: 160mm)
Front Panel cable (Length: 200mm)
Heat spreader (Height: 11mm)

	DFI RPP968 COM Express Compact: 13th Gen Intel Processor DFI's RPP968 COM Express Compact board features 13th Gen Intel Processors, supporting up to 64GB DDR5 memory, 4K resolution, multiple displays, and extensive expansion options including PCIe and SATA.
	DFI RPS183 Mini-ITX Industrial Motherboard User's Manual Comprehensive user's manual for the DFI RPS183 Mini-ITX Industrial Motherboard, detailing specifications, hardware installation, and BIOS settings for Intel LGA 1700 processors.
	DFI WM130-RPS Wallmount Desktop Box IPC - 14th/13th/12th Gen Intel Core Processors DFI WM130-RPS is a compact wallmount desktop box IPC supporting 14th, 13th, and 12th Gen Intel Core processors. Features include rich I/O, PCIe slot expansion, WiFi 6, and multiple storage options.
	DFI ADP253 Embedded 4" SBC User's Manual Comprehensive user manual for the DFI ADP253 Embedded 4" SBC, detailing hardware installation, BIOS settings, specifications, and safety precautions.
	DFI ADP253 12th Gen Intel Core 4-Inch SBC Technical Specifications Detailed technical specifications for the DFI ADP253, a 4-inch Single Board Computer (SBC) featuring 12th Gen Intel Core processors. Includes information on processor options, memory, graphics, expansion, I/O, power, environmental specifications, and ordering information.
	DFI EC531-KH/EC532-KH: 7th Gen Intel Core Embedded System Datasheet Comprehensive datasheet for DFI's EC531-KH and EC532-KH fanless embedded systems, featuring 7th Gen Intel Core processors, extensive I/O, and rugged design for industrial applications. Includes detailed specifications, ordering information, and mounting guides.
	DFI EC531/EC532-SD: 6th/7th Gen Intel Core Modular Embedded System Explore the DFI EC531/EC532-SD, a robust modular-designed embedded system powered by 6th/7th Gen Intel Core processors. This datasheet details its features, specifications, and connectivity options, including support for up to 32GB DDR4, multiple independent displays, extensive I/O, and expansion slots.
	DFI EC510-KH/EC511-KH: 7th Gen Intel Core Modular Embedded System DFI's EC510-KH/EC511-KH is a rugged, fanless embedded system powered by 7th Gen Intel Core processors. It supports up to 64GB DDR4 RAM, triple independent displays, and offers extensive I/O options including multiple COM ports, USB 3.0, GbE LAN, and PoE. Ideal for industrial applications with wide temperature and voltage support.