Installation Manual-MEAN WELL Switching Power Supply ManufacturerProduct Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Owner's Manual for MEAN WELL models including: MPM-15 Series 15W High Reliable Green Medical Encapsulated Type, MPM-15 Series, 15W High Reliable Green Medical Encapsulated Type, Reliable Green Medical Encapsulated Type, Green Medical Encapsulated Type, Medical Encapsulated Type, Encapsulated Type
MPM-15-5 MEAN WELL - РКС Компоненти - РАДІОМАГ
File Info : application/pdf, 4 Pages, 118.41KB
DocumentDocument15W High Reliable Green Medical Encapsulated Type MPM-15 series User's Manual EN 60601-1 IEC 60601-1 8 BS EN/EN60335-1 ANSI/AAMI ES60601-1 BS EN/EN60601-1 IEC60601-1 TPTC004 Features 2.06"x1.07" compact size Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601-1 and IEC/BS EN/EN60601-1 Suitable for BF application with appropriate system consideration No load power consumption<0.1W Extremely low leakage current Wide operating temp. range -40 ~ +85 EMI class B for class configuration Protections: Short circuit / Overload / Over voltage / Over temperature No minimum load required 3 years warranty ++ Applications Portable medical device Mobile clinical workstation Medical computer monitor Medical examination instrument GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx Description MPM-15 is a 15W high density and small size (52.4*27.2*24mm) AC/DC module type medical power supply series offered in pin type. It features the operation for 80~264VAC, a low no load power consumption less than 0.1W, a high efficiency up to 87%, Class (no FG) double insulation, outstanding dissipation and high lifespan thanks to the interior potting, 2G anti-vibration, high EMC performance, 4KVAC isolation, etc. The design observes IEC/BS EN/EN60601-1 and ANSI/AAMI ES60601-1version three with 2xMOPP level and ultra-low leakage current (<80A). It is very suitable for BF (patient contact) type medical device or relevant equipment. Model Encoding MPM - 15 - 5 Output voltage Rated wattage Series name Downloaded from Arrow.com. File Name:MPM-15-SPEC 2024-04-15 M P M - 1 5 15W High Reliable Green Medical Encapsulated Type series SPECIFICATION MODEL MPM-15-3.3 MPM-15-5 MPM-15-12 MPM-15-15 MPM-15-24 DC VOLTAGE 3.3V 5V 12V 15V 24V RATED CURRENT 3.5A 3A 1.25A 1A 0.63A OUTPUT CURRENT RANGE Note.2 0 ~ 3.5A PEAK CURRENT 3.85A RATED POWER 11.6W PEAK LOAD(10sec.) Note.3 12.7W RIPPLE & NOISE (max.) Note.4 150mVp-p VOLTAGE TOLERANCE Note.5 ±2.0% LINE REGULATION ±0.5% 0 ~ 3A 3.3A 15W 16.5W 150mVp-p ±2.0% ±0.5% 0 ~ 1.25A 1.38A 15W 16.6W 150mVp-p ±2.0% ±0.3% 0 ~ 1A 1.1A 15W 16.5W 180mVp-p ±2.0% ±0.3% 0 ~ 0.63A 0.69A 15.1W 16.6W 180mVp-p ±2.0% ±0.3% LOAD REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1500ms, 30ms/230VAC 1500ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 40ms/230VAC 10ms/115VAC at full load VOLTAGE RANGE Note.6 80 ~ 264VAC 113V~370VDC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 83.5% 85.5% 86.5% 87% INPUT AC CURRENT (Typ.) 0.6A/115VAC 0.3A/230VAC INRUSH CURRENT (Typ.) COLD START 20A/115VAC 45A/230VAC LEAKAGE CURRENT (max.) Note.7 Touch current <80A/264VAC 86.5% OVERLOAD 110% ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE 3.8 ~ 5V 5.8~ 6.8V 13.8 ~ 16.2V Protection type : Shut off o/p voltage, clamping by zener diode 17.3 ~ 20.3V 27.6 ~ 32.4V ENVIRONMENT OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT SOLDERING TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +85 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH non-condensing ±0.03%/ (0 ~ 60) Wave soldering: 265,5s (max.); Manual soldering: 390,3s (max.) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes OPERATING ALTITUDE Note.8 5000 meters SAFETY STANDARDS IEC 60601-1:2005+A1,TUV BS EN/ EN 60601-1:2006+A1+A12+A2,ANSI/AAMI ES60601-1:2005/A2:2021, CAN/CSA C22.2 No. 60601-1:2014+A2,IEC 60335-1:2010/AMD2:2016, Dekra BS EN/ EN 60335-1:2012+A11+A13+A1+A14+A2+A15 ,EAC TP TC 004 approved ISOLATION LEVEL Primary-Secondary: 2xMOPP WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P:4KVAC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Parameter Standard Test Level / Note Conducted emission BS EN/EN55011 (CISPR11) Class B EMC EMISSION SAFETY & EMC (Note.9) Radiated emission Harmonic current Voltage flicker BS EN/EN55035, BS EN/EN60601-1-2 Parameter ESD BS EN/EN55011 (CISPR11) BS EN/EN61000-3-2 BS EN/EN61000-3-3 Standard BS EN/EN61000-4-2 Class B Class A ----- Test Level / Note Level 4, 15KV air ; Level 4, 8KV contact EMC IMMUNITY RF field susceptibility EFT bursts Surge susceptibility Conducted susceptibility Magnetic field immunity BS EN/EN61000-4-3 BS EN/EN61000-4-4 BS EN/EN61000-4-5 BS EN/EN61000-4-6 BS EN/EN61000-4-8 Level 3, 10V/m( 80MHz~2.7GHz ) Table 9, 9~28V/m( 385MHz~5.78GHz ) Level 3, 2KV Level 3, 1KV/Line-Line Level 3, 10V Level 4, 30A/m Voltage dip, interruption BS EN/EN61000-4-11 100% dip 1 periods, 30% dip 25 periods, 100% interruptions 250 periods MTBF OTHERS DIMENSION 7319.8K hrs min. Telcordia SR-332 (Bellcore) ; 1210.0K hrs min. MIL-HDBK-217F (25) 52.4*27.2*24mm (L*W*H) or 2.06*1.07*0.94 inch NOTE PACKING 0.056Kg; 240pcs/14.4Kg/0.94CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. No minimum load required. 3. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 4. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. 5. Tolerance : includes set up tolerance, line regulation and load regulation. 6. Derating may be needed under low input voltages. Please check the derating curve for more details. 7. Touch current was measured from primary input to DC output. 8. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 9. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf ) Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:MPM-15-SPEC 2024-04-15 Downloaded from Arrow.com. M P M - 1 5 15W High Reliable Green Medical Encapsulated Type series Block Diagram I/P EMI FILTER RECTIFIERS & POWER SWITCHING FILTER RECTIFIERS & FILTER fosc : 100KHz +V -V O.L.P. PWM CONTROL DETECTION CIRCUIT Derating Curve 100 80 70 50 30 3.3V,5V 12V~24V LOAD (%) -40 -30 -20 -10 0 10 20 30 40 50 55 60 70 80 85 AMBIENT TEMPERATURE () (HORIZONTAL) Output Derating VS Input Voltage 100 90 80 70 60 50 40 80 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz LOAD (%) Downloaded from Arrow.com. File Name:MPM-15-SPEC 2024-04-15 M P M - 1 5 15W High Reliable Green Medical Encapsulated Type series Mechanical Specification Case No.219A Unit:(mm) 3.2 52.4 3.4 45 AC/N -V +V AC/L BOTTOM VIEW 3.2 8 1.04 24 3.5±1mm P/N diameter:1.04 SIDE VIEW 20.8 27.2 Installation Manual Please refer to : http://www.meanwell.com/manual.html Downloaded from Arrow.com. File Name:MPM-15-SPEC 2024-04-15