Dormakaba ProGreen Sliding Door System

Product Overview

This document provides technical specifications and installation details for the Dormakaba ES 250 PRO and ES 400 PRO ProGreen sliding door systems. These systems are designed for automatic operation and feature insulating glass with fixed parts and floor guides.

System Variants and Capacities

The ProGreen sliding door system is available in the following configurations:

ES 250 PRO / ES 400 PRO

Configuration	Passage Width (LW)	Weight Capacity	Minimum System Width (B min.)
1-leaf	700-3000 mm	ES 250 PRO: 1 x 125 kg ES 400 PRO: 1 x 250 kg	2 x LW + 153 mm (with fixed part/with post width 63mm)
2-leaf (Standard)	800-3000 mm	ES 250 PRO: 2 x 125 kg ES 400 PRO: 2 x 200 kg	2 x LW + 180 mm (with fixed part/without post width)

Note: For doors with side panels and LM supports (through mounting), if the door leaf weight exceeds approximately 125 kg, a drive suspension or a drive variant with a height of 150 mm is required, depending on the clear width of the door.

Key Dimensions and Guidelines

FFL: Finished Floor Level

LW: Passage Width

LH: Clearance Height

H: Installation Height

System Width (B): The overall width of the door system.

Attention! The safety equipment of the automatic door must correspond to the risk analysis according to DIN 18650.

According to EN 16005/DIN 18650 Construction and testing principles for automatic doors, the gap dimension (X) may only be 4-8 mm.

Waste water connection: 1" optional.

Weight restriction: Observe table.

Installation Details

The document includes detailed diagrams illustrating various installation configurations, including:

Insulating glass with fixed part and recessed floor rail.
Optional hooking configurations.
Details of the drive mechanism, including removable drive covers and hood hatches.
Mechanism hanger details.
Receiving post with insulating glass and floor guide.

Specific dimensions are provided for each component and configuration to ensure proper installation.

Important Notices

Copyright: Distribution and reproduction of this document, use and communication of their content is not permitted unless expressly granted. Violations oblige to pay compensation. All rights in the case of the granting of patents or registration of utility models.

Document Information:

Drawing Number: 257693-00-6-60
Version: Var. 00
Manufacturer: dormakaba GmbH + Co.KG (DE) Ennepetal
Date of Issue: October 2021

	dormakaba ES 250 PRO/ES 400 PRO FST Series: Operating Instructions Official operating instructions for dormakaba ES 250 PRO and ES 400 PRO automatic sliding door systems. Covers safety, product description, technical data, maintenance, and troubleshooting.
	dormakaba ES 200 ST TST Automatic Sliding Door Systems This technical brochure details the dormakaba ES 200 ST TST series of automatic sliding and telescopic door systems. It covers various configurations like FLEX, FLEX Green, MANET, and PURE, along with their features, technical specifications, dimensions, and compliance with safety standards DIN 18650 and EN 16005. Key advantages include energy efficiency, design flexibility, and robust safety features.
	Dormakaba ES 250 PRO/ES 400 PRO Mounting Instructions Comprehensive mounting instructions for Dormakaba ES 250 PRO, ES 250 PRO FST, ES 400 PRO, and ES 400 PRO FST sliding door operators. This guide covers safety, product details, mounting procedures, CAN BUS systems, commissioning, and parameterization.
	Dormakaba ES 250/400 PRO/FST Sliding Door Operation Manual Operation manual for Dormakaba ES 250 PRO, ES 250 PRO FST, ES 400 PRO, and ES 400 PRO FST sliding door units. Covers safety, operation, cleaning, and troubleshooting.
	dormakaba Automatic Doors: Sliding, Revolving, Special, and Swing Door Solutions Explore dormakaba's comprehensive range of automatic door systems, including sliding, revolving, special, and swing doors, along with operators, profile systems, accessories, and technical support services.
	dormakaba ES 200 Easy Sliding Door Operator: Features, Specifications, and Accessories Comprehensive overview of the dormakaba ES 200 Easy sliding door operator, detailing its flexible, simple, and modular design, technical specifications, features, advantages, and available accessories. Includes contact information for global offices.
	MUTO Premium XL120 Installation Manual: Ceiling Mount Sliding Door System Comprehensive installation manual for the dormakaba MUTO Premium XL120 ceiling mount sliding door system, detailing technical specifications, safety instructions, and step-by-step assembly for glass doors.
	Environmental Product Declaration: dormakaba ES PROLINE Automatic Drive System This Environmental Product Declaration (EPD) for the dormakaba ES PROLINE Modular Automatic Drive System for Sliding Doors provides a comprehensive life cycle assessment (LCA) of its environmental impacts, technical specifications, and material composition, adhering to ISO 14025 and EN 15804 standards.