TP-Link USB to Ethernet Network Adapter User Guide

ATTENTION & Safety Precautions

When the product has a power button, it serves as one way to shut off the product. If there is no power button, the only way to completely shut off power is to disconnect the product or its power adapter from the power source.

• Do not attempt to disassemble, repair, or modify the device. For service, please contact TP-Link.
• Keep the device away from water, fire, humidity, or hot environments.
• Operating Temperature: 0°C~40°C (32°F ~104°F).

Recycling Information

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU to minimize its impact on the environment. Users can choose to give their product to a competent recycling organization or to the retailer when purchasing new electrical or electronic equipment.

Declarations of Conformity & Compliance

TP-Link declares that the device complies with essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity is available at https://www.tp-link.com/en/support/ce/.

TP-Link also declares compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016 in the UK. The original UK declaration of conformity is available at https://www.tp-link.com/support/ukca/.

For technical support, replacement services, user guides, and more information, please visit https://www.tp-link.com/support/.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

TP-Link USA Corporation has determined that the equipment shown has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment, and the equipment is properly maintained and operated.

Issue Date: 2023-12-25

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Using the Adapter

This adapter supports Plug and Play feature. Plug it in and wait for seconds. Then this adapter is ready to use.

For Windows 7/8/8.1, Mac OS X 10.8 to 10.15 (UE330C, UE330, UE300, UE200):

For Windows 7/8/8.1, please click to install a driver if prompted. For Windows 7, click CANCEL if prompted "The program might not have installed correctly" after installation.

For Mac OS X 10.8 to 10.15, please download and install a driver by visiting the official website www.tp-link.com and searching the model number.

For Windows 7, Mac OS X 10.9 to 10.15 (UE300C, UE306):

Please download and install a driver by visiting the official website www.tp-link.com and searching the model number.

Nintendo Switch Support

Works with Nintendo Switch (Supported by UE306 ONLY).

Connection Diagrams

Diagram 1: Standard USB to Ethernet Connection

Illustration shows a USB to Ethernet adapter connected to a computer's USB port. An Ethernet cable is plugged into the adapter's RJ45 port, connecting to a wired network.

Diagram 2: Nintendo Switch Connection (UE306 Only)

Illustration shows a UE306 adapter connected to a Nintendo Switch's USB port. An Ethernet cable is plugged into the adapter's RJ45 port, connecting to a wired network.

LED Explanation

For UE330C, UE330:

For UE300C, UE300, UE200, UE306:

Safety Notices & Statements

BSMI Notice (Taiwan)

Safety Consultation and Precautions:

• Use the original power adapter or only use the power type specified for this product.
• Disconnect the power cord before cleaning the product. Do not use liquid, spray cleaners, or a damp cloth for cleaning.
• Beware of moisture; do not splash water or other liquids onto the product.
• Slots and openings are for ventilation to ensure reliable operation and prevent overheating. Do not block or cover openings.
• Do not place the product near heat sources. Do not place it in an enclosed space without normal ventilation.
• Do not open the casing privately. If the product is faulty, please contact the manufacturer or agent.

Restricted Substances Statement (Taiwan)

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2: "O" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3: "-" indicates that the restricted substance corresponds to the exemption.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Ukrainian Compliance Statement

The product is certified according to the rules of the UkrSEPRO system for compliance with the requirements of regulatory documents and requirements established by current legislation of Ukraine.

Explanation of Symbols on Product Label

Note: The product label can be found at the bottom of the product (and its I.T.E power supply if any). Symbols may vary from products.