MEMPHIS Garderobe Assembly Instructions
This document provides assembly instructions for various MEMPHIS Garderobe models, including 3S A1 WH 01, 3S A1 WH 10, 3S A1 WH 40, 3S A1 - 50, and 3S A1 WH 60.
General Information and Safety
Please follow all safety instructions and assembly steps carefully. Ensure you have all parts and tools before beginning assembly. The assembly process may require two people.
Safety Symbols:
- Do not touch [hand symbol]
- Assembly time: Approximately 1.5 hours [clock symbol]
- Material: 100% Cotton [cotton symbol]
- Recycling information: Dispose of furniture responsibly through designated channels (Association, Magasin, Déchèterie). Visit https://quefairedemesdechets.fr for more information. [recycle symbol]
- Warning: Ensure correct assembly to avoid damage or injury. [warning triangle symbol]
- Tools required: Screwdriver, hammer, scissors, measuring tape. [tool icons]
- QR Code: Scan for more information. [QR code symbol]
- Contact: info@bega-consult.de
Parts List and Hardware
The following table lists the components and hardware required for assembly. Refer to the diagrams for specific part identification.
| Part Number | Description | Quantity |
|---|---|---|
| B1 | Screw 8x28 | 12 |
| T1 | Screw 4x16 | 12 |
| M1 | Screw 15x12 | 12 |
| C2 | Dowel φ20 | 8 |
| W1 | Screw 4x20 | 16 |
| J23 | Screw 3x16 | 12 |
| P2 | Screw 3x16 | 4 |
| E3 | Screw 6,3x24 | 10 |
| P13 | Screw 3,5x13 | 6 |
| Z2c | Screw 4x16 | 8 |
| S9 | Screw 4x16 | 16 |
| F10 | Screw 3x13 | 5 |
| P5 | Screw 4x30 | 5 |
| W1 | Screw 4x20 | 16 |
| J11 | Screw 3,5x13 | 1 |
| T17 | Screw 8x50 | 1 |
| F50 | Screw 8x50 | 3 |
| E4 | Screw 6x8 | 6 |
| T10 | Screw 8x50 | 3 |
| L6 | Dowel | 2 |
| 1Z | Screw | 4 |
| A14 | Screw M4x22 | 11 |
| 2Z | Screw | 1 |
| A9 | Screw M4x30 | 3 |
| K2 | Screw 7x70 | 5 |
Assembly Steps
Follow the numbered steps below for assembly. Each step includes diagrams illustrating the process.
Step 1: Assemble Base Panels
Attach part B1 to panels 7 and 8 using screws T1.
Step 2: Attach Side Panels
Connect side panels to the base using appropriate hardware as shown in the diagrams.
Step 3: Install Shelves
Insert shelves into the designated slots and secure them with the provided hardware.
Step 4: Attach Back Panel
Slide or attach the back panel into place.
Step 5: Install Doors
Mount the doors using the hinges and screws provided. Adjust hinges as needed for proper alignment.
Step 6: Final Touches
Install any remaining hardware, such as handles or decorative elements.
Step 7: Load Capacity
Ensure that the weight on each shelf does not exceed the specified limits (e.g., max 5kg, max 10kg).
Dimensions
Refer to the diagrams for specific dimensions of the wardrobe and its components.
