Zero 88 CITP Protocol
The CITP protocol is a lighting protocol that transmits DMX data over Ethernet. It enables the sending of multiple DMX universes through a single Ethernet cable, designed for seamless communication between lighting consoles, visualizers, and media servers.
Key Features and Usage
CITP is predominantly used to link ZerOS lighting consoles with Capture visualization software. This integration facilitates two-way control and selection communication, making it the recommended protocol when using Capture visualization software.
CITP data can be transmitted from the Phantom ZerOS PC software to Capture visualization software without requiring a Phantom ZerOS Unlock Dongle.
For further details on Capture Visualisation software, click here.
For more information on the CITP protocol, click here.
CITP Configuration
Within the CITP panel, users can enable CITP and configure its protocol settings. By default, CITP universes are mapped 0:1 with Desk Universes.
A 'Reset to defaults' option is available if CITP settings have been modified per Desk Universe. This action prompts the user to choose whether to start Universe numbering from CITP Universe 0 or CITP Universe 1. For Capture visualization software, starting at CITP Universe 0 is recommended.
The CITP panel also allows for configuration of network settings, including options for a DHCP address or a static IP address. CITP defaults to using DHCP.
For detailed information on network settings, refer to the Networking chapter.
Data Transmission and Control
Selection: When using CITP for communication between ZerOS and Capture visualization software, selection information is transmitted alongside DMX data over Ethernet. Selected fixtures are visually highlighted in red within Capture.
External Level Set: CITP enables Capture to send DMX information back to ZerOS. This functionality allows users to control fixtures directly from Capture, with parameter values updating live in ZerOS. The command line in ZerOS will display 'External Level Set' as updates are received.
In Capture, users can right-click on a stage position to move selected moving lights to that location. This movement can then be recorded as a cue or palette in ZerOS.
