Dell EMC PowerEdge R340 Getting Started Guide

Before you begin

▲ WARNING: Before setting up your system, follow the safety instructions included in the Safety, Environmental, and Regulatory Information document shipped with the system.

△ CAUTION: Use Extended Power Performance (EPP) compliant power supply units, indicated by the EPP label, on your system. For more information about EPP, see the Installation and Service Manual at Dell.com/poweredgemanuals.

NOTE: The documentation set for your system is available at Dell.com/poweredgemanuals. Ensure that you always check this documentation set for all the latest updates.

NOTE: Ensure that the operating system is installed before installing hardware or software not purchased with the system. For more information about supported operating systems, see Dell.com/ossupport.

Quick Resource Locator: Dell.com/QRL/Server/PER340

Scan the QR code to see how-to videos, documentation, and troubleshooting information.

Setting up your system

NOTE: Ensure that the system is installed and secured. For more information about installing and securing the system into a rack, see the rack documentation included with your rack solution.

  1. Connect the network cable and the optional I/O devices
  2. Connect the system to a power source
  3. Loop and secure the power cable using the retention strap
  4. Turn on the system

Technical specifications

The following specifications are only those required by law to ship with your system. For a complete and current listing of the specifications for your system, see Dell.com/poweredgemanuals.

SpecificationDetails
Power supply550 W Platinum AC 50/60 Hz, 7.4 A-3.7 A (Derated Wattage at 100-120 V - Low Line: 550 W)
Power supply350 W Platinum AC 50/60 Hz, 4.8 A-2.4 A (Derated Wattage at 100-120 V - Low Line: 350 W)
TemperatureMaximum ambient temperature for continuous operation: 35°C/95°F
System battery3 V CR2032 lithium coin cell

NOTE: Certain system configurations may require a reduction in the maximum ambient temperature limit. The performance of the system may be impacted when operating above the maximum ambient temperature limit or with a faulty fan. For information about Dell Fresh Air and supported expanded operating temperature range, see the Installation and Service Manual at Dell.com/poweredgemanuals.

Dell End User License Agreement

Before using your system, read the Dell Software License Agreement that shipped with your system. If you do not accept the terms of agreement, see Dell.com/contactdell.

Save all software media that shipped with your system. These media are backup copies of the software installed on your system.

▲WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

△ CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

NOTE: A NOTE indicates important information that helps you make better use of your product.

Regulatory Information

Regulatory model/type: E58S Series/E58S001

This product complies with Taiwan RoHS standard CNS15663. See http://www.dell.com/learn/tw/zh/twcorp1/envt-info-materials

©2018 Dell Inc. or its subsidiaries. P/N 65T5M Rev.A00

PDF preview unavailable. Download the PDF instead.

all-products/esuprt ser stor net/esuprt poweredge/poweredge-r340 setup-guide ja-jp Adobe PDF Library 15.0; modified using iTextSharp 5.1.3 (c) 1T3XT BVBA

Related Documents

Preview Dell EMC PowerEdge T340 Getting Started Guide
A concise guide to setting up your Dell EMC PowerEdge T340 server, including safety instructions, system setup steps, and technical specifications.
Preview Dell Lifecycle Controller Remote Services Schnellstartanleitung
Diese Schnellstartanleitung von Dell bietet eine Einführung in die Remote Services des Lifecycle Controllers. Sie erläutert die Funktionen, Vorteile und die Integration mit iDRAC sowie die Nutzung von APIs wie WSMAN und Redfish für die effiziente Verwaltung von Servern, einschließlich Bereitstellung, Konfiguration und Firmware-Updates.
Preview Ubuntu Server 20.04 LTS for Dell EMC PowerEdge Servers Release Notes
Official release notes for Ubuntu Server 20.04 LTS on Dell EMC PowerEdge servers, detailing fixes, known issues, compatibility, and support information for system administrators.
Preview Dell EMC PowerEdge R640 and R630 Server Comparison: Features and Specifications
A detailed comparison matrix outlining the key features, specifications, and differences between the Dell EMC PowerEdge R640 and R630 rack servers, covering processors, memory, storage, and more.
Preview Dell EMC PowerEdge Servers: Microsoft Windows Server 2019 Installation Guide
Step-by-step installation guide for Microsoft Windows Server 2019 on Dell EMC PowerEdge servers. Covers preinstalled OS setup, installation via Lifecycle Controller and OS media, drive partitioning, and essential resources.
Preview Dell EMC Systems Management Tools & Documentation Consoles v10.2.0.0 Release Notes
Official release notes for Dell EMC Systems Management Tools and Documentation Management Consoles version 10.2.0.0, detailing new features, enhancements, and fixed issues for server and storage management.
Preview Dell EMC PowerEdge T550 技術ガイド
Dell EMC PowerEdge T550 サーバーの技術ガイド。このドキュメントでは、サーバーの機能、コンポーネント、および管理について詳しく説明しています。
Preview Dell EMC NX3240 System: Getting Started Guide
Concise guide to setting up the Dell EMC NX3240 System, including initial setup steps, safety information, and technical specifications.