GXMO User Manual

1. Basic Operation

This section details the physical components and basic setup of your GXMO device.

Device Ports and Buttons

The GXMO device is equipped with various ports and a power button for its functions.

Front Panel

• 1. Power button: Used to turn the device on or off.
• 2. USB 3.0 port: For connecting high-speed USB peripheral devices.
• 3. Type-C port: For connecting Type-C cables or devices.
• 4. Headphone microphone jack: For connecting audio input/output devices.

Diagram Description: The front view of the GXMO device is illustrated, with numbered indicators pointing to the Power button, USB 3.0 port, Type-C port, and Headphone microphone jack.

Back Panel

• 5. LAN port: For connecting to a wired network (ethernet cable).
• 6. USB 2.0 port: For connecting standard USB peripheral devices.
• 7. HDMI port: For connecting to a display device via HDMI cable.
• 8. DC in port: For connecting the power adapter.

Diagram Description: The back view of the GXMO device is illustrated, with numbered indicators pointing to the LAN port, USB 2.0 port, HDMI port, and DC in port.

Mounting Options

The device can be mounted in different ways for convenience.

• Wall-Mounted bracket: Instructions show how to fix the bracket onto a MINI PC using screws.
• Display Mounting: Instructions show how to fix the bracket onto the back of a display with screws.

Diagram Description: Two illustrations demonstrate the wall-mounting bracket. One shows the bracket being attached to the side of a Mini PC, and the other shows it being attached to the rear of a monitor.

FCC Warning

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) this device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure.

⚠️ Diagram Description: A warning triangle symbol indicates potential hazards related to power adapter usage.

Failure to use the included power adapter may violate regulatory compliance requirements and may expose the user to safety hazards.

* Specifications are subject to the physical product.

Precautions for Use

To ensure optimal performance and longevity, please observe the following precautions:

• Do not use harsh chemical solvents or cleaning products. We recommend using a soft cloth to wipe.
• Do not throw product into fire; avoid fire accidents.
• Do not attempt to open the housing or to repair. If a failure occurs, please contact customer service.
• Be cautious of seepage while cleaning electronics to avoid electric shock.
• Check for any frayed or damaged cords or plugs.
• Do not arbitrarily discard the product; help protect the environment.
• Work environment: 5°C—35°C, 30%—90% humidity.
• Storage environment: -20°C—60°C, 10%—90% humidity.