Dryer Vent Kit

Installation Instructions

Accessories List

The accessories list shows the following components:

• A (x1): A connector piece, likely for attaching the hose to the dryer outlet.
• B (x1): A larger, bucket-shaped piece, likely for the wall vent connection.
• C (x1): A flexible, corrugated hose.
• D (x1): A mounting bracket with accompanying screws.
• E (x2): Clamps or fasteners, used for securing the hose.
• F (x3): Various rings or adapters, potentially for fitting different hose diameters.

Installation Steps

Follow these steps for installation:

1. Step 1: Shows Part C (flexible hose) being attached to Part A (dryer adapter). Arrows indicate a downward connection.
2. Step 2: Shows Part E (clamp) being placed around Part C (hose) and then inserted into Part B (wall vent adapter). An arrow indicates insertion.
3. Step 3: Shows Part B (wall vent adapter) being connected to the assembled Part A and Part C. Arrows indicate a downward connection.
4. Step 4: Shows Part D (mounting bracket) being attached to a surface. The assembled vent kit is then attached to this bracket.

Care and Cleaning Instructions

• Do NOT use abrasive cleaners or sharp utensils to clean this product.
• Store the item in a cool, dry place.
• Wipe with a clean dry cloth.

Disposal

• Coopers of Stortford use recyclable or recycled packaging where possible.
• Please dispose of all packaging, paper, cartons in accordance with your local authority recycling regulations.
• At the end of the product's lifespan, please check with your local council authorised household waste recycling centre for disposal.
• Plastics, polybags - this is made from the following recyclable plastic.

Plastic Recycling Information

• At the end of the product's lifespan, please check with your local council authorised household waste recycling centre for disposal.