This document outlines essential procedures for conducting node acceptance tests on the Cisco ONS 15454 DWDM platform. These tests are crucial for verifying the proper installation and operational status of various cards and components within the DWDM node before integrating it into the network.
The guide covers a range of specific test procedures, including those for terminal and hub nodes equipped with 32MUX-O, 32DMX-O, 40-MUX-C, and 40-DMX-C cards. It also details tests for amplifiers, optical service channels, and different node configurations like ROADM and Anti-ASE hub nodes.
Key procedures include:
- NTP-G41: Terminal or Hub Node with 32MUX-O and 32DMX-O Cards Acceptance Test
- NTP-G168: Terminal or Hub Node with 40-MUX-C and 40-DMX-C Cards Acceptance Test
- NTP-G42: Terminal Node with 32WSS and 32DMX Cards Acceptance Test
Each procedure provides detailed steps, required tools and equipment, prerequisite tasks, and security level considerations. The document emphasizes verifying optical power levels, signal integrity, and alarm status to ensure optimal performance.
For detailed instructions and troubleshooting, refer to the specific sections within this guide, such as the DLP-G268, DLP-G79, and DLP-G80 tasks for provisioning and verification.
