LIEBHERR RBc5220 Tall Larder Fridge User Guide

User Guide for LIEBHERR models including: RBc5220 Tall Larder Fridge, RBc5220, Tall Larder Fridge, Larder Fridge, Fridge

View Product Manual

Liebherr RBc5220 Tall Larder Fridge, White, C Rated | Marks Electrical

File Info : application/pdf, 30 Pages, 5.37MB

User Guide
Quality, Design and Innovation
home.liebherr.com/fridge-manuals

Contents

Device information...................................................16

Appliance at a glance............................................ 3

1.1 Scope of delivery.......................................................... 3

1.2 Overview of the appliance and features.................. 3

1.3 SmartDevice.................................................................. 3

1.4 Appliance range of use............................................... 4

1.5 Conformity..................................................................... 4

1.6 SVHC substances according to REACH regulation. 4

1.7 EPREL database........................................................... 4

2 General safety instructions.................................. 4

Software.................................................................... 16 Reminder.................................................................... 16 Demo mode............................................................... 16 Resetting to factory settings................................. 17

Functionality of the Touch display....................... 6 7.3 Fault messages............................................................ 17

3.1 Navigation and symbol explanation......................... 6 7.3.1

Warnings..................................................................... 17

3.2 Menus............................................................................. 6

3.3 Sleep mode................................................................... 7 8

Features................................................................. 18

8.1 4-star freezer compartment*..................................... 18

Putting into operation........................................... 7 8.2 Door rack....................................................................... 18

4.1 Switching on appliance (first use)............................ 7 8.3 Shelves.......................................................................... 18

5 5.1 5.2 5.3

Storage.................................................................. Information regarding storage................................... Fridge compartment.................................................... BioFresh.........................................................................

7 7 8 8

8.4 8.5 8.6 8.7

Dividing shelf................................................................ 19 VarioSafe *.................................................................... 19 Adjustable bottle shelf................................................ 21 Drawers.......................................................................... 22

5.4 5.5

****-freezer compartment*........................................ Storage times...............................................................

8 8

8.8 8.9 8.10

Fruit & Vegetable safe cover...................................... 22 Adjusting the moisture levels.................................... 23 Bottle holder................................................................. 23

Saving energy........................................................ 9 9

Maintenance.......................................................... 23

Controls................................................................. 9 9.1 FreshAir carbon filter................................................... 23

7.1 Controls and displays.................................................. 9 9.2 Disassembling / assembling pull-out systems...... 24

7.1.1

Status display..............................................................9 9.3 Defrosting the appliance............................................ 24

7.1.2

Display symbols.......................................................... 9 9.4 Defrosting the freezer compartment manually*.... 24

7.2 Appliance functions..................................................... 10 9.5 Cleaning the appliance............................................... 24

7.2.1

Notes on the appliance functions..........................10 Switching the appliance off and on......................10

10 10.1

Customer help....................................................... 25 Technical specifications............................................. 25

10.2 Operating noises.......................................................... 25 WiFi............................................................................ 10 10.3 Technical fault.............................................................. 26

10.4 Customer Service......................................................... 27

Temperature............................................................... 11 10.5 Model plate................................................................... 27

11 Shutting down....................................................... 27

Temperature unit......................................................12 12 Disposal................................................................. 27

12.1 Preparing appliance for disposal.............................. 27

BioFresh B-Value ..................................................... 12

12.2

Disposing of the appliance in an environmentally friendly manner............................................................ 28

C-Value*..................................................................... 12 D-Value.......................................................................12

The manufacturer is continually working on the further development of all types and models. Please be aware that we reserve the right to make changes to the shape, equip- ment and technology.

SuperCool.................................................................. 12 Symbol HolidayMode............................................................. 13 SabbathMode............................................................13

Explanation
Read instructions Please read the information in these instruc- tions carefully to understand all of the benefits of your new appliance.

E-Saver ......................................................................14

CleaningMode........................................................... 14

Display brightness................................................... 15

Door alarm.................................................................15

Input lock...................................................................15

* Depending on model and options

Appliance at a glance

Symbol

Explanation
Additional information on the Internet
The digital manual with additional informa- tion and in other languages can be found via the QR code on the front of the manual or by entering the service number at home.liebherr.com/fridge-manuals.
The service number can be found on the serial tag:

1.2 Overview of the appliance and features

Fig. Example illustration

Check appliance
Check all parts for transport damage. If you have any complaints, please contact your agent or customer service.

Differences
These instructions apply to a range of models, so differences are possible. Sections that apply to certain models only are marked with an asterisk (*).

Instructions and results Instructions are marked with a . Results are marked with a .

Videos
Videos about the appliances are available on the YouTube channels of Liebherr-Hausgeräte.

These operating instructions apply to:

RB.. / SRB.. 5220 / 5221

52Vc20

1 Appliance at a glance
1.1 Scope of delivery
Check all parts for transport damage. Contact your dealer or customer service in the event of complaints. (see 10.4 Customer Service)
Your new appliance comes with the following parts: - Standalone appliance - Features (depending on the model) - Installation materials (depending on the model) - "Quick Start Guide" - "Installation Guide" - Service Brochure

Fig. 1 Example illustration

Temperature range

(A) Fridge compartment

(B) BioFresh

(D) 4-star freezer compart-

ment*

Features

(1) Controls

(8) Fruit & Vegetable-Safe

(2) Glass plate for 4-star (9) Outlet

freezer compartment*

(3) Fan with FreshAiracti- (10) Serial tag

vated charcoal filter

(4) Separable storage

(11) Meat & Dairy-Safe

shelf

(5) Storage shelf

(12) Bottle rack

(6) Integrated bottle shelf (13) Bottle holder

(7) Lid for Fruit & Vege-

(14) Can rack

table-Safe

Note u Shelves, drawers and baskets are arranged for optimum
energy efficiency when the appliance is delivered. Changing how the shelves, for example, are inserted in the fridge compartment does not have any impact on energy consumption.

1.3 SmartDevice
SmartDevice is the networking solution for your refrigerator.
If your appliance SmartDevice-enabled or compatible, you can quickly and easily connect your appliance to your WiFi. With the SmartDevice app, you can operate your appli- ance from a mobile device. Additional functions and setting options are available in the SmartDevice SmartDevice app.

* Depending on model and options

General safety instructions

SmartDevice-

Your appliance is compatible for use

compatible appli- with the SmartDeviceBox. You must

ance:

first purchase and install the Smart-

DeviceBox. In order to connect your

appliance to the WiFi, you need to

download the SmartDevice app.

Misusing the appliance may lead to damage to the goods stored or they may spoil.
Climate classifications
Depending on the climate classification the appliance is designed to operate in restricted ambient temperatures. The climate classifica- tion applying to your appliance is printed on the rating plate.

More information smartdevice.liebherr.com about SmartDe- vice:
Purchasing the home.liebherr.com/shop/de/deu/ SmartDeviceBox smartdevicebox.html in the LiebherrHausgeräte store:
Downloading the SmartDevice app:

Note uKeep to the specified ambient tempera-
tures in order to guarantee that the appli- ance works properly.

Climate clas- for ambient temperatures of sification

10 °C to 32 °C

16 °C to 32 °C

16 °C to 38 °C

16 °C to 43 °C

After installing and configuring the SmartDevice, you can connect your appliance to the WiFi using the SmartDevice app and the WiFi appli- ance function (see WiFi) .

SN-ST SN-T

10 °C to 38 °C 10 °C to 43 °C

1.5 Conformity

Note The SmartDevice function is not available in the following countries: Russia, Belarus, Kazakhstan. You cannot use the SmartDeviceBox.
1.4 Appliance range of use

The refrigerant circuit has been tested for leaks. The appli- ance complies with the applicable safety regulations and with the corresponding directives.
The full text of the EU Declaration of Conformity is available on the following website: www.Liebherr.com
The BioFresh compartment meets the requirements of a cold storage compartment as set out in DIN EN 62552:2020.

Intended use
The appliance is only suitable for cooling food products in a domestic or household-like environment. This includes, for example, use:
- in staff kitchens, bed and breakfast estab- lishments,
- by guests in country houses, hotels, motels and other accommodation,
- for catering and similar services in the wholesale trade.
The appliance is not suitable for freezing food;*
The appliance is not suitable as a built-in unit.
All other types of use are not permitted.
Foreseeable misuse
The following applications are expressly forbidden:
- Storing and refrigerating medicines, blood plasma, laboratory preparations or similar substances and products based on the Medical Device Directive 2007/47/EC
- Use in areas at risk of explosions

1.6 SVHC substances according to REACH regulation
You can check whether your appliance contains SVHC substances according to REACH regulation at the following link: home.liebherr.com/de/deu/de/liebherr-erleben/nach- haltigkeit/umwelt/scip/scip.html
1.7 EPREL database
Details about energy labelling and ecodesign requirements will be available on the European product database (EPREL) from 1st March 2021. You can access the product database at the following link: https://eprel.ec.europa.eu/ You will be asked to enter the model ID. You can find the model ID on the nameplate.
2 General safety instructions
Please keep these operating instructions in a safe place so you can refer back to them at any time. If you pass the appliance on, please hand these operating instructions to the next user. Read these operating instructions carefully before use to ensure safe and correct use of the appliance. Follow the instructions, safety

* Depending on model and options

General safety instructions

instructions and warning messages included at all times. They are important for ensuring you can operate and install the appliance safely and without any problems.
Danger for the user:
- This device can be used by children and people with impaired physical, sensory or mental abilities or with a lack of experi- ence and knowledge provided that they are supervised or have received instruction in the safe use of this device, and about the resulting hazards. Children must not play with this appliance. Cleaning and user maintenance work must not be carried out by children without adult supervision. Chil- dren aged between 3 and 8 are allowed to load and unload the appliance. Children below the age of 3 must be kept away from the appliance unless they are under contin- uous adult supervision.
- The socket must be easily accessible so that the appliance can be disconnected quickly from the electricity in an emer- gency. It must not be located in the area behind the appliance.
- When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.
- In the event of a fault pull out the mains plug or deactivate the fuse.
- Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable.
- Only customer service or other specially trained staff may repair or perform other operations on the appliance.
- Only assemble, connect and dispose of the appliance according to the instructions.
Fire hazard:
- The coolant used (information on the model plate) is ecofriendly but also flammable. Any leaking coolant may ignite.
· Do not damage the refrigerant circuit pipes.
· Do not handle ignition sources inside the appliance.
· Do not use electrical appliances inside the appliance (e.g. steam cleaners, heaters, ice cream makers, etc.).
· If the refrigerant leaks: remove any naked flames or ignition sources from the vicinity of the leakage point. Properly air the room. Inform customer services.
- Do not store explosives or sprays using combustible propellants such as butane,

propane, pentane, etc. in the appliance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components. - Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appli- ance on fire. - Please be sure to store alcoholic drinks or other packaging containing alcohol in tightly closed containers. Any alcohol that leaks out may be ignited by electrical components.
Danger of tipping and falling:
- Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.
Danger of food poisoning:
- Do not consume food which has been stored too long.
Danger of frostbite, numbness and pain:
- Avoid prolonged skin contact with cold surfaces or refrigerated/frozen goods or take protective measures, e.g wear gloves.
Danger of injury and damage:
- Hot steam can lead to injury. Do not use electrical heating or steam cleaning equip- ment, open flames or defrosting sprays to defrost.
- Do not use sharp implements to remove the ice.
Risk of crushing:
- Do not hold the hinge when opening and closing the door. Fingers may get caught.
Symbols on the appliance:
This symbol may be located on the compressor. It relates to the oil in the compressor and makes reference to the risk that: Swallowing or inhaling can be fatal. This advice is only relevant to recy- cling. There is no danger in normal opera- tion.
This symbol is located on the compressor and indicates the danger of flammable materials. Do not remove the sticker.
This or a similar sticker may be located on the rear of the appliance. This sticker indicates that there are vacuum insulation panels (VIP) or perlite panels in the door and/or housing. This advice is only relevant to recycling. Do not remove the sticker.
Please note the warning messages and other specific advice in the other chapters:

* Depending on model and options

Functionality of the Touch display

DANGER WARNING CAUTION NOTICE Note

indicates

immediately

hazardous situation which will

lead to death or serious injuries if

it is not avoided.

indicates a hazardous situation which may lead to death or serious injuries if it is not avoided.

indicates a hazardous situation which may lead to minor or moderate injuries if it is not avoided.

indicates a hazardous situation which may lead to damage to property if it is not avoided.

indicates useful instructions and tips.

3 Functionality of the Touch
display
You operate your appliance using the Touch display. You select appliance functions in the Touch display (hereafter referred to as display) by tapping them. If you do not perform any action on the display for 10 seconds, the display either jumps back to the higher-level menu or directly to the status display.

3.1 Navigation and symbol explanation

In the illustrations, different symbols are used to navigate the display. The following table describes these symbols.

Symbol

Description
Press the Next navigation arrow: Navigates to the next option in the menu.

Press the Back navigation arrow:
Jumps back one option in the menu.

Press the navigation arrow several times in succession:
Navigates in the menu to the desired function.

Press the Confirm symbol: Activates/deactivates function. Opens submenu.

Press the Confirm symbol together with the back icon:
Jumps back one menu level.

Symbol

Description

Arrow with a time indication:
It takes the specified amount of time until the following message appears in the display.

"Open Settings menu" symbol:
Navigates to the Settings menu and opens the settings menu.
If necessary: Navigate to the desired function in the Settings menu.
(see 3.2.1 Opening the Settings menu)

"Open Advanced menu" symbol:
Navigates to the Advanced menu and opens the advanced menu.
If necessary: Navigate to the desired function in the Advanced menu.
(see 3.2.2 Opening the Advanced menu)

action

10 seconds

for If you do not perform any action on the display for 10 seconds, the display either jumps back to the higher-level menu or directly to the status display.

Opening door closing it again

and If you open the door and immedi- ately close it again, the display jumps directly back to the status display.

Note: Illustrations of the display are shown in the English version.

3.2 Menus

The appliance functions can be found in various menus.

Menu Main menu
Settings menu Advanced menu

Description
When you switch the appliance on, you are automatically in the main menu. From here you can navigate to the most important appliance functions, to the Settings menu and to the Advanced menu.
The Settings menu contains additional appliance functions for setting up your appliance. (see 3.2.1 Opening the Settings menu)
The advanced menu contains special appli- ance functions for setting up your appli- ance. Access to the Advanced menu is protected by the numerical code 1 5 1. (see 3.2.2 Opening the Advanced menu)

3.2.1 Opening the Settings menu

Arrow with clock:
It takes more than 10 seconds for the following message to appear in the display.

* Depending on model and options

Fig. 2 Example illustration u Carry out action steps according to the illustration. w Settings menu is open. u If necessary: Navigate to the desired function.
3.2.2 Opening the Advanced menu

Putting into operation

Fig. 3

Fig. 5 Example illustration w The status display appears. w The appliance cools to the temperature set at the factory. w The appliance starts in demo mode (status display with
DEMO appears): If the appliance starts in demo mode, you can deactivate demo mode within the next 5 minutes. (see Demo mode)
More information:
- Start the SmartDevice for the first time. (see 1.3 Smart- Device) and (see WiFi)

Note The manufacturer recommends: u Stock with food: Wait for around 6 hours until the set
temperature is reached. u Store frozen foods at -18 °C or colder.* u Observe the notes on storing food. (see 5.1 Information
regarding storage)

Fig. 4 Example illustration, access with numerical code 151 u Carry out action steps according to the illustration. w The expanded menu is open. u If necessary: Navigate to the desired function.

Note Accessories can be purchased from the LiebherrHausgeräte store at home.liebherr.com/shop/de/deu/ zubehor.html.

3.3 Sleep mode
If you do not touch the display for 1 minute, the display switches to sleep mode. In sleep mode, the display bright- ness is dimmed.

5 Storage
5.1 Information regarding storage

3.3.1 Ending sleep mode
u Press any navigation key. w Sleep mode is ended.
4 Putting into operation
4.1 Switching on appliance (first use)
Make sure that the following requirements are fulfilled: q The appliance has been installed and connected in
accordance with the installation instructions. q All adhesive strips, adhesive and protective films and
transport locks are removed from inside and on the appli- ance. q All marketing leaflets are removed from the drawers. q You are familiar with the functionality of the Touch display. (see 3 Functionality of the Touch display) Switch on the appliance using the Touch display: u If the display is in sleep mode: Briefly touch the display. u Carry out action steps according to the illustration.

WARNING Risk of fire u Do not use any electrical appliances in the food area of
the appliance unless recommended by the manufacturer.
Note The energy consumption increases and the cooling power goes down if ventilation is not sufficient. u Always keep air slots clear.
Observe the following specifications for storage:
- Keep the air vents on the inside of the rear wall free. - Keep the air vents on the fan free. - In the freezer compartment: Package food properly.* - Package or cover foods that readily take on or give off
odours or taste in closed containers. - Package raw meat or fish in clean, closed containers.
This will prevent meat or fish from touching or dripping onto other food. - Keep liquids in closed containers. - Leave space between goods to ensure good air circula- tion. - Store food according to the instructions on the pack- aging. - Always observe the best-before date indicated on the packaging.

* Depending on model and options

Storage

Note Failure to follow these guidelines can lead to foodstuffs spoiling.
5.2 Fridge compartment

To ensure that food quickly freezes through, adhere to the following quantities per package: - Fruit and vegetables up to 1 kg - Meat up to 2.5 kg
Arranging your food properly

The air circulation in the appliance creates different temper- ature zones. You will find the different temperature zones in the appliance and equipment overview. (see 1.2 Overview of the appliance and features)
5.2.1 Arranging your food properly
u Upper area and door: Store butter, cheese, tinned food and tubes.
u Coldest temperature zone: Store perishable foods such as pre-cooked meals.

CAUTION Risk of injury due to broken glass! Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks. u Do not freeze bottles and cans containing drinks!
u Place packaged food in the freezer compartment in such a way that it is in contact with the bottom or sides.
Defrosting food

5.3 BioFresh
BioFresh will extend the storage time for some fresh foods compared to traditional refrigeration.
Note If the temperature drops below 0 °C foods may freeze. u Store cold-sensitive produce such as cucumbers, auber-
gines, courgettes and tropical fruit in the fridge compart- ment.
5.3.1 Fruit & Vegetable safe
This safe creates a storage climate of close to 0 °C. The tight lid ensures constant levels of humidity. This storage climate is suitable for storing unpackaged food with high intrinsic moisture (for example, lettuce, vegetables, fruit). The humidity in the compartment depends on the moisture content of the chilled goods placed in it, and also depends on how often the compartment is opened. You can regulate the humidity level. (see 8.9 Adjusting the moisture levels)
Arranging your food properly u Store unpackaged fruit and vegetables.
If the humidity is too high: u Regulate the humidity. (see 8.9 Adjusting the moisture
levels)
5.3.2 Meat & Dairy safe
This safe creates a storage climate of close to 0 °C. This storage climate is suitable for more sensitive foods (e.g. dairy products, meat, fish, sausage).
Arranging your food properly u Store dry or packaged food.
5.4 ****-freezer compartment*
Here, a dry, frosty storage climate is created at -18 °C. The frosty storage climate is suitable for storing frozen food for several months, for making ice cubes or freezing fresh food. The air temperature in the freezer compartment, measured with a thermometer or other measuring device, may fluc- tuate. Temperature fluctuations are greater in a half-full or empty freezer and it is possible to attain temperatures warmer than -18 °C.
5.4.1 Freezing food
The maximum amount of fresh food that you can freeze within 24 hours is specified on the type plate (see 10.5 Model plate) under "Freezing capacity ... kg/24h".

WARNING Risk of food poisoning! u Do not re-freeze thawed food. u Use defrosted foodstuff as soon as possible.
You can defrost food in several ways:
- In the fridge compartment - In the microwave - In the oven/fan-assisted oven - At room temperature u Take out only as much food as necessary.

5.5 Storage times
Refer to the specified storage times as a guide. In the case of foods with a minimum shelf life, the date indicated on the packaging still applies.

5.5.1 Fridge section
Always follow the best-before date stated on the packaging.

5.5.2 BioFresh

Recommended storage periods in the Meat & Dairy-Safe

Butter

at 1 °C

up to 90 days

Hard cheese

at 1 °C

up to 110 days

Milk

at 1 °C

up to 12 days

Sausage, cold meats at 1 °C

up to 8 days

Poultry

at 1 °C

up to 6 days

Pork

at 1 °C

up to 6 days

Beef

at 1 °C

up to 6 days

Game

at 1 °C

up to 6 days

Note u Remember that high-protein foods perish quicker; shell-
fish and crustaceans do not last as long as fish, and fish does not last as long as meat.

Recommended storage periods in the Fruit & VegetableSafe

Vegetables, salads

Artichokes

at 1 °C

up to 14 days

Celery

at 1 °C

up to 28 days

* Depending on model and options

Saving energy

Recommended storage periods in the Fruit & VegetableSafe

Cauliflower

at 1 °C

up to 21 days

Broccoli

at 1 °C

up to 13 days

Chicory

at 1 °C

up to 27 days

Lettuce

at 1 °C

up to 19 days

Peas

at 1 °C

up to 14 days

Kale

at 1 °C

up to 14 days

Carrots

at 1 °C

up to 80 days

Garlic

at 1 °C

up to 160 days

Turnip

at 1 °C

up to 14 days

Lettuce

at 1 °C

up to 13 days

Herbs

at 1 °C

up to 13 days

Leeks

at 1 °C

up to 29 days

Mushrooms

at 1 °C

up to 7 days

Radishes

at 1 °C

up to 10 days

Brussels sprouts

at 1 °C

up to 20 days

Asparagus

at 1 °C

up to 18 days

Spinach

at 1 °C

up to 13 days

Savoy

at 1 °C

up to 20 days

Fruit

Apricots

at 1 °C

up to 13 days

Apples

at 1 °C

up to 80 days

Pears

at 1 °C

up to 55 days

Blackberries

at 1 °C

up to 3 days

Dates

at 1 °C

up to 180 days

Strawberries

at 1 °C

up to 7 days

Figs

at 1 °C

up to 7 days

Blueberries

at 1 °C

up to 9 days

Raspberries

at 1 °C

up to 3 days

Currants

at 1 °C

up to 7 days

Sweet cherries

at 1 °C

up to 14 days

Kiwis

at 1 °C

up to 80 days

Peaches

at 1 °C

up to 13 days

Plums

at 1 °C

up to 20 days

Cranberries

at 1 °C

up to 60 days

Rhubarb

at 1 °C

up to 13 days

Gooseberries

at 1 °C

up to 13 days

Grapes

at 1 °C

up to 29 days

5.5.3 Freezer compartment*

Recommended shelf-lives for various types of food

Ice cream

at -18 °C 2 to 6 months

Cold cuts, ham

at -18 °C 2 to 3 months

Bread, baked goods at -18 °C 2 to 6 months

Game, pork

at -18 °C 6 to 9 months

Recommended shelf-lives for various types of food

Fatty fish

at -18 °C 2 to 6 months

Lean fish

at -18 °C 6 to 8 months

Cheese

at -18 °C 2 to 6 months

Poultry, beef

at -18 °C 6 to 12 months

Vegetables, fruit

at -18 °C 6 to 12 months

6 Saving energy
- Pay attention to good ventilation. Do not cover ventilation holes or grids.
- Always keep the fan air slits clear. - Do not place the appliance in direct sunlight or near radi-
ators or similar sources of heat. - If the appliance is placed directly next to an oven,
the energy consumption may increase slightly. This is dependent on the service life and usage intensity of the oven. - Energy consumption depends on the installation condi- tions, e.g. the ambient temperature (see 1.4 Appliance range of use) . A warmer ambient temperature can increase the energy consumption. - Open the appliance for as short a time as possible. - The lower the temperature is set the higher the energy consumption. - Sort your food: home.liebherr.com/food. - Keep all food properly packed and covered. This prevents frost from forming. - Only take food out for as long as necessary so that it doesn't warm up too much. - Inserting warm food: allow to cool down to room temper- ature first. - Thaw frozen food in the refrigerator.* - If there is a thick layer of frost in the appliance: defrost the appliance.* - For longer periods of absence, use HolidayMode (see HolidayMode) .
7 Controls
7.1 Controls and displays
7.1.1 Status display

Fig. 6 (1) Temperature display of the fridge section
The Status display shows the set temperature and is the home display. From there, you can navigate to the options and settings.
7.1.2 Display symbols
Display symbols provide information on the current appli- ance status:

* Depending on model and options

Controls

Symbol

Appliance status
Standby The appliance or temperature zone is switched off.
Flashing number Appliance is working. Temperature flashes until the set value is reached.
Flashing symbol Appliance is working. Setting is made.
Bar grows steadily Function is activated.

7.2 Appliance functions

Fig. 9 Example illustration u Carry out action steps according to the illustration.
When the appliance starts in demo mode: u Deactivating demo mode. (see Deactivating demo mode) w The appliance is switched on. w Previous settings are restored. w The appliance cools to the target temperature set.

7.2.1 Notes on the appliance functions
The appliance functions are set at the factory so that your appliance is fully functional.
Before you alter, activate or deactivate the device functions, make sure that the following requirements are met: q You have read and understood the descriptions of how
the display works. (see 3 Functionality of the Touch display) q You have familiarised yourself with the operating and display elements of your appliance.
Switching the appliance off and on
Use this function to switch the entire appliance off and on.
Switching off the appliance When you switch the appliance off, then the previously saved settings are saved.
Make sure that the following requirements are fulfilled: q Handling instructions (see 11 Shutting down) are carried
out.

WiFi
Use this function to connect your appliance to WiFi. You can then operate it via the SmartDevice app on a mobile device. You can also use this function to disconnect or reset the WiFi connection. To connect your device to WiFi, you need the SmartDevi- ceBox. More information on the SmartDevice: (see 1.3 SmartDevice)
Note The SmartDevice function is not available in the following countries: Russia, Belarus, Kazakhstan. You cannot use the SmartDeviceBox.
Establishing the WiFi connection for the first time
Make sure that the following requirements are fulfilled: q You have purchased and inserted a SmartDeviceBox.
(see 1.3 SmartDevice) q You have installed the SmartDevice app (see
apps.home.liebherr.com). q Registration in the SmartDevice app is completed.

Fig. 7

Fig. 10

Fig. 8 u Carry out action steps according to the illustration. w Appliance is switched off. w The standby symbol appears in the display. w Display turns black. Switching on the appliance
If the display is in sleep mode: u Press any navigation key.
10

Fig. 11 u Carry out action steps according to the illustration. w Connection is established.
* Depending on model and options

Disconnecting from the WiFi Fig. 12

Controls

Fig. 13 u Carry out action steps according to the illustration. w There is no connection. Resetting the WiFi connection
Fig. 14

Fig. 17 u Carry out action steps according to the illustration.

Temperature
Use this function to set the temperature.
The temperature depends on the following factors: - How often the door is opened - How long the door is open for - The room temperature of the installation site - The type, temperature and amount of food

Temperature zone

Recommended setting

Fridge compart- 4 °C ment

BioFresh

(see Setting the temperature in the BioFresh)

Setting the temperature in the fridge compartment

Fig. 15 u Carry out action steps according to the illustration. w WiFi connection and other WiFi settings are reset to
factory settings.
Showing information about the WiFi connection

Fig. 16

Fig. 18 u Carry out action steps according to the illustration. w Temperature is set.
Setting the temperature in the BioFresh
You can set the temperature using the BioFresh B-Value in the customer menu.

* Depending on model and options

Controls

Temperature unit
Use this function to set the temperature unit. You can set degrees Celsius or degrees Fahrenheit as the temperature unit.
Setting the temperature unit

w The BioFresh B-Value is set.
C-Value*
Use this function to set the C-Value. You can use the CValue to make the **** freezer compartment slightly warmer or colder. The C-Value is pre-set to value C5 as delivered.

Fig. 19

Value Description

C1 to C4 **** freezer compartment gets colder.

Pre-set value

C6 to C9 **** freezer compartment gets warmer.

Setting the C-Value

Fig. 23

Fig. 20 Example illustration: Switch from degrees Celsius
to degrees Fahrenheit. u Carry out action steps according to the illustration. w The temperature unit is set.

BioFresh B-Value

Use this function to set the BioFresh B-Value. With the BioFresh B-Value, you can set BioFresh slightly warmer or colder if necessary due to higher or lower ambient temper- atures. The BioFresh B-Value is pre-set to value B5 as deliv- ered. If you change the B-Value, refer to the following table:

Fig. 24 Example illustration: Switch from C5 to C6. u Carry out action steps according to the illustration. w The C-Value is set.

Value Description

D-Value

B1 Lowest temperature
B1-B4 The temperature can drop below 0 °C which means foods can easily freeze.

The D-Value is pre-set for your appliance and is not permitted to be changed.

B5 Pre-set temperature B9 Highest temperature Setting the BioFresh B-Value
Fig. 21

SuperCool
You can use this function to activate or deactivate Super- Cool. If SuperCool is activated, then the appliance increases the cooling capacity. It allows you to achieve lower cooling temperatures. You can activate SuperCool when you would like to cool a large quantity of food quickly.
If SuperCool is activated, then lower temperatures are reached in the **** freezer compartment. You can activate SuperCool when you would like to freeze food in the **** freezer compartment.*
If the function is active, the appliance operates at higher power. As a result, the appliance's operating noise may be temporarily louder and energy consumption will increase.

Activating SuperCool
Time for activation of the function:
- When you would like to store fresh food in the fridge section: Activate the function when inserting food.
- When you would like to store fresh food in the **** freezer compartment: Activate function 3 hours before inserting the food.*

Fig. 22 Example illustration: Switch from B5 to B6. u Carry out action steps according to the illustration.

* Depending on model and options

Controls

Fig. 25

Fig. 30 u Carry out action steps according to the illustration. w HolidayMode is activated. w Temperature display shows HolidayMode symbol.
Deactivating HolidayMode

Fig. 26 u Carry out action steps according to the illustration. w SuperCool is activated.
Deactivating SuperCool
SuperCool is deactivated automatically after 18 hours. However, you can also deactivate SuperCool manually at any time:

Fig. 31

Fig. 27

Fig. 32 u Carry out action steps according to the illustration. w HolidayMode is deactivated. w The appliance cools to the temperature set previously.

SabbathMode

Fig. 28 u Carry out action steps according to the illustration. w SuperCool is deactivated. w The appliance continues to run in normal mode. w The appliance cools to the temperature set previously.

You can use this function to activate or deactivate SabbathMode. If you activate this function, some electronic functions are switched off. As a result, your device meets the religious requirements for Jewish holidays such as Sabbath and complies with STAR-K Kosher certification.
Device status when SabbathMode is active

HolidayMode
You can use this function to activate or deactivate Holiday- Mode. If you activate HolidayMode, the fridge section is set to 15 °C. This saves you energy during longer periods of absence and prevents bad odours and growth of mould.

The status display shows SabbathMode permanently.
All functions on the display are locked except for the Deactivate SabbathMode function.
Active functions remain active.
The display remains bright when you close the door.

Appliance status when HolidayMode is active Fridge section cools to 15 °C. BioFresh cools to 15 °C. The set temperature is maintained in the **** freezer compartment.* SuperCool is deactivated. PowerCool is deactivated.
Activating HolidayMode u Empty the fridge section completely. u Empty BioFresh completely.

The interior lighting is deactivated.
Reminders are not implemented. The set time interval stops.
Reminders and warnings are not displayed.
There is no door alarm.
There is no temperature alarm.
The defrosting cycle operates only for the specified time, without considering the device consumption.
After a power failure, the device returns to SabbathMode. Device status
Note This appliance has certification from the "Institute for Science and Halacha". (www.machonhalacha.co.il) You can find a list of STAR-K-certified appliances at www.star-k.org/appliances.

Fig. 29

* Depending on model and options

Controls
Activating SabbathMode

Activating E-Saver

WARNING Danger of food poisoning from spoiled food! If you have SabbathMode activated and a power failure occurs, no message appears in the status display about the power failure. Once the power is restored, the appliance continues to operate in SabbathMode. The power failure may mean that food spoils and the consumption of this food could lead to food poisoning. After a power failure: u Do not consume food that was frozen and has thawed
out.

Fig. 36

Fig. 33

Fig. 37 u Carry out action steps according to the illustration. w Energy saving mode is activated.
Deactivating E-Saver

Fig. 34 u Carry out action steps according to the illustration. w SabbathMode is activated. w The status display shows SabbathMode permanently.
Deactivating SabbathMode
The SabbathMode is automatically deactivated after 80 hours. However, you can also deactivate SabbathMode manually at any time:

Fig. 38
Fig. 39 u Carry out action steps according to the illustration. w Energy saving mode is deactivated.

CleaningMode

Fig. 35 u Carry out action steps according to the illustration. w SabbathMode is deactivated.
E-Saver

You can use this function to activate or deactivate Cleaning- Mode. CleaningMode enables the appliance to be cleaned conveniently.
This setting applies to the fridge section.
Application:
- Clean the fridge section. (see 9.5 Cleaning the appliance) - Clean the Water & Ice Center.

You can use this function to activate or deactivate Energy saving mode. If energy saving mode is activated, the energy consumption decreases and the temperature in the device increases. The food remains fresh, but the shelf life is short- ened.

Temperature zone

Recommended Temperature with

setting

active E-Saver

(see Tempera-

ture)

4 °C

7 °C

Fridge section Temperatures

Device status when CleaningMode is active The status display shows CleaningMode permanently. The fridge section is switched off. Interior lighting is activated. The reminders and warnings are not displayed. No signal tone sounds. The Water & Ice Center is locked. The Water & Ice Center MoodLight is activated. The recessed grip MoodLight is deactivated. Device status

Activating CleaningMode

* Depending on model and options

Fig. 40

The following values can be set: - 1 minute - 2 minutes - 3 minutes - Off
Setting the door alarm

Fig. 41 u Carry out action steps according to the illustration. w CleaningMode is activated. w The status display shows CleaningMode permanently.
Deactivating CleaningMode
CleaningMode is deactivated automatically after 60 minutes. However, you can also deactivate Cleaning- Mode manually at any time:

Fig. 45

Controls

Fig. 42 u Carry out action steps according to the illustration. w CleaningMode is deactivated. w The appliance cools to the temperature set previously.
Display brightness
Use this function to set the display brightness in stages. You can select the following brightness levels: - 40 % - 60 % - 80 % - 100 % (pre-setting) Setting the display brightness

Fig. 46 Example illustration: Change door alarm from 1 minute to 3 minutes. u Carry out action steps according to the illustration. w The door alarm is set. Deactivating the door alarm
Fig. 48

Fig. 43

Fig. 49 u Carry out action steps according to the illustration. w The door alarm is deactivated.

Input lock

Fig. 44 Example illustration: Switch from 80 % to 60 %. u Carry out action steps according to the illustration. w The display brightness is set.
Door alarm
Use this function to activate or deactivate the door alarm. The door alarm sounds if the door is open for too long. The door alarm is activated on delivery. You can set how long the door may be open before the door alarm sounds.

You can use this function to activate or deactivate the input lock. The input lock prevents the appliance being operated accidentally, e.g. by children.
Application:
- Avoid unintentional modification of functions. - Avoid unintentional switching off of the device. - Avoid unintentional temperature setting.
Activating the input lock
If you activate the input lock, you can continue to navigate in the menus but you cannot select or change other func- tions.

* Depending on model and options

Controls

Indicating the software version

Fig. 50

Fig. 56

Displ. Lock

Fig. 51 u Carry out action steps according to the illustration. w Input lock is activated.
Deactivating the input lock

Fig. 52

Fig. 57 u Carry out action steps according to the illustration. w Display indicates software version.
Reminder
Reminders are given out acoustically by a beep and visually by a symbol in the display. The signal gets louder until the alert stops.

Displ. Lock

Fig. 53 u Carry out action steps according to the illustration. w Input lock is deactivated.

Replace FreshAir active carbon filter This message appears when the air filter needs replacing. u Change the air filter every six months. u Confirm the message with OK. w The service interval resets. w The air filter guarantees the air quality in the fridge.
Activating the setting u Activating/deactivating .

Device information
Use this function to indicate the model name, index, serial number and service number of your device. You will need the device information when you contact customer service. (see 10.4 Customer Service) This function also opens the Advanced menu. (see 3 Func- tionality of the Touch display)
Indicating the device information

Demo mode
Demo mode is a special feature for dealers who want to demonstrate appliance features. If you activate demo mode, all refrigeration functions are deactivated.
If you switch on your appliance and "Demo" appears in the status display, then demo mode is already activated.
If you activate and then deactivate demo mode, the appli- ance will be reset to factory defaults. (see Resetting to factory settings)
Activating demo mode

Fig. 54

Fig. 58

Fig. 55 u Carry out action steps according to the illustration. w Display indicates device information.
Software
Use this function to indicate the software version of your device.

* Depending on model and options

Controls
Fig. 61 u Carry out action steps according to the illustration. w Demo mode is deactivated. w Appliance is switched off. u Switch on the appliance. (see 4.1 Switching on appliance
(first use)) w Appliance is reset to factory settings.
Resetting to factory settings
Use this function to reset all settings to factory defaults. All settings you have made so far are reset to their original settings. Performing a reset
Fig. 62

Fig. 59 u Carry out action steps according to the illustration. w Demo mode is activated. w Appliance is switched off. u Switch on the appliance. (see 4.1 Switching on appliance
(first use)) w "DEMO" appears in the status display.
Deactivating demo mode

Fig. 63 u Carry out action steps according to the illustration. w Device is reset. w Device is switched off. u Restart the device. (see 4.1 Switching on appliance (first
use))
7.3 Fault messages

Fault messages appear in the display. There are two catego- ries of fault message:

Fig. 60

Category Meaning

Message Reminder of general procedures. You can carry out these procedures to eliminate the message.

Warning

Appears when there are malfunctions. A signal sounds in addition to the display. The signal becomes louder until you acknowledge by tapping the display. You can eliminate simple defects yourself. For more serious defects, you must contact customer service.

7.3.1 Warnings

Close the door
This message appears if the door is open for too long.
You can set how long it takes for this message to appear . u Stop alarm: Confirm the message. -oru Close the door.

* Depending on model and options

Error This message appears if there is a fault with the appliance. An appliance component indicates a fault. u Open the door. u Note down the fault code. u Confirm the message. w The signal tone stops. w The status display appears.
17

Features
u Close the door. u Contact customer service. (see 10.4 Customer Service)
8 Features
8.1 4-star freezer compartment*
8.1.1 Opening/closing the freezer compartment
Fig. 66

Fig. 64 Opening the freezer compartment: u Reach into the handle area from below. u Push the handle plate while pulling the door towards you. Closing the freezer compartment: u Close the door while pushing from the front. w Door is engaged.
8.2 Door rack

Fig. 67 u Disassemble the door rack.
8.3 Shelves
8.3.1 Adjusting/removing the shelves
The shelves are prevented from being pulled out acciden- tally by pull out stops.

8.2.1 Move/remove the door rack

Fig. 65 u Slide the rack upwards. u Pull forwards. u Re-insert it in reverse order.
8.2.2 Disassembling the door rack
The door rack can be taken apart for cleaning.
18

Fig. 68 u Lift the shelf and pull forward. w Line up the side runner. u Adjust the height of the shelf: Lift or lower it to the
desired height and slide it in. -or-

Fig. 69

* Depending on model and options

u Remove the shelf completely: Pull it out to the front. u Easier removal: Set the shelf at an angle. u Insert the shelf again: Slide it in all the way. w The pull-out stoppers point downwards. w The pull-out stoppers are behind the front support.
8.4 Dividing shelf
8.4.1 Using the dividing shelf
The shelves are prevented from being pulled out acciden- tally by pull out stops.

Features

Fig. 70 u Push the dividing shelf underneath as shown.

Fig. 72 (1) VarioSafe drawer
(2) Side panels with ribs for VarioSafe drawer

(3) Recesses on the left and right side panel

8.5.1 Inserting the VarioSafe

Fig. 71
Adjusting the height: u Pull the glass panels out Fig. 71 (1) from the front, one at
a time. u Release the support rails and click in at the height you
want. u Slide in the glass panels one at a time. w Flat pull-out stoppers at the front, right behind the
support rails. w High pull-out stoppers at the back.
Using both shelves: u Hold the glass panel with one hand and pull it to the
front. w The glass panel Fig. 71 (1) and trim strip are at the front. w The stops Fig. 71 (3) point down.
Appliances with freezer compartment:* u Do not place the support rails and dividing shelf in front
of the fan.*

Fig. 73 u Insert the VarioSafe into the fridge section at an angle
Fig. 73 (1) until the recesses in the side Fig. 73 (2) of the VarioSafe are at the level of the support rib in the fridge section.

8.5 VarioSafe *
The VarioSafe offers space in the refrigerator compartment for small groceries, packages, tubes and jars, for example.

Fig. 74 u Set VarioSafe straight. Fig. 74 (1) u Lift VarioSafe at the front. Fig. 74 (2)

* Depending on model and options

Features

Fig. 75 u Lift VarioSafe up toward the front. u Push VarioSafe in to the rear. u Lower VarioSafe. w VarioSafe audibly engages. w VarioSafe is inserted.
8.5.2 Repositioning the VarioSafe
You can move the VarioSafe as a whole in the refrigerator compartment.

Fig. 78 u Lift VarioSafe at the front. u Push VarioSafe in to the rear. w VarioSafe audibly engages. w VarioSafe is offset in height.
8.5.3 Moving the VarioSafe drawer
You can use the VarioSafe drawer at two different heights. If you would like to store taller foodstuffs in the VarioSafe drawer, slide the VarioSafe drawer in on the bottom rib. If you would like to store smaller foodstuffs in the VarioSafe drawer, slide the VarioSafe drawer in on the top rib.

Fig. 76 u Lift VarioSafe at the front.

Fig. 79 u Pull out the VarioSafe drawer as far as it will go. u Lift the VarioSafe drawer up at the front. u Remove the VarioSafe drawer to the front.

Fig. 77 u Pull VarioSafe forwards until the recesses in the side of
the VarioSafe are at the level of the support rib in the refrigerator compartment. Fig. 77 (1) u Move VarioSafe up or down in the refrigerator compart- ment until the desired height is reached. Fig. 77 (2)

Fig. 80 u Lift the VarioSafe drawer up at the front. u Place the VarioSafe drawer behind the stoppers on
desired rib Fig. 80 (1) or Fig. 80 (2). w VarioSafe drawer is offset in height.
8.5.4 Removing the VarioSafe
You can remove the VarioSafe as a whole.

* Depending on model and options

Features

Fig. 81 u Lift VarioSafe at the front.

Fig. 84 u Remove VarioSafe as a whole. (see 8.5.4 Removing the
VarioSafe ) u Disassemble VarioSafe according to the illustration.
8.6 Adjustable bottle shelf
8.6.1 Using the bottle shelf
In the bottom of the fridge section you can either use the variable bottle shelf or the glass panel.

Fig. 82 u Pull VarioSafe forwards Fig. 82 (1) until the recesses in
the side of the VarioSafe are at the level of the support rib in the fridge section. Fig. 82 (2)

Fig. 85 u Remove the glass panel and store in a safe place. u Lay bottles with their base towards the rear wall.

Note If the bottles are protruding over the front of the bottle shelf: u Move the lower door rack up a place.

8.6.2 Removing the bottle shelf
You can remove the bottle shelf for cleaning. u Remove the glass panel above the bottle shelf.

Fig. 83 u Set VarioSafe in refrigerator compartment at an angle.
Fig. 83 (1) u Take VarioSafe out to the front. Fig. 83 (2) w VarioSafe is removed.
8.5.5 Disassembling the VarioSafe
You can disassemble the VarioSafe into its individual parts if you want to clean the VarioSafe or if you need to install or remove parts.

Fig. 86 u Lift the bottle shelf at the front and pull out.
Note Liebherr recommends the following: Do not place any goods on the drawer cover below.

* Depending on model and options

Features
8.6.3 Inserting the bottle shelf

w Drawer latches in audibly at the back. Partial pull-out fridge compartment* Removing drawer

Fig. 87 u Slide in the bottle shelf until it engages and push down.
8.7 Drawers
You can remove the drawers for cleaning. The way to remove/insert the drawers varies depending on the pull-out system. Your appliance can contain various pull-out systems.

Fig. 90 u Pull out drawer half-way. Fig. 90 (1) u Push the drawer down at the front. Fig. 90 (2) u Push the left rail in by about 2 cm. Fig. 90 (3) u Push the right rail in by about 2 cm. Fig. 90 (4) u Remove drawer to the front. Fig. 90 (5)

Note The energy consumption increases and the cooling power goes down if ventilation is not sufficient. u Always leave the fan air vents clear on the back wall!

8.7.1 Drawer on telescopic rails
The drawer runs on extendible rails (telescopic rails). There are fully extendible telescopic rails and telescopic rails with partial pull-out. Drawers which are fully extendible can be pulled out fully from the appliance. Drawers with partial pull-out cannot be removed fully from the appliance. The system in your appliance depends on the type of appliance.
Fully extendible*
If you have fully extendible rails, there is a clamp located at the back on the left and right of the rail.
Removing drawer

Fig. 91 If the rails are not yet fully inserted after removing the drawer: u Push rails in completely. Inserting drawer
Fig. 92 u Slide rails in. u Place drawer on rails. u Slide in drawer to the back.

8.8 Fruit & Vegetable safe cover

Fig. 88 u Pull out drawer as far as it will go. u Lift left clamp and simultaneously pull drawer forwards
on the left. Fig. 88 (1) u Lift right clamp and simultaneously pull drawer forwards
on the right. Fig. 88 (2) u Remove drawer to the front. Fig. 88 (3) u Slide rails in.

You can remove the compartment cover for cleaning.
8.8.1 Removing the compartment cover
Ensure that the following conditions are met: q Bottle shelf is removed (see 8.6 Adjustable bottle shelf) .

Inserting drawer

Fig. 89 u Slide rails in. u Place drawer on rails. u Slide in drawer to the back.
22

Fig. 93 When the drawers are removed: u Pull the lid up at the front to the opening in the retaining parts Fig. 93 (1).
* Depending on model and options

u Lift from the back and pull it up and out Fig. 93 (2).
8.8.2 Inserting the compartment cover

Maintenance
8.10 Bottle holder
8.10.1 Using the bottle holder

Fig. 96 u Push the bottle holder onto the bottles. w The bottles are prevented from falling over.

Fig. 94
If the text THIS SIDE UP points upwards: u Insert the lip of the cover over the opening of the rear
bracket Fig. 94 (1) and click into place Fig. 94 (2). u Position the cover where you want it (see 8.9 Adjusting
the moisture levels) .

8.10.2 Removing the bottle holder

8.9 Adjusting the moisture levels

You can adjust the moisture in the drawer yourself by adjusting the compartment cover.
The compartment lid is attached to the drawer and can be hidden by a shelf or additional drawers.

Fig. 97 u Move the bottle holder all the way to the right. u Push the bottle holder to the back to remove.

9 Maintenance

9.1 FreshAir carbon filter

Fig. 95
Low air humidity u Open the drawer. u Slide the compartment cover forwards. w With the drawer closed: Gap between the cover and the
compartment. w The air moisture in the Safe decreases.
High air moisture u Open the drawer. u Slide the cover back. w With the drawer closed: The cover seals the compart-
ment. w The air moisture in the Safe increases.
If there is too much moisture in the compartment: u Choose the setting "low air moisture". -oru Remove any excess moisture with a cloth.

The FreshAir carbon filter is in the compartment above the fan. It guarantees the best air quality. q Replace the carbon filter every 6 months.
When the reminder is set, a message on the display prompts you to change it. q The carbon filter can be disposed of with the regular household waste.
Note FreshAir activated charcoal filters can be purchased from the Liebherr-Hausgeräte store at home.liebherr.com/ shop/de/deu/zubehor.html.
9.1.1 Removing the FreshAir carbon filter

Note You can apply the "low air moisture" setting to the Fruit & Vegetable-Safe and the Meat & Dairy-Safe. u Set the "low air moisture" option.

Fig. 98 u Pull out the compartment Fig. 98 (1). u Remove the carbon filter Fig. 98 (2).

* Depending on model and options

Maintenance
9.1.2 Inserting the FreshAir carbon filter

u Wrap the frozen produce in newspaper or blankets and store in a cool place.

Fig. 99 u Insert the carbon filter as shown in the diagram
Fig. 99 (1). w The carbon filter clicks into place.
If the carbon filter is pointing downwards: u Push the compartment in Fig. 99 (2). w The carbon filter is now ready for use.
9.2 Disassembling / assembling pullout systems

u Place a pan of hot water (not boiling) on the middle shelf. w This speeds up the defrosting process. u Leave the compartment and appliance door open during
defrosting. u Remove loosened pieces of ice. u Soak up the melted ice water with a sponge or cloth
several times as necessary. u Clean the appliance (see 9.5 Cleaning the appliance) .
9.5 Cleaning the appliance
9.5.1 Ready
WARNING Danger of electric shock! u Remove the refrigerator connector or interrupt the power
supply.

9.2.1 Notes on disassembly

You can disassemble some of the pull-out systems for cleaning. Your appliance can contain a variety of pull-out systems.
The following pull-out systems can be disassembled or cannot be disassembled:

Pull-out system

can be disassembled / cannot be disassembled

WARNING Risk of fire u Do not damage the refrigeration circuit.
u Empty the appliance. u Remove mains connector. -oru Activate CleaningMode. (see CleaningMode)

Fully extendible*

cannot be disassembled* 9.5.2 Clean the housing

Partial pull-out fridge compart- cannot be disassembled* ment*
9.3 Defrosting the appliance
WARNING Improper defrosting of the appliance! Injuries and damage. u Do not use mechanical equipment or other methods to
speed up the defrosting process other than those recom- mended by the manufacturer. u Do not use electrical heating or steam-cleaning appli- ances, naked flames or defroster sprays to defrost. u Do not use sharp objects to remove ice.
Defrosting is performed automatically. The water from the thawing process drains through the outlet and evaporates. u Clean the drain opening regularly (see 9.5 Cleaning the
appliance) .

NOTICE Improper cleaning! Damage to the appliance. u Only use soft cleaning cloths and ph-neutral all-purpose
cleaners. u Do not uses abrasive sponges or steel wool which may
cause scratches. u Do not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
WARNING Risk of injury and damage as a result of hot steam! Hot steam can lead to burns and can damage the surfaces. u Do not use any steam cleaners!
u Wipe the housing down with soft, clean cloth. If very dirty, use lukewarm water with a neutral cleaner. Glass surfaces can also be cleaned with glass cleaner.
9.5.3 Cleaning the interior

9.4 Defrosting the freezer compartment manually*
A layer of frost or ice forms after prolonged use.
The following factors promote the formation of frost or ice: - The appliance is opened frequently. - Hot food is put in. u Switch off the appliance . u Pull out the mains plug or switch off the fuse.

* Depending on model and options

Customer help

u Plastic surfaces: clean by hand with a soft clean cloth, lukewarm water and a little detergent.
u Metal surfaces: clean by hand with a soft clean cloth, lukewarm water and a little detergent.
u Drain hole: remove deposits using a thin item (for example a cotton bud).
9.5.4 Clean the components
NOTICE Improper cleaning! Damage to the appliance. u Only use soft cleaning cloths and ph-neutral all-purpose
cleaners. u Do not uses abrasive sponges or steel wool which may
cause scratches. u Do not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
Clean with a soft, clean cloth, lukewarm water and some detergent: - Door rack - Shelf - Dividing shelf - VarioSafe* - Fruit & Vegetable safe cover - Drawer - Adjustable bottle shelf
Clean with a damp cloth: - Retractable rails
Please note: The grease in the tracks is used for lubrica- tion and must not be removed!
Wash in the dishwasher up to 60 °C: - Door rack - Bottle rack - Holder of the dividing shelf u To disassemble components: see the relevant section. u Clean the components.
9.5.5 After cleaning
u Wipe the appliance and the components dry. u Connect and switch on the appliance.
The temperature is cold enough: u Place the food inside. u Repeat cleaning regularly.

10 Customer help

10.1 Technical specifications

Temperature range

Cooling

3 °C to 9 °C

BioFresh

0 °C to 3 °C

Maximum freezing quantity/24 h

Freezer compart- See "Freezing capacity .../24 h" on

ment*

the type plate*

Maximum component capacity

Features

Appliance Appliance Appliance

width

550 mm 600 mm 700 mm

(see instal- (see

(see instal-

lation

installa- lation

instruc- tion

instruc-

tions,

instruc- tions, appli-

appliance tions,

ance

dimen-

appliance dimen-

sions)

dimen- sions)

sions)

Wooden grating

12 kg

Lighting

Class1

Light source

This product contains one or more energy LED efficiency class G light sources.
1 The appliance may contain light sources with different energy efficiency classes. The lowest energy efficiency class is indicated.

10.2 Operating noises

The appliance makes different noises when it is on.
- At higher temperatures the appliance uses less energy but works for longer. It is quieter.
- At lower temperatures the food is cooled faster. It is louder.
Examples:
· Functions on (see 7.2 Appliance functions) · Fan running · Food recently added · High ambient temperature · Door open for a while

Noise Bubbling splashing Hissing
Humming
Humming rustling Clicking
Rattling humming

Possible cause

Type of noise

and Coolant flowing Normal operating into the cooling noise circuit.

Coolant sprays Normal operating into the cooling noise circuit.

The

appliance Normal operating

is cooling. The noise

volume depends

on the cooling

output.

and The fan is running. Normal operating noise

Components are Normal switching switched on and noise off.

or Valves or flaps are Normal switching

working.

noise

* Depending on model and options

Customer help

Noise Vibration
Rattling

Possible cause

Type of noise Lifting

Improper setup

Defective noise

Level the appliance using the adjustable feet.

Components, Defective items inside noise the appliance

Secure components.
Leave enough space between the items.

10.3 Technical fault
Your appliance is designed and built to ensure it works reli- ably and has a long service life. In the unlikely event that a fault occurs during operation, please check whether it is due to an operating error. If so, you will be charged for the callout and repair costs even if it falls within the warranty period. You can fix the following faults yourself.
10.3.1 Appliance function

Defect

Cause

Remedy

The appliance is not working.

The appliance is not switched on. u Switch the appliance on.
The power plug is not properly u Check the power plug. plugged into the socket.

There is something wrong with the u Check the fuse. power outlet fuse.

Power cut

u Keep the appliance closed. u Protecting food: Lay freezer packs on top of the food or
use another freezer if the power is off for a prolonged period. u Do not re-freeze defrosted food,

The appliance plug does not fit the u Check the appliance plug. appliance properly.

Temperature is not The appliance door is not closed u Close the appliance door.

cold enough.

properly.

Not enough ventilation.

u Keep ventilation grille clear, and clean it.

The ambient temperature is too u Problem solution: (see 1.4 Appliance range of use) high.

The appliance was opened too u Wait to see if the required temperature corrects itself.

many times or for too long.

If not, contact Customer Service. (see 10.4 Customer

Service)

The temperature is set incorrectly. u Turn down the temperature and check after 24 hours.

The appliance is too close to a heat u Move the appliance or the heat source. source (oven, radiator, etc).

The door seal is defective or needs to be replaced for another reason.

The door seal can be replaced. It u Contact Customer Service. (see 10.4 Customer Service) can be replaced without the need for special tools.

The appliance

The door seal may have slipped out u Check that the door seal is well fitted in the groove.

builds up too much of its groove.

ice or condensa-

tion.

The appliance is The heat of the refrigeration circuit u This is normal. hot to touch on the is used to avoid condensation. outside*.

* Depending on model and options

Shutting down

10.3.2 Features

Defect The internal light does not come on.
The freezer compartment cannot be closed.*

Cause

Remedy

The appliance is not switched on. u Switch the appliance on.

The door was open for longer than u Interior lighting turns off automatically after approx. 15

15 minutes.

min. with the door open.

The LED interior light is faulty or u Contact Customer Service. (see 10.4 Customer Service) the lid is damaged.

The lock is on when the door is u Use the handle again. open.

10.4 Customer Service
First check whether you can rectify the fault yourself (see 10 Customer help) . If you cannot rectify the problem, contact Customer Service.
You can find the address in the enclosed brochure "LiebherrService" or at home.liebherr.com/service.

WARNING Unprofessional repair! Injuries. u Have any repairs and action - not expressly specified -
on the appliance and mains cable carried out by service personnel only. (see 9 Maintenance) u A damaged mains cable may only be replaced by the manufacturer, the manufacturer's Customer Service or a similarly qualified person. u In the case of appliances with an IEC connector, the change may be made by the customer.
10.4.1 Contacting Customer Service
Make sure that the following appliance information is avail- able: q Appliance name (model and index) q Service no. (Service) q Serial no. (S no.) u Call up the appliance information via the display.
(see Device information) -oru Refer to the type plate for appliance information.
(see 10.5 Model plate)
u Note down the appliance information. u Notify customer service: Report errors and the appliance
information. w This will help us to provide you with a faster, more accu-
rate service. u Follow further instructions from Customer Service.
10.5 Model plate
The model plate is behind the drawers on the inside of the appliance.

Fig. 100
(1) Appliance description (3) Serial no. (2) Service no. u Note the data on the model plate.

11 Shutting down
u Empty the appliance. u Switch off appliance. (see Switching the appliance off
and on) u Remove mains connector. u Remove appliance connector if required: Remove and
move from left to right at the same time. u Clean appliance. (see 9.5 Cleaning the appliance) u Leave the door open, so that no unpleasant odours arise.

12 Disposal

12.1 Preparing appliance for disposal

Liebherr uses batteries in some of its appli- ances. In the EU, for environmental reasons, legislation obliges the end user to remove these batteries before disposing of old appli- ances. If your appliance contains batteries, a corresponding notice is attached.

Lamps

If you can remove the lamps yourself without destroying them, also remove these before disposal.

u Take the appliance out of operation. u Appliances with batteries: remove the batteries. For
description, see Maintenance chapter. u If possible: remove lamps without destroying them.

* Depending on model and options

Disposal
12.2 Disposing of the appliance in an environmentally friendly manner
The appliance still contains valuable materials and must be disposed of separately from unsorted municipal waste.

Lamps For Germany:

Dispose of batteries separately from the old appliance. To do this, you can return the batteries free of charge to retailers as well as recycling centres and collection centres for recyclable materials.
Dispose of removed lamps via the respective collection systems.
You can dispose of the appli- ance free of charge via the class 1 collection containers at the local recycling and recyclable material collection centres. When purchasing a new fridge/freezer, if the sales area > 400 m2, retailers will also take back the old appliance free of charge.

WARNING Leaking coolant and oil! Fire. The coolant contained in the appliance is eco-friendly, but also flammable. The oil contained in the appliance is flammable. Escaping coolant and oil can ignite if the concentration is high enough and in contact with an external heat source. u Do not damage the pipelines of the coolant circuit and
the compressor.
u Observe the notes on transporting the appliance. u Transport the appliance without damaging it. u Dispose of batteries, lamps and the appliance according
to the above specifications.

* Depending on model and options

Disposal

* Depending on model and options

home.liebherr.com/fridge-manuals

Issue date: 20240417

Part number index: 7083568-01

Liebherr-Hausgeräte Marica EOOD Bezirk Plovdiv 4202 Radinovo Bulgarien

References

Antenna House XSL Formatter V7.3 MR5 Windows : 7.3.6.62109 (2023-09-14T17:58 09) Antenna House PDF Output Library 7.3.1871