Philips CorePro LEDspot MV
CorePro LEDspot 4.6-50W GU10 830 36D
CorePro LEDspots are a perfect fit for spot lighting and deliver warm halogen-like light. They are compatible with most existing fixtures with a GU10 or E14 holder and are designed as a retrofit replacement for halogen or incandescent spots. LEDlamps deliver huge energy savings and minimize maintenance cost.
Product Data
| General Information | |||
|---|---|---|---|
| Cap-Base | GU10 | Input Frequency | 50 to 60 Hz |
| Nominal lifetime | 15,000 hour(s) | Power Consumption | 4.6 W |
| Switching Cycle | 50,000 | Lamp Current (Nom) | 39 mA |
| Lighting Technology | LED | Wattage Equivalent | 50 W |
| Flux measurement reference | Narrow Cone | Starting Time (Nom) | 0.5 s |
| Warm-up time to 60% light | 0.5 s | ||
| Power Factor (Fraction) | 0.5 | ||
| Voltage (Nom) | 220-240 V | ||
| Light Technical | Temperature | ||
|---|---|---|---|
| Color Code | 830 [CCT of 3000K] | T-Case Maximum (Nom) | 72 °C |
| Beam Angle (Nom) | 36 degree(s) | ||
| Luminous Flux | 370 lm | Controls and Dimming | |
| Luminous Intensity (Nom) | 740 cd | Dimmable | No |
| Color Designation | White (WH) | ||
| Correlated Color Temperature (Nom) | 3000 K | Mechanical and Housing | |
| Luminous Efficacy (rated) (Nom) | 80.00 lm/W | Bulb Shape | PAR16 |
| Color Consistency | <6 | Net Weight (Piece) | 0.045 kg |
| Color rendering index (CRI) | 80 | ||
| LLMF At End Of Nominal Lifetime (Nom) | 70% | Approval and Application | |
| Luminous Flux in 90° Cone (Rated) | 370 lm | Energy Efficiency Class | F |
| Photobiological safety according to EN 62471 | RG1 | Suitable For Accent Lighting | Yes |
| Energy Consumption kWh/1000 h | 5 kWh | ||
| Operating and Electrical | |||
|---|---|---|---|
| Line Frequency | 50 to 60 Hz | ||
Product Information
| EPREL Registration Number | Full product name | Full product code | Order code |
|---|---|---|---|
| 391858 | Corepro LEDspot 4.6-50W GU10 830 36D | 871869672837600 | 929001218102 |
| CE mark | EU RoHS compliant | EyeComfort | Material Nr. (12NC) |
|---|---|---|---|
| Yes | Yes | Yes | 929001218102 |
| Flickering value (PstLM) - Flickering value as per 1 | Stroboscopic effect visibility measure (SVM) | Numerator - Quantity Per Pack | Numerator - Packs per outer box |
|---|---|---|---|
| EN 61000-3-3 | 0.4 | 1 | 10 |
| EAN/UPC - Product/Case | EAN/UPC - Case | Product Data | |
|---|---|---|---|
| 8718696728376 | 8718696728383 | Order product name | Corepro LEDspot 4.6-50W GU10 830 36D |
Dimensional Drawing
A diagram showing the dimensions of the LEDspot. The key dimensions are labeled D and C.
| Product | D | C |
| Corepro LEDspot 4.6-50W GU10 830 36D | 50 mm | 54 mm |
Photometric Data
A spectral power distribution graph showing the light output across different wavelengths, peaking in the yellow-green spectrum (around 550nm). The graph is labeled "Spectral Power Distribution Colour - Corepro LEDspot 4.6-50W GU10 830 36D".
A polar intensity diagram showing the light distribution pattern. The light is most intense directly in front of the lamp (0 degrees) and decreases significantly at wider angles.
A table indicating dimensions: D = 50 mm, C = 54 mm.
The document also mentions "Accent Lighting Spots - Corepro LEDspot 4.6-50W GU10 830 36D".
Lifetime and Lumen Maintenance
A graph titled "Life Expectancy Diagram" shows the failure rate in percentage over time in hours. The failure rate remains low until around 15,000 hours, after which it increases sharply, reaching 100% failure around 20,000 hours.
A graph titled "Lumen Maintenance Diagram" shows the lumen output in percentage over time in hours. The lumen output starts at 100% and gradually decreases, reaching approximately 70% at 15,000 hours and around 60% at 20,000 hours.
