EPSON 97H 3LCD Projector User Guide

User Guide for EPSON models including: 97H 3LCD Projector, 97H, 3LCD Projector

EPSON POWERLITE 97H (01) PDF MANUAL – MANUAL-HUB.COM

File Info : application/pdf, 4 Pages, 4.34MB

EPSON POWERLITE 97H (01)

PowerLite® 97H/98H/99WH/955WH/965H

Quick Setup
Before using the projector, make sure you read the safety instructions in the online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online User's Guide for details.
Computer
USB cable HDMI cable VGA cable Audio cable

Camera, USB device, or Epson DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06 document camera to the projector's USB-A (flat) port.
USB cable
If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's PC Free feature. You can also connect other Epson document cameras to the projector. See the online User's Guide for details.
Mobile media device
Connect tablets, smartphones, and other devices that support the MHLTM standard to the HDMI2/MHL port.

USB port Connect the square end of a USB cable to the projector's USB-B (square) port. Connect the flat end of the cable to any USB port on your computer.
Windows® XP or later: After turning on the projector, follow the on-screen instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only on first connection). If the software screen does not display automatically, open My Computer or Computer, then double-click EPSON_PJ_UD.
OS X 10.5.8 or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection).

Computer port

Connect one end of a VGA cable to the projector's Computer1 or Computer2

port, and the other end to your computer's

monitor port. If you are using

a laptop, switch it to external display (see "Troubleshooting"). You can also

connect an audio cable.

HDMI port Connect one end of an HDMI cable to the projector's HDMI1 or HDMI2 port and the other end to an HDMI port on your computer.

Wired network
You can connect the projector to your network using an Ethernet cable.

MHL cable
Some devices may require an adapter or may not require an MHL cable. Not all features or functions may be supported. Check your device's documentation for more information.
External monitor, external speakers, and microphone
You can also connect an external monitor, external speakers, or a microphone to your projector to enhance your presentations. See the online User's Guide for details.
Turn on your equipment
1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns blue.

See "Project over a wired network" for instructions.
Video device
Connect multiple video devices and use the Source Search button on the projector or remote control to switch between them.
S-Video cable RCA video cable
Audio cable HDMI cable
Component video to VGA cable Audio cable

3 Open the A/V Mute slide all the way.

https://manual-hub.com/

4 Press the power button on the projector or remote control. The projector beeps, and the Status light flashes blue and then stays on.

Using the remote control
Make sure the batteries are installed as shown (two AA batteries)

Note: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down.
5 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system.
Adjust the image
1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet.
2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position.
3 Turn the zoom ring to enlarge or reduce the image.

Turn projector on and off

Choose which source to display

Access projector menus
Turn off projector display

Navigate projector menus
Get solutions to common problems

For more information on using the remote control, see the online User's Guide.
Project wirelessly
Follow the steps here to connect the projector over a wireless network. You will need the optional wireless LAN module (part number V12H418P12).
1 To install the wireless LAN module, first remove the screw as shown.

4 Turn the focus ring to sharpen the image.

2 Connect the wireless LAN module to the USB-A (flat) port.

5 If your image looks like

, you may have placed the projector

off to one side of the screen at an angle. Place the projector directly in

front of the center of the screen, facing the screen squarely. If you can't

move the projector, use the horizontal keystone slider to correct the

image.

6 Your projector automatically adjusts images that look like

but if necessary you can press the or button on the projector to

correct it.

3 To configure your projector for wireless projection, do one of the following:
· If you're using the optional Quick Wireless Connection USB
key (Windows only, part number V12H005M09), press the LAN button on the remote control. When you see SSID and IP address information on the screen, remove the wireless LAN module and connect the key to the projector's USB-A port. Look for the displayed message, remove the key, and connect it to a USB port on your computer. Follow the on-screen instructions to install the driver, then reconnect the wireless LAN module to the projector's USB-A port. For details, see the online User's Guide.
· If you're not using the key, continue with the steps on the next
page.

https://manual-hub.com/

4 Attach the wireless LAN module cover and secure it using the screw you removed.
5 Press the Menu button on the remote control, select the Network menu, and press .
6 Choose Network Configuration and press . 7 Select the Wireless LAN menu and press .

11 To prevent the SSID and IP address from appearing on the network standby screen, set the SSID Display and IP Address Display settings to Off.

12 When you're finished selecting settings in the Wireless LAN menu, press Esc.

13 If you are connecting the projector to a secure network, select the Security menu and press . Then select settings and press Esc when you're finished.

14 Select Complete and press save your settings.

, then select Yes and press

again to

15 See "Install network software" for additional instructions.

Project over a wired network
Follow the steps here to configure your projector for your wired network using the projector's menu system.
1 Plug in and turn on the projector. 2 Press the Menu button on the remote control, select the Network
menu, and press .

8 Choose Connection Mode, press , select Quick (for a direct connection to a computer, tablet, or smartphone) or Advanced (for a connection to a router or access point), then press again. When you're finished, press Esc to return to the Wireless LAN menu.

9 If you chose the Advanced connection mode, select SSID, press

and

enter your network name (SSID) on the screen that appears.

3 Select Network Configuration and press . 4 Select the Basic menu and press .

· To select a number or character, use the arrow buttons on the
remote control to highlight it, then press .
· To switch between uppercase and lowercase letters, select CAPS
and press .
· To change the displayed symbols, select SYM1 or SYM2 and
press .
When you're finished entering the SSID, select Finish and press .
10 If you chose the Advanced connection mode, select IP Settings and press .
If your network assigns addresses automatically, turn on DHCP. If not, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed.
To enter numbers, use the arrow buttons on the remote control to highlight a number, then press the button. When you're finished entering an address, highlight Finish, then press . Press Esc.

5 Select the Projector Name setting and enter a name (up to 16 characters long) to identify your projector over the network. Use the displayed keyboard to enter characters. Press the arrow buttons on the remote control to highlight the characters and press to select them. Note: See the online User's Guide for information on adding passwords.
6 Select the Wired LAN menu and press .
7 Choose IP Settings and press .

https://manual-hub.com/

8 If your network assigns addresses automatically, turn on the DHCP setting. If not, turn off the DHCP setting and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. Then press Esc.

9 To prevent the IP address from appearing on the network standby screen, set the IP Address Display setting to Off.

10 When you are finished, select Complete and press again to save your settings.

, then press

11 Press the Menu button to exit the menu system. 12 See "Install network software" for additional instructions.

Install network software

Computer
Install the EasyMP® Network Projection software on each computer that will project over the network. Use the CD labeled Epson Projector Software to install the program.
For instructions on installing and using your network software, click the icon on your desktop to access the online EasyMP Network Projection Operation Guide (requires an Internet connection). If you don't see the EasyMP Network Projection Guide icon, you can install it from the projector CD or go to the Epson website, as described on the right.
To monitor and control your projector over the network, download and install the EasyMP Monitor software and manual from the Epson support web site. You can install a link to the downloads page from the projector CD or go to the Epson website, as described on the right
Mobile device
To project from an iOS or AndroidTM device, download and install the Epson iProjectionTM app. Visit epson.com/projectorapp (U.S.) or epson.ca/projectorapp (Canada) for more information.

Troubleshooting

If you see a blank screen or the No signal message after turning on your computer or video device, check the following:

· Make sure the Status light on the projector is blue and not flashing, and
the A/V Mute slide is open.

· Press the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.

· If you're using a Windows laptop, press the function key on your

keyboard that lets you display on an external monitor. It may be labeled

CRT/LCD or have an icon such as

. You may have to hold down the

Fn key while pressing it (such as Fn + F7). Wait a moment for the display

to appear.

· If you're using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab, and select the Mirror Displays
checkbox.

Where to get help

Manuals
For more information about using the projector, click the icons on your desktop to access the online manuals (requires an Internet connection). If you don't have icons to the manuals, you can install them from the projector CD or go to the Epson website, as described below.
Telephone support services
To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Internet support
Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD included with your projector or register online at epson.com/webreg.
Optional accessories
For a list of optional accessories, see the online User's Guide.
You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian sales).

EPSON, EasyMP, and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.

OS X and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in XXXXXX

CPD-42065

https://manual-hub.com/

References