User Manual for Orimade models including: Adhesive Corner Shower Caddy Shelf with 2 Movable Hooks, Adhesive, Corner Shower Caddy Shelf with 2 Movable Hooks, Caddy Shelf with 2 Movable Hooks, Shelf with 2 Movable Hooks, 2 Movable Hooks, Movable Hooks

User Manual (PDF)

Orimade Adhesive Corner Shower Caddy Shelf with 2 Movable Hooks,Shower Caddy No Drilling Wall Mounted Bathroom Accessories SUS304 Stainless Steel 2 Pack, Silver : Home & Kitchen

PDF preview unavailable. Download the PDF instead.

71fXvIjcm3L
GB
Instruction Manual
Shower Caddy

Caution
Please read this part carefully before your installation.
 For 90° right angle corner only  Please clean and dry the surface before the installation  Please ensure the adhesive strips are attached on smooth
surface.  Please squeeze out the air when applying the adhesive strips.  Please wait 24 hours before using the product.  Please note that adhesive strip is for single use.  If there is any need to remove the adhesive strip, a hair dryer
will give you a hand.

This product is not suitable for the following wall surfaces:

Rough Painted Wall Wallpaper

Surface Wall

Wall

Limed Wall Concrete Wall Cement Wall

Installation Steps
1. Clean the product installation surface, ensuring surface is clean and dry.
2. Prepare the pencil and the corner caddy, place the corner shower caddy in the 90-degree corner, draw the line with the pencil along the top two sides of the corner shower caddy.
Caution
Place the corner shower caddy evenly, so that they are not high on one side and low on the other.

3.Tear off the back cover of the adhesive, stick the adhesive on the dry surface and press the adhesive firmly to squeeze all the air out of the adhesive, especially the hook area.
Caution
Stick the adhesive from the most inside of the corner to the outside, and don't leave any distance between the corner and the adhesive.
4.Hang the corner shower caddy on the hooks on the adhesive.

5.Hang the hooks on the corner shower caddy.
Remove Tips: Use hair dryer to heat the adhesive surface.
After heating, the film will be taken off easily. The traces of adhesive strips left on the wall can be wiped down with alcohol after pulling off the adhesive strips.
Made In China