KUBIK Modular Shelving Unit Assembly Instructions

Product Overview

This document provides assembly instructions for the KUBIK modular shelving unit.

Included Components:

• Panels (various types labeled A, B, C, D)
• Connectors E (x16)
• Connectors F (x24)
• Connectors G (x8)

Note: Wall mounting hardware (screws, washers, plugs) is not included and must be purchased separately, suited to your wall type.

Assembly Steps

1. Step 1: Initial Panel Connection

   Join two panels (A) together along their edges. Use a mallet ? to gently tap the connection points to secure them. This step is performed twice (x2).

   [Diagram Description: Two flat panels are shown being joined at an edge, with a mallet striking the joint.]

2. Step 2: Forming the Base Structure

   Connect panels (A) and (B) using the circular connectors (E, F, G). The diagrams illustrate how these connectors fit into pre-drilled holes to create the cell structure.

   [Diagram Description: Several panels are shown being connected at right angles and in a circular manner using small connecting pieces. Circular insets show the mechanism of the connectors.]

3. Step 3: Expanding the Structure

   Continue adding panels (A, B, C, D) and connectors to build the modular grid, expanding the unit outwards and upwards as desired.

   [Diagram Description: The structure is shown growing with more panels and connectors being added, forming multiple interconnected cells.]

4. Step 4: Mid-Assembly View

   A 3x3 grid of interconnected cells is depicted, showcasing the modular and expandable nature of the KUBIK system.

   [Diagram Description: A top-down view of a 3x3 grid of cube-like compartments.]

5. Step 5: Adding Internal Supports

   Insert internal support pieces (E, F) into the structure. These pieces likely function as horizontal and vertical dividers within the cells to add rigidity.

   [Diagram Description: A frame-like structure is shown with horizontal and vertical bars being inserted into slots within the cells.]

6. Step 6: Final Assembly

   Complete the assembly of the modular shelving unit by attaching the final panels and connectors. Ensure all connections are secure.

   [Diagram Description: The fully assembled modular shelving unit is depicted, showing multiple interconnected compartments. A close-up view highlights the final connection points.]

Important Safety Information

WARNING: Risk of Toppling

To avoid any risk of toppling, this furniture item/object must be securely attached to the wall. Check the suitability and the strength of the wall to ensure that the wall can bear the load of the furniture/object and withstand the forces put on the securing elements. Improper installation can result in the furniture/object falling and cause serious injuries to people.

In case of doubt regarding the installation, ask for advice from a specialised sales assistant or contact a professional.

Wall Mounting Recommendations

Use screws, washers, and plugs suited to the type of material of your wall. These are not included with the product. To obtain advice on the screws and fittings best suited to your wall, ask a specialised sales assistant.

This safety information is provided in multiple languages (French, Spanish, Portuguese, English, Italian) for user convenience.