QUICK GUIDE
Be safe in the car
BeSafe iZi Twist B i-Size
BeSafe iZi Twist i-Size
BeSafe iZi Turn B i-Size
BeSafe iZi Turn i-Size
max. 60 cm
max. 87 cm
max. 105 cm
max. 18 kg
approx. 2 years
max. 105 cm
max. 18 kg
iZi Twist B i-Size
iZi Turn B i-Size
iZi Twist i-Size
iZi Turn i-Size
1. Installation
Step 1: Attach the car seat to the vehicle's ISOFIX connectors. Ensure both connectors are securely attached (indicated by a "Click!").
Step 2: Extend the support leg until it rests firmly on the vehicle floor. Ensure the indicator shows green for correct installation.
Step 3: Secure the top tether (if applicable) to the designated anchor point in the vehicle.
Step 4: Check all indicators to ensure the seat is installed correctly and safely.
2. Usage
The car seat is suitable for children up to approximately 4 years old.
Adjusting the harness:
Step 1: Place the child in the seat and fasten the harness. Ensure the harness is snug and at the correct height for the child's shoulders.
Step 2: Adjust the headrest to the appropriate height for the child.
Step 3: Ensure the rotation mechanism is locked in the forward-facing position for travel.
3. Installation baby shell (only iZi Twist B and iZi Turn B)
This section details the installation of the baby shell component for specific models.
(only iZi Turn B)
(only iZi Turn B)
(only iZi Turn B)
4. De-installation
Step 1: Release the top tether (if applicable).
Step 2: Retract the support leg.
Step 3: Release the ISOFIX connectors by pressing the release buttons.
Step 4: Lift the car seat out of the vehicle.