batteries.It
User Manual for Kte models including: RT006, 2AZQE-RT006, 2AZQERT006, RT006 Ceiling Fan Remote Control, Ceiling Fan Remote Control
KTE (ZHONGSHAN) ELECTRICAL LTD RT006 2AZQE-RT006 2AZQERT006 rt006
File Info : application/pdf, 2 Pages, 161.86KB
DocumentDocumentCeiling Fan Remote Control User Manual ModelRT006 Functions of the button on the remote-control transmitter: 1 Fan On/ Off E A 2 Fan Speed Control, total 6 speeds A E A 3 Light Ambient A E A 4 Light control +Bright/-Dim A E A 5 Fan Rotate Direction: Clockwise and A E A Anti-clockwise 6 Timer (1Hr, 2Hrs or 4Hrs) A E A 7 Variable Breeze A E A Pairing Mode (By pressing 1H and 4H buttons simultaneously) LED indicator Attention 1T 1. When the remote-control transmitter cannot control the receiver, please check whether the batteries are installed properly or not.Also check the power level of the batteries.It may affect the control anddecrease the signal transmission if the power levelof the batteries is too low. 2. When the transmitter cannot control the receiver, please check if 1T there are any similar products nearby.The similar remote-control 1T 1T 1T products transmit radio waves at the same time, which will cause interference. 3. Replace the batteriesif the power levelof the batteryis too low. Leakage from the battery may cause damage of the transmitter.Please dispose of used battery properly and keep battery out of the reach of children. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.