Tapo DL110 Smart Wi-Fi Door Lock Quick Start Guide

Welcome to Tapo!

For technical support, user guides, warranty, and more information, visit www.tapo.com/support.

Installation Guide & Video

Scan the QR code or visit https://www.tp-link.com/support/faq/4052/

Contact Us

Our expert Technical Support team is ready to assist you. Please don't hesitate to reach out with any questions.

EMAIL | CHAT | CALL

Visit https://www.tp-link.com/support/contact-technical-support/

*Images may differ from your actual product.

Contents

1. Parts in the Box
2. Installation Preparation
3. Installation
4. Setup
5. How to set the PIN code and register your fingerprint
6. What if the battery is dead while you are outside?
7. Appearance

Parts in the Box

The package includes the following components:

• Exterior Assembly: The outer part of the lock with a keypad and fingerprint scanner.
• Interior Assembly: The inner part of the lock with the thumb latch and battery compartment.
• Battery Pack: The rechargeable battery for the lock.

Install the Bolt & Strike Plate

Packaged Together

• Bolt: The latch mechanism that extends into the door frame.
• Strike Plate: A metal plate installed on the door frame to receive the bolt.
• Dust Box: A component for the strike plate installation.
• Bolt Screws (ST4*25)×2: Screws for securing the bolt.
• Strike Plate Screws (ST4*25)×2: Screws for securing the strike plate.

Install Mounting Plate

Actual Size

• A (M5*58)×2: Two screws for mounting plate installation.
• B (M5*68)×2: Two longer screws for mounting plate installation.

Mounting Plate: A metal plate that attaches to the inside of the door to support the interior assembly.

Installation Reference Line Sticker for Interior Assembly: A sticker to help align the mounting plate on the inside of the door.

Installation Reference Line Sticker for Exterior Assembly

Actual Size

• C (M4*7.5)×3: Three screws for the exterior assembly.
• D (ST4*20)×1: One screw for the exterior assembly.

USB Adapter Cable: A cable for charging the battery.

Measuring Template: A paper template for measuring door dimensions.

Keys ×2: Two physical keys for manual unlocking.

Silicone Cover: A cover for the Type-C port.

Quick Start Guide: This document.

Installation Preparation

Check Door Lock Compatibility

1. Check your existing door lock type.

• Compatible with Single Cylinder Deadbolt: [✔️] This type of lock is compatible.
• Lever Handle Lock Not Compatible: [❌] This type of lock is not compatible.
• Integrated Locks Not Compatible: [❌] This type of lock is not compatible.
• Mortise Locks Not Compatible: [❌] This type of lock is not compatible.

2. Measure your door.

Place the measuring template on the door, aligning its door edge line with the door edge. Ensure you use the correct door edge line based on your backset distance.

• Door Thickness: 1-3/8'' to 2-11/64'' (35-55 mm)
• Backset: 2-3/8'' (60 mm) or 2-3/4'' (70 mm)
• Minimum Distance: 2-9/16'' (65 mm)

Use the measuring template to measure your door.

Charge Your Battery

When the battery is not installed

Plug the provided USB cable into the battery pack's Type-C port, then connect it to a power outlet via a USB adapter with 5V output.

LED Indication:

• Charging: Solid amber
• Fully charged: Solid green

Note:

1. Charge the battery before use. This will take a few hours. It is recommended to use a 5V/2A adapter for best charging performance.
2. The USB adapter is not provided.

When the battery is installed

Remove the battery cover. Plug the provided USB cable into the battery pack's Type-C port, then connect it to a power outlet via a USB adapter with 5V output.

LED Indication:

• Charging: Solid amber
• Fully charged: Solid green

Note:

1. Charge the battery before use. This will take a few hours. It is recommended to use a 5V/2A adapter for best charging performance.
2. The USB adapter is not provided.

Installation

Installation Overview

The installation involves assembling the exterior and interior parts of the lock onto the door.

• Exterior Assembly
• Mounting Plate
• Interior Assembly
• Battery Pack
• Battery Cover
• Bolt

1. Remove your existing lock.

Remove your existing door lock and bolt.

2. Install the new bolt.

A. Ensure the word TOP is facing up.

B. If the latch hub is not centered in the door hole, twist the bolt to extend it.

3. Install the exterior assembly.

A. Place the exterior assembly sticker on the outside door by aligning its door edge line with your door edge. Ensure you use the correct door edge line based on your backset distance (2-3/8'' or 2-3/4'').

B. If the door hole is 2-1/8'' (54 mm), keep the spacer. If it's 1-1/2'' (38 mm), remove the spacer first.

C. The cable goes under the bolt.

D. Align the tailpiece with the center hole of the bolt, and insert it into the center hole.

4. Install the mounting plate.

A. Place the interior assembly sticker on the inside door by aligning its door edge line with your door edge. Ensure you use the correct door edge line based on your backset distance (2-3/8'' or 2-3/4'').

B. Route the cable through the mounting plate hole.

C. Align the mounting plate with the sticker and secure it using two screws. Choose screw A (M5*58) for door thickness 1-3/8'' to 1-49/64'' (35-45 mm), or screw B (M5*68) for door thickness 1-49/64'' to 2-11/64'' (45-55 mm).

DO NOT use an electric screwdriver to secure the screws.

5. Install the interior assembly.

A. Remove the battery cover.

B. Connect the cable tightly, ensuring the color side faces up.

C. Tuck the excess cable into the groove.

D. Align the tailpiece with the key cylinder. Attach the interior assembly to the mounting plate.

E. Rotate the thumb latch to ensure the latch retracts normally.

F. Use the three provided M4*7.5 screws to affix the interior assembly.

G. (Optional) Use the provided ST4×20 screw to secure the interior assembly and mounting plate to the inside door.

6. Install the battery.

A. Insert the battery into the interior assembly with the correct direction.

B. Replace the cover by sliding it down.

C. Insert the silicone cover into the bottom hole. Remove the stickers.

7. Install the dust box & strike plate.

Insert the dust box and strike plate into the strike hole on the door frame. Ensure the depth of the strike hole is at least 1'' (25.4 mm).

If the bolt operates smoothly without pushing or pulling the door, you can use your original strike plate. If you need to push or pull the door for smooth operation, adjust the strike plate's position on the door frame.

Setup

Set Up Your Lock

1. Get the Tapo app

Download the Tapo app from the App Store or Google Play and log in with your TP-Link ID. If you do not have an account, create one first.

2. Add your lock in the app

Tap the [+] button in the app. Select 'Door Locks' and then your model. Follow the app instructions to complete setup.

The Tapo app is needed to use this lock. If this lock was professionally installed (or installed by someone other than the homeowner), make sure this step was performed by the homeowner.

How to set the PIN code and register your fingerprint

The PIN code and fingerprint should be set in the Tapo app. Tapo will guide you to set your access code and register your fingerprint.

What if the battery is dead while you are outside?

• Unlock via the provided key: Gently pull out the doorbell cover to expose the cylinder. Unlock the door with the provided key.
• Temporarily power up the lock: Connect the lock to a power outlet or power bank using a USB cable. This will provide a temporary power supply and will not charge the battery. Note that this port is for power only and cannot transfer data.

Appearance

Exterior Assembly

1. Fingerprint Scanner: Lock/unlock with your fingerprint.
2. Status LED: Indicates the status of your device.
3. Key Pad: Lock/unlock the door by entering your PIN code.
4. Unlocking/Locking Button: When you enter your PIN code starting with scramble digits, press this button to confirm unlocking. Press this button independently to lock the door.
5. Backspace: Press to delete the digit you entered.
6. Lock Cylinder: Used to unlock via the provided keys.
7. Ring Button: Press to ring the built-in doorbell.
8. Type-C Port: Connect to a power outlet to provide a temporary power supply.

Interior Assembly

1. Wi-Fi On/Off Button: Turn on Wi-Fi and connect your device to a Wi-Fi network for remote control. Turn off Wi-Fi and only control your device locally via Bluetooth.
2. Thumb Latch: Rotate to lock/unlock the door.
3. Battery Compartment: Insert the provided battery to power your lock.
4. Reset: Press and hold for 5 seconds to reset Wi-Fi settings. Press and hold for 10 seconds to reset to factory default settings.

Status LED Indications

Specifications

• Type-C Emergency Power Supply: 5V
• Battery Power: 3.6V
• Rainproof Rating: IP65 (only for the exterior assembly)

Safety Information

• Do not use a damaged charger or USB cable to charge the device.
• Do not attempt to disassemble, repair, or modify the device. If service is needed, contact TP-Link.
• Do not use the device where wireless devices are not allowed.
• Do not use any chargers other than those recommended.
• Keep the device away from water, fire, humidity, or hot environments.
• Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction, resulting in an accident.
• Observe restrictions on using wireless products in fuel depots, chemical plants, or when blasting operations are in progress.
• Never put metal objects inside the product. If a metal object enters the product, turn off the circuit breaker and contact an authorized electrician.
• This product is not intended for use when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
• This product may interfere with other electronic products such as TVs, radios, personal computers, phones, or other wireless devices.
• Exterior Assembly Operating Temperature: -30 °C ~ 70°C (-22°F ~ 158°F)

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

CAUTION! Risk of fire or explosion if the battery is replaced by an incorrect type.

CAUTION! Avoid replacement of a battery with an incorrect type that can defeat a safeguard. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, as this can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Compliance Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement CAN ICES-003 (B)/NMB-003(B)