BILITOK

Important Safety Instructions

Operating Surroundings

• Do not use or store the massage chair under damp environment: i.e. bathroom, sauna, spa to avoid any moldy, electric shock, fire or mechanical failure.
• Don't use the massage chair outdoors.
• Don't use the massage chair under dusty, smeary and anoxic conditions.
• Don't place the massage chair near heater, stove or sunlight radiation to avoid inner components overheating to cause fire.
• Make sure to place the massage chair on a flat level ground.
• To avoid an electric shock, please make sure to connect an earth wire.
• Don't use the machine while smoking.

Following Conditions Should Consult Doctors Before Use

• Suffered from malignant tumor.
• Serious heart disease.
• Serious skin disease.
• Serious bone hyperplasia.
• In pregnancy of during the menses.
• Be on the rest cure under the doctor's supervision.
• The back bended exceptionally by the accident or disease.
• Needing peaceful surroundings.
• Arthritis disease.
• Implanted pacemaker for medical purpose.
• Suffered from bowels disease (i.e. gastritis, enteritis, diarrhea, hepatitis).
• Serious circulation trouble.
• Consciousness trouble.
• Be in hyper pyretic.

⚠️ WARNING

Children under 18 ages or special persons (as psychopathic, the mental defects, the paralysis) are not allowed to operate the massage chair, in case of electric shock, injuries or mechanism malfunctions.

CAUTIONS

For safety reasons and in order to clearly indicate potential dangers should the product be used improperly, instructions have been marked in the following manners and should be strictly noted.

• Non-professional technicians are not allowed to dismantle or repair to avoid fire, electrical shock or serious hurt. [prohibited]
• Do not flush to the switch when cleaning to avoid insulation fault, electrical shock or short-circuit. [prohibited]
• When storing or maintenance, be sure to disconnect the power plug from socket. [prohibited]
• Do not detach the plug by wet hands. [prohibited]
• Make sure to shut off and detach the power plug when cleaning or storing product. [prohibited]
• During cleaning or moving the machine, make sure to detach power cord to avoid fire or electrical shock. [prohibited]
• Do not place the machine onto an unstable surface to avoid roast, insulation failure, electrical shock or turnover. [prohibited]
• When storing the machine, make sure to disconnect power plug to avoid fire caused by electricity leaking. [prohibited]
• Clean power plug periodically to avoid fire due to dust. [prohibited]
• Do not use it at any unsafe places or on other purposes. It is the main reason of product damage or accident. [prohibited]
• Do not store the machine onto an unstable surface. Unexpected earthquake or external force will cause damage or injury. [prohibited]
• Keep supply cord unobstructed at all time, i.e. not twisted, knotted, over flexed or pulled and do not place anything heavy on it.
• The appliance has a heated surface. Persons insensitive to heat must be careful when using the appliance.
• Do not modify the structure or change components by unauthorized person. [prohibited]
• Do not dismantle the machine by unauthorized person to avoid electrical shock, short-circuit or fire. [prohibited]
• Do not store it near a fire or flammable substances. It is one of the reasons of causing product torture, deviation or damage. [prohibited]
• Should any abnormality occur (i.e. scorching smell), stop using immediately and detach power plug from socket. [prohibited]
• Keeping operating under an abnormal situation will cause fire or electrical shock, please contact your local seller or authorized service agent for maintenance.
• Only rated voltage must be used. [prohibited]
• Stop using immediately if supply cord or power plug be damaged or loosen. [prohibited]
• Be sure to keep children away during operating to avoid any hazard. [prohibited]
• Do not explore it under sunshine at all time. [prohibited]
• If the supply cord is damaged, it must be replaced by the manufacturer or its authorized persons for repair or maintenance to avoid any hazard. [prohibited]

Trouble Shooting

Checking is necessary in frequent usage. Make sure the machine works normally before usage.

Installation Steps of Remote Control Bracket

Step 1: Insert the screw rod into the hole.

Step 2: Install the remote control on the bracket.

Step 3: Open the plastic buckle on the back of the controller to adjust the height of the controller bracket.

[Description of diagram showing bracket assembly and attachment to the chair]

Hand Controller Operation Instructions

[Diagram of hand controller with numbered buttons and labels. The following lists the functions corresponding to the numbers.]

• 1. Fully automatic: Sets five modes.
• 2. Zero-G: Reclines/resets the massage chair.
• 3. Hip massage: Turns the cushion massage function on/off.
• 4. Constant temperature hot compress: Turns the hot compress function for calf and waist on/off.
• 5. Knead the sole of the foot: Adjusts scraping speed (2 gears, cycles through gears).
• 6. Rebound: Long press to adjust the reset and pick-up function.
• 7. Declination: Long press to adjust the recline function.
• 8. Air bag Auto: Turns the whole body airbag massage on/off.
• 9. Automatic back: Turns back movement massage on/off.
• 10. Shoulder arm pinch: Turns shoulder arm airbag pinch massage on/off.
• 11. Hip Pinch: Turns hip airbag clamping massage on/off.
• 12. Leg airbag pinch: Turns leg airbag pinch massage on/off.
• 13. Air pressure +: Increases airbag extrusion force.
• 14. Air pressure -: Decreases airbag extrusion force.
• 15. Kneading mode: Turns neck kneading massage on/off.
• 16. Massage mode: Turns waist massage on/off.
• 17. Mode selection: Selects massage movement direction (positive/negative).
• 18. Speed +: Increases massage speed.
• 19. Speed -: Decreases massage speed.

Specification

Massage Procedure Instructions

Start/Timing/Shutdown: Press once to start/timing. Long press to shut down.

Start: When power is on, press this button to enter automatic mode. Default working time is 15 minutes.

Timing: When the massage chair is working, press this button to enter timed mode. Each press increases time by 5 minutes.

Shutdown: When the massage chair is working, press and hold this button until the display screen turns off.

At the end of working hours, the massage chair will maintain its working posture. To reset it to the original posture, please press the power button again.

• 1. Fully automatic: Press this key to set five modes, and select F1 / F2 / F3 / F4 / F5.
• 2. Zero gravity: Press this key to recline / reset the massage chair.
• 3. Hip massage: Press this key to turn on / off the cushion massage function.
• 4. Constant temperature hot compress: Press this key to turn on / off the constant temperature hot compress function of calf and waist.
• 5. Knead the sole of the foot: Press this key to turn on the function. The scraping speed on the screen will display 2 gears by default. Each time you press it, it will increase by one gear. If you press the third gear again, it will turn off the function and turn it on again, and so on.
• 6. Rebound: Long press this key to adjust the reset and pick up function of massage chair (long press is effective).
• 7. Declination: Long press this key to adjust the recline function of massage chair (long press is effective).
• 8. Air bag Auto: Press this key to turn on / off the whole body airbag squeeze massage.
• 9. Automatic back: Press this key to turn back movement massage on / off.
• 10. Shoulder arm pinch: Press this key to turn on / off shoulder arm airbag pinch massage.
• 11. Hip Pinch: Press this key to turn on / off hip airbag clamping Massage.
• 12. Leg airbag pinch: Press this key to turn on / off leg airbag pinch massage.
• 13. Air pressure +: The air bag extrusion force increases.
• 14. Air pressure -: The pressure of the air bag is reduced.
• 15. Kneading mode: Press this key to turn on / off neck kneading massage.
• 16. Massage mode: Press this key to turn on / off waist massage.
• 17. Mode selection: Press this key to select the direction of the massage movement (positive/negative).
• 18. Speed +: The speed of the massage movement increases.
• 19. Speed -: The speed of the massage movement slows down.

Bluetooth Connection Instructions

1. Turn on the Bluetooth voice prompt by default.
2. Turn on the Bluetooth function of your mobile phone to search for "BluetoothFind" native Bluetooth code "A MY-888". Turn on the music and start playing when the connection is successful.

Reminder

Constant temperature hot compress and hip massage need to be turned on or off manually. Automatic mode does not enable these two functions.

Connection Points

[Description of connection points and cable management:]

• Tear open the protective film.
• Align cushion socket and massage chair trachea.
• Align seat socket and massage chair trachea.
• Align head pillow trachea and massage chair back trachea.
• Locate power line socket, power switch, and fuse port.
• Ensure the back of the cloak is pasted correctly to the back of the massage chair.
• Connect the cloak heating socket to the massage chair cushion socket.

Moving the Chair

When you move the chair, press the back and raise the front.

Attention

1. Please check and confirm if the power cord has been pressed under the massage chair.
2. Check if the ground line is connected well.
3. Before inserting the plug, make sure that all operation buttons, including the power switch, are turned off.

Chair Components

[Diagram labeling the parts of the massage chair:]

• Shoulder air bag
• Neck massage
• Waist massage
• Arm air bag
• Hip air bag
• Hips vibration
• Leg air bag
• Foot air bag
• Armrest
• Power switch
• Wheel

Safety Instructions

1. Should any abnormality occur, shut off and detach the power plug from the socket.
2. When the power cord is damaged, it must be changed with a special power cord or one available from another manufacturer or service department.

Warning: Do not dismantle, modify, or change components by unauthorized person to avoid electric shock or fire.

Daily Care and Maintenance

Storage Guide

• Do not dismantle the chair. Electrical shock may happen if you touch inner elements.
• Do not dismantle the machine by unauthorized person to avoid electric shock or fire.
• Make sure to shut off and detach the power plug when cleaning to avoid electric shock or hazard.
• Keep the massage chair clean and free of dust. Do not place the massage chair in a damp environment.
• If not in use for a long period, please cover it with a cloth to prevent dust.
• Do not place the massage chair under direct sunlight.

Maintenance

• Use neutral detergent only.
• Use neutral detergent to clean back cushion, head cushion, and leg cushion. Let them dry.
• Use detergent and cloth to clean the plastic, pipe, and leather material of the massage chair.
• Make sure not to use organic solvents such as gasoline, amyl acetate, or benzene for cleaning to avoid leather color fading, aging, or cracking.
• Do not spray pesticide to avoid electric shock or fire.
• Please clean with a dry cloth to avoid mechanical failure.

Controller Maintenance

• Do not place the massage chair near a heater or fire.
• Keep away from dampness to avoid electric shock.
• Please clean dust with a soft cloth or a small banister brush.
• Make sure not to use volatile detergents such as benzene, gasoline, or amyl acetate.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.