Instruction Manual for Sunco models including: 1x4, PN14 SW-WH-3550K-1PK, 1x4 Selectable Ceiling Panel, PN14 SW-WH-3550K-1PK 1x4 Selectable Ceiling Panel, Selectable Ceiling Panel, Ceiling Panel, Panel
LED Ceiling Panel 1x4, 46W | Commercial Lighting | SUNCO – Sunco Lighting
PN14 SW-WH-3550K-2PK Installation Manual (PDF) Sunco Lighting Sunco Lighting Sunco,2,Pack,1x4,LED,Flat,Panel,Light,Fixture,Selectable,Wattage,30W/40W/46W,&,Selectable,Color,Temperature,3500K/4000K/5000K,Matte,White,Drop,Ceiling,Office,Lights,-,ETL,,DLC,,Energy,Star,B0BZ5KWWSG,B0BB89NSBJ,B0BB8BYNRN
Sunco 2 Pack 1x4 LED Flat Panel Light, Dual Selectable CCT 3500K/4000K/5000K & Selectable Wattage 30W/40W/46W, 5700LM, Dimmable 0-10V, Matte White Drop Ceiling Fixture - ETL, DLC, Energy Star
Required Tools: Screwdriver, Ladder, Wire Strippers 1X4 SELECTABLE CEILING PANEL 12 Installation Manual COMPONENTS x1 Mounting Bracket x4 Screws x4 Plastic Anchors x3 Wire Nuts x4 Safety Cable x4 Shockproof Hook EASY INSTALLATION OFF ON Turn Power OFF 1. Turn off power at fuse or circuit breaker before installing. 2b. If no junction box is present, attach mounting bracket to ceiling using (4) plastic anchors and screws 47.5 1.3 2a. Use screws to attach mounting bracket to existing junction box -Use with 2.1", 2.75", or 3.5" junction box 3. Clip safety cable from light to mounting bracket for added security 5000/4000/3500K 5750/5000/3750LM 4. Use switches to choose CCT and brightness settings: Brightness -30W -40W -46W CCT -3500K -4000K -5000K 6. Hold panel flush against ceiling, then slide and lock into place N (White) Light L (Black) Ground wire (Green) House / office OFF ON Turn Power ON 5. Connect supply wires to fixture wires - Black to Black (Live) - White to White (Neutral) - Green to Green (Ground) 7. Turn on circuit breaker and test light SPECIFICATIONS Voltage Selectable Wattage Moisture Rating Housing Material Weight Warranty 120VAC 30W/40W/46W Damp Aluminum+Galvanized Iron Plate 5.5 lbs 7 Years WARNING To reduce the risk of fire, electric shock, or physical injury: · This product should be installed by a person familiar with the construction and operation of the product and the hazards involved. Safety eyeglasses and gloves are recommended. · Check for shipping damage before installing. If the product is damaged, do not use it. · Turn off the switch and circuit breaker before installing this fixture. · Proper grounding is required to ensure safety. · Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents. · Use safety precautions and abide by regional and local laws or regulations. FCC NOTES · This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. · Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.Adobe PDF Library 16.0.7 Adobe InDesign 17.3 (Windows)