Introduction
This document presents the findings of a Specific Absorption Rate (SAR) evaluation for the DOOGEE DK10 Smart Phone. The testing was performed by Shenzhen NTEK Testing Technology Co., Ltd. in accordance with the requirements outlined in FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992, and IEEE Std 1528-2013.
The report confirms that the DOOGEE DK10 is in compliance with the general population/uncontrolled exposure limits for SAR, which are set at 1.6 W/kg. The evaluation utilized established measurement methods and procedures, including those specified in IEEE Std 1528-2013 and relevant KDB procedures.
Device Information
Product Name: Smart Phone
Brand Name: DOOGEE
Model Name: DK10
Family Models: DK10 Pro, V40, V40 Pro, V40 Plus, V40 Ultra
FCC ID: 2AX4YDK10
The device is categorized for general population/uncontrolled exposure and features an LDS Antenna. It supports a wide range of operating modes, including GSM, WCDMA, LTE, WLAN (2.4G/5G), Bluetooth, and NFC.
Testing and Compliance
The SAR evaluation was conducted using the SATIMO SAR Measurement System, employing a high-precision robot and a specific dosimetric E-field probe. The testing covered various RF exposure conditions, including head, body-worn, and hotspot scenarios.
The report details the maximum reported SAR values for different configurations and confirms the device's adherence to the specified safety limits. For detailed information on the measurement system, procedures, and results, please refer to the full report.
Prepared for: Shenzhen DOOGEE Hengtong Technology CO.,LTD
Prepared by: Shenzhen NTEK Testing Technology Co., Ltd.
For more information about Shenzhen NTEK Testing Technology Co., Ltd., visit www.ntek.org.cn.
