User Guide for SATECHI models including: Dual USB C Docking Station and Stand, USB C Docking Station and Stand, Docking Station and Stand, Station and Stand, Stand

Dual Dock Stand - EN

User guide (PDF)

Satechi Dual USB C Docking Station and Stand, with 2 HDMI Ports, Display Port, USB C and USB A Data Ports, 1 Ethernet Port, SATA and NVMe SSD Enclosure - for MacBook Pro/Air and Type C Devices : Electronics

Satechi Dual USB C Docking Station and Stand, with 2 HDMI Ports, Display Port, USB C and USB A Data Ports, 1 Ethernet Port, SATA and NVMe SSD Enclosure - for MacBook Pro/Air and Type C Devices

ST-DDSM User Guide (PDF) Satechi Satechi Satechi,Dual,USB,C,Docking,Station,and,Stand,,with,2,HDMI,Ports,,Display,Port,,USB,C,and,USB,A,Data,Ports,,1,Ethernet,Port,,SATA,and,NVMe,SSD,Enclosure,-,for,MacBook,Pro/Air,and,Type,C,Devices,,

PDF preview unavailable. Download the PDF instead.

614iFTAMbYL
QUICK GUIDE
DUAL DOCK STAND
DOCKING STATION WITH NVME SSD ENCLOSURE
1

Connect the dual cable connectors to the dual USB-C ports on your host device. Both cables must be connected in order for full functionality
2

If using with a host device other than a MacBook, slide the aluminum cable cover down to release the cables. Both cables must be connected in order for full functionality

3

5Gbps

10Gbps

DP 4K/60Hz

HDMI 4K/60Hz

HDMI 4K/60Hz

5Gbps

10Gbps

ON

OFF

ON

OFF

Slide the power switch to the left from red to green in order to turn on the Dock. White LED will turn on signifying the dock is on

ON

OFF

4
HDMI 4K/60Hz

PORTS AND CONNECTORS

HDMI 4K/60Hz

5Gbps

10Gbps

ON

OFF

5
5Gbps

10Gbps

DP 4K/60Hz

HDMI 4K/60Hz

HDMI 4K/60Hz

5Gbps

UP TO
75W
Use the USB-C PD port to charge your device up to 75W. ~15W is used for the docks operation USB-C charging port does not support video output or data transfer

6
5Gbps

10Gbps

DP 4K/60Hz

HDMI 4K/60Hz

HDMI 4K/60Hz

5Gbps

UP TO
4K/60Hz
Use HDMI cables to connect up to two HDMI-enabled monitors. Dual Display not supported on M1/M2 MacBooks

7

5Gbps

10Gbps

DP 4K/60Hz

UP TO
4K/60Hz
Use DisplayPort cable to connect to a DisplayPort-enabled monitor. DisplayPort connection supports up to 4K/60Hz. Dual monitors supported when using HDMI port to the left of USB-C data port

8
5Gbps

10Gbps

DP 4K/60Hz

HDMI 4K/60Hz

HDMI 4K/60Hz

5Gbps

UP TO
1 Gbps
Connect an RJ45 Ethernet cable to the dock's Gigabit Ethernet port. Up to 1 Gbps

9
10Gbps

DP 4K/60Hz

HDMI 4K/60Hz

HDMI 4K/60Hz

5Gbps

10Gbps

UP TO
5 Gbps
Use the USB-C port and USB-A port for data transfer ­ up to 5 Gbps each. Does not support charging or CD readers, including Apple SuperDrive

UP TO
10 Gbps
Use the USB-C port and USB-A port for data transfer ­ up to 10 Gbps each. Does not support charging or CD readers, including Apple SuperDrive

Prior to connecting or disconnecting power to the dock please make sure all external drives are properly ejected. Dock supports only two display output maximum.

INSTALLING SSD
1

5Gbps

10Gbps

DP 4K/60Hz

HDMI 4K/60Hz

HDMI 4K/60Hz

5Gbps

10Gbps

ON

OFF

Before installing, ensure the Dual Dock Stand is not connected to power. Prior to disconnecting power please eject all external drives connected to the Dock. Disconnect from host device and disconnect any power delivery cables connected to the Dock

2

3

To install the SSD, press and lift the latch on the SSD cover.

Remove the film from both sides of the included thermal pad and align the holes on the thermal pad with the screw openings.

4
1. INSERT

5
2. PUSH

Insert the SSD (not included) at an angle and faceup with the pins aligned and push down to align the SSD with the screw hole.

Use the included screw and screwdriver to secure the SSD into place. To avoid stripping the screw, please do not over tighten.

Not compatible with SSDs with preinstalled heat-sinks.

6

CLICK!

7

Reinstall the SSD cover. Insert at an angle and press down until it clicks.

Turn the dock over and place your host device on top of the Dock Stand.

8

9
HDMI 4K/60Hz

5Gbps

10Gbps

ON

OFF

Connect the dual cable connectors to the dual USB-C ports on your host device. Both cables must be connected in order for full functionality

Connect Dual Dock Stand to the power source. Prior to connecting power please make sure all external drives are disconnected from the Dock.

10

5Gbps

10Gbps

DP 4K/60Hz

HDMI 4K/60Hz

HDMI 4K/60Hz

5Gbps

10Gbps

ON

OFF

ON

OFF

Slide the power switch to the left from red to green in order to turn on the Dock. White LED will turn on signifying the dock is on

ON

OFF

If using with a new Solid-State Drive, please ensure the drive is properly formatted to support your host device operating system.


Adobe PDF library 17.00 Adobe Illustrator 27.8 (Windows)